Headset World USA Replacement Ear Hook User Manual

1. Introduction

This manual provides instructions for the proper installation and care of your Headset World USA Replacement Ear Hook. This ear hook is specifically designed for use with Yealink WH63 and Yealink WH67 wireless headsets only. It is crucial to verify your headset model for compatibility before attempting installation.

Important Compatibility Note: This ear hook will not fit any other Yealink models or other brands of headsets. Attempting to use it with incompatible models may result in damage to the ear hook or your headset.

2. Setup and Installation

Follow these steps to correctly attach the ear hook and eartip to your Yealink WH63 or WH67 headset.

Image 1: Step-by-step diagram illustrating how to attach the ear hook and eartip to the headset. The diagram shows the headset body, followed by the ear hook, then the eartip, and finally the fully assembled headset with the ear hook rotated into position.

1. Prepare the Headset: Ensure your Yealink WH63 or WH67 headset is clean and free from any debris where the ear hook will attach.
2. Attach the Ear Hook: Align the connector on the replacement ear hook with the corresponding slot on the headset body. Gently push the ear hook onto the headset until it clicks securely into place. Refer to the first two steps in Image 1.
3. Install the Eartip: Take the eartip and align its opening with the speaker nozzle of the headset. Gently push and twist the eartip onto the nozzle until it is firmly seated. Refer to the third step in Image 1.
4. Adjust the Ear Hook: Once both the ear hook and eartip are attached, you can rotate the ear hook to the desired wearing position for comfort and stability. The ear hook should sit comfortably over your ear. Refer to the final step in Image 1, showing the ear hook rotated.

3. Operating Instructions

Once installed, the ear hook provides a secure and comfortable fit for your Yealink WH63 or WH67 headset. Place the headset with the ear hook over your ear, ensuring the eartip is comfortably positioned in your ear canal and the microphone boom (if applicable) is correctly aligned towards your mouth.

4. Maintenance and Care

• Cleaning: Use a soft, dry, or slightly damp cloth to wipe the ear hook. Avoid harsh chemicals or abrasive cleaners.
• Storage: Store the ear hook in a clean, dry place when not in use, away from direct sunlight or extreme temperatures.
• Handling: Handle the ear hook gently to prevent bending or breaking.

5. Troubleshooting

• Ear Hook Does Not Fit:

  Ensure your headset is a Yealink WH63 or WH67 model. This ear hook is not compatible with other models. Double-check the alignment during installation as described in Section 2.

• Ear Hook Feels Loose:

  Verify that the ear hook is fully pushed onto the headset until it clicks into place. If it continues to feel loose, inspect for any damage to the ear hook or headset connector.

6. Specifications

7. Support and Contact Information

Headset World USA is an authorized partner for Yealink products. For any questions regarding compatibility, installation, or product support, please contact Headset World USA directly.

Refer to your purchase documentation or the Headset World USA website for specific contact details.