1. Product Overview
This manual provides instructions for the LINNIW FSV001 HEPA Filter, designed to maintain optimal performance and air quality when used with compatible cordless stick vacuum cleaners.
Image 1.1: Four LINNIW FSV001 HEPA filters and a cleaning brush, as included in the package.
2. Compatibility
The LINNIW FSV001 HEPA Filters are compatible with the following cordless stick vacuum cleaner models:
- Fabuletta FSV001
- Fabuletta FSV101
- VacLife VL732
- Girnoor G160
- Girnoor G165
- Afoddon A300
- Lubluelu 202
- Oraimo OSV-102
- Besswin W26
- Nequare S181
Important Note:
There are different versions of FSV101 and FSV001 vacuum cleaners. Please verify the height and design of your existing filter to ensure proper fit. If your current filter has tabs, ensure the replacement filter matches this design. If you encounter compatibility issues, please contact customer support.
Image 2.1: Visual representation of compatible vacuum cleaner models.
Image 2.2: Comparison of filter designs, emphasizing the presence or absence of a tab for proper fit.
3. Installation
- Ensure the vacuum cleaner is turned off and unplugged (if applicable).
- Locate the filter compartment on your vacuum cleaner. Refer to your vacuum cleaner's instruction manual for specific details.
- Remove the old filter by twisting or pulling it out, depending on your vacuum model.
- Insert the new LINNIW FSV001 HEPA Filter into the compartment, ensuring it is seated correctly and securely.
- Close the filter compartment.
The filters are designed for easy replacement to ensure continuous optimal performance.
4. Operating Principles
The FSV001 HEPA filter utilizes an advanced filtration system to capture airborne particles. Its pleated media design increases the surface area, allowing for efficient particle capture while maintaining good airflow.
- High Efficiency: Effectively captures 99.97% of airborne particles as small as 0.3 microns.
- Particle Capture: Designed to trap dust, hair, pet fur, lint, pollen, smoke particles, and volatile organic compounds (VOCs).
Image 4.1: Illustration of the filter's ability to keep air fresh and clean by trapping various particles.
Image 4.2: Diagram illustrating the high-efficiency filtration system, including the HEPA filter.
5. Maintenance
5.1 Cleaning the Filter
To prolong the life of your filter and maintain optimal vacuum performance, regular cleaning is recommended. The LINNIW FSV001 HEPA filter is washable and reusable.
- Remove the filter from the vacuum cleaner.
- Gently tap the filter to dislodge loose dust and debris.
- Use the included cleaning brush to remove stubborn particles from the pleats.
- Rinse the filter under cool, running water until the water runs clear.
- Allow the filter to air dry completely for at least 24 hours before reinstallation. Do not use the filter if it is still damp, as this can damage the vacuum cleaner.
Image 5.1: Visual representation of the washable and reusable filter design.
Image 5.2: Hands washing the filter under running water.
5.2 Filter Replacement
It is recommended to change the filter every 3 months to ensure optimal filtration and vacuum performance. The package includes 4 filters for extended use.
6. Troubleshooting
- Filter Does Not Fit:
As noted in the compatibility section, some vacuum models (especially FSV101 and FSV001) have different filter versions. Please check if your original filter has tabs. If the purchased filter does not fit, contact customer support for assistance.
- Reduced Suction Power:
A clogged filter can significantly reduce your vacuum's suction power. Clean the filter as described in Section 5.1. If suction does not improve, replace the filter with a new one.
- Unusual Odors:
Odors can indicate a dirty filter. Clean or replace the filter. Ensure the filter is completely dry before reinstallation to prevent mold or mildew growth.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | LINNIW |
| Model | FSV001 HEPA Filter |
| Material Type | HEPA |
| Product Dimensions | Approximately 2.9 x 5.2 x 5.2 inches (7.4 x 13.2 x 13.2 cm) |
| Item Weight | 0.8 ounces (per filter) |
| Reusability | Reusable (Washable) |
| Included Components | 4 FSV001 Filters, 1 Cleaning Brush |
Image 7.1: Detailed product dimensions of the FSV001 HEPA filter.
Image 7.2: Key product details highlighting tight sealing, premium materials, and uniform layers.
8. Warranty and Support
LINNIW values customer service and satisfaction. If you encounter any problems with your FSV001 HEPA filters, please contact our customer support team. We are committed to providing satisfactory service to every customer.
For support, please refer to the contact information provided with your purchase or visit the official LINNIW store page on Amazon.
Filter made of FSC-Certified paper.
