Teenage Mutant Ninja Turtles 71094

Teenage Mutant Ninja Turtles Turtle Madness Skate Park Playset

Model: 71094

Introduction

Welcome to the world of the Teenage Mutant Ninja Turtles! This instruction manual provides essential information for the assembly, operation, and care of your Turtle Madness Skate Park Playset. This 18-piece set allows you to perform skate tricks with an exclusive Michelangelo switch kick skater, utilizing a vert ramp, rails, and a fire hydrant. It is designed for children aged 3 and up.

Safety Information

WARNING! Not suitable for children under 36 months. Small parts. Choking hazard.

Please ensure all components are securely assembled before play. Adult supervision is recommended during assembly and initial play to ensure safe usage.

What's in the Box

  • Turtle Madness Skatepark components (18 pieces)
  • Exclusive Michelangelo switch kick skater figure

Please check all contents against the packaging to ensure no pieces are missing.

Setup and Assembly

Follow these steps to assemble your Turtle Madness Skate Park Playset:

  1. Unpack Components: Carefully remove all pieces from the packaging. Lay them out on a clean, flat surface.
  2. Identify Main Structure: Locate the central green sewer-themed structure, which forms the core of the skate park.
  3. Attach Ramps: Connect the large vert ramp to one side of the central structure and the smaller orange ramp to the other side. Ensure they snap securely into place.
  4. Install Rails and Fire Hydrant: Attach the yellow rails to the top platform of the central structure. Position the fire hydrant and its water splash accessory near the curved ramp section.
  5. Prepare Michelangelo Skater: The exclusive Michelangelo figure comes with a switch kick skater. Ensure the ripcord mechanism is ready for use.
Components of the Turtle Madness Skate Park Playset laid out
Image: All components of the Turtle Madness Skate Park Playset, including ramps, rails, fire hydrant, and the Michelangelo figure on his skateboard.
Assembled Turtle Madness Skate Park Playset with Michelangelo figure
Image: The fully assembled Turtle Madness Skate Park Playset, showcasing the vert ramp, central sewer structure, and curved ramp with fire hydrant. The Michelangelo figure is positioned on the top platform.

Operating Instructions

Engage in exciting skate action with your playset:

  1. Using the Switch Kick Skater: Insert the ripcord into the Michelangelo skater. Pull the ripcord to activate the spinning action of the skater.
  2. Performing Tricks: Place the activated Michelangelo skater on the vert ramp, rails, or the fire hydrant to mimic various skate tricks. Experiment with different starting points and angles for varied results.
  3. Combining with Other Sets: This playset can be combined with other Teenage Mutant Ninja Turtles toy vehicles and sets to create an expanded play area. (Additional sets sold separately).
Side view of the Turtle Madness Skate Park Playset box showing features
Image: Side of the product box illustrating various play features like 'Drop In!', 'Grind!', and 'Spin!' with the Michelangelo figure.
Back of the Turtle Madness Skate Park Playset box showing play scenarios
Image: Back of the product box detailing how to insert the ripcord, perform a 'Rip!' action, and execute 'Drop In!', 'Spin!', and 'Grind!' tricks.

Maintenance

To ensure the longevity of your playset:

  • Clean the playset with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
  • Store the playset in a cool, dry place away from direct sunlight when not in use.
  • Regularly check for any loose or damaged parts. Discontinue use if any damage is found.

Troubleshooting

If the Michelangelo switch kick skater is not performing as expected:

  • Ensure the ripcord is fully inserted and pulled firmly.
  • Check for any obstructions in the skater's wheels or the ripcord mechanism.
  • Verify that the skater is placed on a smooth, flat surface or the designated playset ramps.

Specifications

FeatureDetail
Product Dimensions13 x 4 x 20 inches
Item Weight4.44 pounds
Item Model Number71094
Manufacturer Recommended Age36 months - 15 years
Release DateApril 18, 2023
ManufacturerFunrise, Inc.
Diagram showing dimensions of the assembled skate park playset
Image: A diagram illustrating the approximate dimensions of the assembled skate park playset: 14.25 inches (36.2 cm) high, 18.8 inches (47.8 cm) deep, and 28 inches (71.1 cm) wide. Note that dimensions may vary depending on the track arrangement.

Warranty and Support

For any questions regarding your Teenage Mutant Ninja Turtles Turtle Madness Skate Park Playset, please contact Funrise, Inc. customer support. Please retain your proof of purchase for any warranty claims.

© 2023 Teenage Mutant Ninja Turtles. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.