1. Introduction
Thank you for choosing Hausfame Swivel Bar Stools. This manual provides essential information for the safe assembly, operation, and maintenance of your new stools. Please read it thoroughly before beginning assembly and keep it for future reference.
These stools feature a sturdy metal frame, vintage-inspired faux leather upholstery, comfortable foam filling, and a 360-degree swivel seat for enhanced mobility. They are designed for use in kitchen, bar, or recreation areas.
2. Safety Information
- Always assemble the stools on a soft, clean surface to prevent scratches.
- Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not stand on the stool. Use it only for seating.
- Do not exceed the maximum weight capacity of 265 lbs (120 kg).
- Keep small parts and packaging materials away from children and pets to prevent choking hazards.
- Floor protectors are included to prevent slipping and scratching. Ensure they are properly installed.
3. Package Contents
Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer service immediately.
- Stool Seats with Backrests (2)
- Stool Bases/Leg Assemblies (2)
- Hardware Pack (screws, bolts, Allen wrench)
- Assembly Instructions (this manual)
4. Setup and Assembly
Estimated assembly time for one stool is approximately 15 minutes. It is recommended to have two people for easier assembly.
Figure 4.1: Stool Dimensions and Estimated Assembly Time.
This image illustrates the key dimensions of the stool, including overall height, seat height, and base width. It also indicates an estimated installation time of 15 minutes per stool.
- Unpack Components: Carefully remove all parts from the packaging. Place them on a soft, flat surface to prevent damage.
- Attach Seat to Base: Align the pre-drilled holes on the bottom of the seat with the holes on the top of the stool base. Insert the provided screws and tighten them securely using the Allen wrench. Do not overtighten.
- Check Stability: Once assembled, gently rock the stool to ensure it is stable and all connections are firm. If there is any wobbling, re-check all screws and tighten as needed.
- Install Floor Protectors: Ensure the floor protectors on the bottom of the stool legs are securely in place to prevent scratching your floor and to provide stability.
Figure 4.2: Assembled Hausfame Swivel Bar Stools in a Kitchen Environment.
This image displays two fully assembled Hausfame swivel bar stools positioned at a kitchen counter, demonstrating their appearance and fit in a typical home setting.
5. Operating Instructions
- Seating: Sit centrally on the stool for optimal balance and comfort.
- Swivel Function: The stool features a 360-degree swivel seat. To rotate, simply apply gentle pressure with your body in the desired direction. Avoid forcing the swivel mechanism.
- Movement: When moving the stool, lift it rather than dragging it to prevent damage to the floor protectors and the floor surface.
6. Maintenance and Care
- Cleaning: To clean the faux leather upholstery and metal frame, wipe with a damp cloth. For stubborn stains, use a mild soap solution and then wipe dry immediately. Avoid harsh chemicals or abrasive cleaners.
- Regular Checks: Periodically inspect all screws and bolts to ensure they remain tight. Re-tighten as necessary to maintain stability and safety.
- Sunlight Exposure: Avoid prolonged exposure to direct sunlight to prevent fading or damage to the faux leather.
- Floor Protectors: Check the floor protectors regularly for wear and tear. Replace if damaged to continue protecting your floors.
Figure 6.1: High-Density Sponge Cushion Detail.
This image provides a close-up of the stool's seat cushion, highlighting the high-density sponge material which offers strong resilience and exceptional support.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stool wobbles after assembly. | Screws are not fully tightened or unevenly tightened. | Place the stool on a flat surface. Loosen all screws slightly, then press down on the seat to ensure all legs are evenly touching the floor. Re-tighten all screws firmly. |
| Difficulty swiveling. | Mechanism might be stiff or obstructed. | Ensure no objects are obstructing the swivel mechanism. Apply a small amount of silicone-based lubricant to the swivel bearing if necessary (avoid oil-based lubricants on upholstery). |
| Scratches on floor. | Floor protectors are missing or damaged. | Ensure all floor protectors are securely attached. Replace any worn or missing protectors. Avoid dragging the stool. |
8. Specifications
- Product Dimensions (Bar Stool): 20.55"D x 20"W x 38"H (Seat Height: 30")
- Product Dimensions (Counter Stool): 20.55"D x 20"W x 32.5"H (Seat Height: 24")
- Color: Grey
- Brand: Hausfame
- Manufacturer: Overstock
- Style: Vintage Industrial
- Furniture Finish: Metal
- Upholstery Material: Faux Leather
- Assembly Required: Yes
- Number of Pieces: 2 (per set)
- Maximum Weight Capacity: 265 lbs (120 kg)
- UPC: 645195463638
- ASIN: B0C4B9PZX5
9. Warranty and Support
Your Hausfame Swivel Bar Stools come with a 1-year limited warranty from the date of purchase, covering manufacturing defects. This warranty does not cover damage due to misuse, improper assembly, or normal wear and tear.
For any questions, concerns, or warranty claims, please contact our professional customer service team. Please have your purchase details and product ASIN (B0C4B9PZX5) ready when contacting support.
Contact Information: Refer to your purchase platform or original packaging for specific customer service contact details.
