1. Important Safety Instructions
Please read and understand all instructions before assembling and using this product. Keep this manual for future reference.
- Ensure the power is disconnected before assembly, disassembly, or cleaning.
- Do not operate the lamp with a damaged cord or plug. If damaged, contact qualified service personnel.
- This lamp is designed for indoor use only. Do not expose to water or high humidity.
- Use only the specified bulb type and wattage (9W LED E26 bulb included).
- Keep the lamp away from flammable materials.
- Ensure the lamp base is stable on a flat surface to prevent tipping.
2. Package Contents
Verify that all components are present before beginning assembly:
- Lamp Base
- Lamp Pole Sections (multiple)
- Lamp Head with Bulb Socket
- Fabric Lampshade
- Socket Ring
- 9W LED Bulb (E26)
- Foot Pedal Switch (integrated into power cord)
Image: All lamp components
Image: Included 9W LED E26 Bulb
3. Assembly Instructions
Follow these steps to assemble your floor lamp:
- Install the Lampshade: Unroll the fabric lampshade. Attach the lampshade to the metal rings using the clips provided, then secure the vertical seam with the Velcro strip. Ensure the shade forms a perfect cylinder.
- Assemble the Pole: Carefully screw the lamp pole sections together from top to bottom. Ensure each section is tightly connected to prevent leaning.
- Attach to Base: Insert the bottom of the assembled pole into the lamp base and tighten securely.
- Prepare for Shade: Unscrew the socket ring from the lamp holder (bulb socket) at the top of the lamp arm.
- Install Lampshade: Place the assembled lampshade onto the lamp holder, ensuring it rests evenly. Screw the socket ring back onto the lamp holder to secure the lampshade in place.
- Install LED Bulb: Carefully screw the provided 9W LED E26 bulb into the lamp holder. Do not overtighten.
Image: Step-by-step assembly guide
Video: Official Ambimall installation guide for the floor lamp.
4. Operating Instructions
This lamp features a convenient foot pedal switch and an adjustable lampshade.
4.1. Power On/Off and Color Temperature Adjustment
The lamp is equipped with a foot pedal switch on the power cord. This switch controls both power and color temperature settings.
- To Turn On/Off: Press the foot pedal once to turn the lamp on. Press it again to cycle through color temperatures and eventually turn it off.
- To Change Color Temperature: Each press of the foot pedal will cycle through the three available color temperature settings:
- 3000K Warm White: Provides a soft, cozy light, ideal for relaxation or sleep.
- 4000K Natural White: Offers a balanced, neutral light, suitable for reading or working.
- 5000K Daylight White: Delivers a bright, crisp light, enhancing visibility for tasks or general room illumination.
Image: Three color temperature options (3000K, 4000K, 5000K)
Image: Foot pedal switch
4.2. Adjustable Lampshade Angle
The lampshade can be rotated to direct light as needed. This feature is useful for task lighting, such as reading or working.
- Gently rotate the lampshade to adjust the angle. It can rotate up to 270 degrees horizontally and 120 degrees vertically.
- Avoid forcing the lampshade beyond its natural range of motion to prevent damage.
Image: Adjustable lampshade angle
5. Maintenance
Proper maintenance ensures the longevity and optimal performance of your lamp.
- Cleaning: Disconnect power before cleaning. Wipe the lamp pole and base with a soft, dry cloth. For the fabric lampshade, use a lint roller or a soft brush to remove dust. Do not use liquid cleaners or abrasive materials.
- Bulb Replacement: Ensure the lamp is unplugged and the bulb has cooled before attempting to replace it. Unscrew the old bulb and screw in a new E26 base LED bulb, not exceeding 9W.
- Storage: If storing the lamp, disassemble it carefully and store components in their original packaging in a dry place.
6. Troubleshooting
If you encounter issues with your lamp, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power, loose bulb, faulty switch. | Check power outlet. Ensure plug is fully inserted. Tighten bulb. Press foot pedal firmly. |
| Light flickers or is dim. | Loose bulb, incorrect bulb wattage, bulb nearing end of life. | Tighten bulb. Ensure bulb is 9W LED E26. Replace bulb if necessary. |
| Lampshade is unstable or crooked. | Socket ring not tightened, lampshade not properly assembled. | Ensure socket ring is securely tightened. Re-assemble lampshade if necessary. |
| Pole sections are loose. | Sections not fully screwed together. | Carefully tighten all pole sections. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | RPT-QZB10101 |
| Brand | Ambimall |
| Product Dimensions | 11"D x 11"W x 61.8"H |
| Item Weight | 7.7 pounds |
| Material Type | Metal (pole, base), Linen (shade) |
| Finish Type | Matte |
| Shade Color | Beige |
| Bulb Base | E26 |
| Light Source Type | LED |
| Wattage | 9 watts (included bulb) |
| Voltage | 120 volts |
| Switch Type | Foot Pedal (Push Button) |
| Color Temperature | 3000K, 4000K, 5000K (adjustable) |
| Lampshade Adjustability | 270° horizontal, 120° vertical rotation |
| Indoor/Outdoor Usage | Indoor |
Image: Product dimensions
8. Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact Ambimall customer service directly. Keep your purchase receipt for any warranty claims.