Introduction
This manual provides detailed instructions for the proper use and maintenance of your Denver Wireless Over-Ear Headphones, Model 5706751068232. Please read this manual thoroughly before using the product to ensure optimal performance and longevity. Keep this manual for future reference.
Product Overview
Figure 1: Denver Wireless Over-Ear Headphones. This image displays the overall design of the headphones, highlighting the earcups and adjustable headband, in a white finish.
The Denver Wireless Over-Ear Headphones (Model 5706751068232) are designed for comfortable audio listening. They feature a circum-aural form factor, meaning the earcups fully enclose the ears, and connect wirelessly to compatible devices. The headphones are lightweight and suitable for adult users.
Components Included:
- Denver Wireless Over-Ear Headphones (1 unit)
- Earpads (pre-installed)
- User Manual (this document)
Setup Instructions
1. Initial Charging
Before first use, ensure the headphones are fully charged. Connect the charging cable (not specified if included, assuming standard USB) to the charging port on the headphones and to a compatible USB power source. The charging indicator light will typically show red during charging and turn off or blue when fully charged.
2. Powering On/Off
- To Power On: Press and hold the Power button (location not specified, typical on earcup) for approximately 3-5 seconds until the indicator light flashes.
- To Power Off: Press and hold the Power button for approximately 3-5 seconds until the indicator light turns off.
3. Bluetooth Pairing
- Ensure the headphones are powered off.
- Press and hold the Power button for about 5-7 seconds until the indicator light flashes red and blue alternately, indicating pairing mode.
- On your compatible device (e.g., smartphone, tablet, laptop), enable Bluetooth and search for available devices.
- Select "Denver Headphones" or a similar name from the list of found devices.
- Once paired, the indicator light on the headphones will typically flash blue slowly or remain solid blue.
- If prompted for a password, enter "0000".
Operating Instructions
1. Audio Playback
- Play/Pause: Press the Multi-function button (often the Power button) once.
- Volume Up: Press the Volume + button.
- Volume Down: Press the Volume - button.
- Next Track: Press and hold the Volume + button (or a dedicated button, if present).
- Previous Track: Press and hold the Volume - button (or a dedicated button, if present).
2. Phone Calls
- Answer Call: Press the Multi-function button once.
- End Call: Press the Multi-function button once during a call.
- Reject Call: Press and hold the Multi-function button for approximately 2 seconds.
- Redial Last Number: Double-press the Multi-function button.
3. Wired Connection (if applicable)
Although primarily wireless, these headphones feature a 3.5mm Jack. To use a wired connection, plug a 3.5mm audio cable (not specified if included) into the headphone's audio jack and the other end into your audio source. The wireless function will typically be disabled when a wired connection is active.
Maintenance
1. Cleaning
- Wipe the headphones with a soft, dry, lint-free cloth.
- Do not use abrasive cleaners, alcohol, or chemical solvents.
- Avoid getting moisture into any openings. The headphones are not water-resistant.
2. Storage
- Store the headphones in a cool, dry place, away from direct sunlight and extreme temperatures.
- Avoid placing heavy objects on the headphones.
3. Battery Care
To prolong battery life, fully charge the headphones at least once every three months if not used regularly. Avoid completely draining the battery frequently.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Headphones do not power on. | Low battery. | Charge the headphones fully. |
| Cannot pair with device. | Headphones not in pairing mode; Bluetooth off on device; device too far. | Ensure headphones are in pairing mode (flashing red/blue). Turn on Bluetooth on your device. Move device closer to headphones (within 10 meters). |
| No sound or low volume. | Volume too low on headphones or device; not properly connected. | Increase volume on both headphones and connected device. Re-pair the headphones. Check wired connection if applicable. |
| Sound quality is poor. | Interference; device too far; low quality audio source. | Move away from sources of interference (e.g., Wi-Fi routers). Move device closer. Try a different audio source. |
Specifications
| Model Number | 5706751068232 |
| Brand | Denver |
| Connectivity Technology | Wireless |
| Headphone Form Factor | Circum-Auricular (Over-Ear) |
| Ear Placement | Supra-auriculaire (Over-Ear) |
| Noise Control | None |
| Headphone Jack | 3.5 mm Jack |
| Compatible Devices | Computer, Laptop, Tablet, Mobile Phone |
| Internal Material | Plastic |
| Product Features | Lightweight |
| Water Resistance Level | Not Waterproof |
| Battery | 1 Lithium-ion battery required |
| Age Range Description | Adult |
Warranty and Support
For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Denver Electronics website. Keep your proof of purchase for warranty claims.
If you encounter issues not covered in this manual, please contact Denver customer service for assistance.