Hicks Digital Thermometer DMT-102 Instruction Manual

1. Introduction

Thank you for choosing the Hicks Digital Thermometer DMT-102. This device is designed for accurate and rapid temperature measurement for both adults and children. It provides a safe, fast, and reliable method for oral, rectal, or underarm temperature readings. Please read this manual thoroughly before use to ensure proper operation and to maintain the device's accuracy and longevity.

2. Key Features

• Memory function for last reading recall.
• Integrated beeper for measurement completion.
• Suitable for use by both adults and children.
• Provides safe, fast, and accurate temperature readings.
• Versatile for oral, rectal, or underarm temperature measurement.
• Automatic shut-off feature to conserve battery life.

3. Package Contents

Upon opening the package, please ensure all items are present and in good condition:

• Hicks Digital Thermometer DMT-102
• Instruction Manual

4. Product Overview

Figure 1: The Hicks Digital Thermometer DMT-102 in its original retail packaging, showcasing the product and key features on the front.

Figure 2: The Hicks Digital Thermometer DMT-102, removed from its box and placed inside its clear protective storage case. The digital display and probe tip are visible.

Figure 3: The rear side of the Hicks Digital Thermometer DMT-102 retail packaging. This view displays important product information, including the model number, manufacturer details, and the product barcode (UPC: 8904213901838).

5. Setup

5.1 Battery Installation/Replacement

The Hicks Digital Thermometer DMT-102 is powered by a button cell battery. If the display shows a low battery indicator or does not turn on, the battery may need replacement.

1. Locate the battery compartment cover, typically at the end opposite the probe.
2. Carefully slide or unscrew the cover to open the compartment.
3. Remove the old battery (if present) and insert a new button cell battery (e.g., LR41 or SR41) with the positive (+) side facing up.
4. Replace the battery compartment cover securely.

5.2 Initial Power On

Press the power button to turn on the thermometer. A short beep will sound, and the display will briefly show all segments, followed by the last measured temperature (if any), and then 'Lo' with a flashing '°C' or '°F' indicating it is ready for measurement.

6. Operating Instructions

6.1 Taking a Temperature Measurement

Ensure the thermometer is clean before use. Press the power button to turn it on.

• Oral Use: Place the probe tip under the tongue as close to the heat pocket as possible. Keep the mouth closed during measurement.
• Rectal Use: Lubricate the probe tip with a water-soluble jelly. Gently insert the tip no more than 1/2 inch into the rectum. This method is generally recommended for infants and young children.
• Underarm (Axillary) Use: Place the probe tip in the center of the armpit, ensuring good skin contact. Hold the arm firmly against the body. This method is less accurate than oral or rectal measurements.

Hold the thermometer in place until the beeper sounds, indicating the measurement is complete and stable. The temperature reading will then be displayed.

6.2 Reading the Display

The temperature will be shown on the digital display. The unit of measurement (°C or °F) will be indicated. The beeper will sound when the peak temperature is reached.

6.3 Automatic Shut-off

The thermometer will automatically shut off after approximately 10 minutes of inactivity to conserve battery life. You can also manually turn it off by pressing the power button.

7. Memory Function

The Hicks Digital Thermometer DMT-102 stores the last measured temperature. To recall the last reading:

1. With the thermometer off, press and hold the power button for approximately 2 seconds.
2. The display will show the last recorded temperature before proceeding to the 'Lo' ready state.

8. Care and Maintenance

8.1 Cleaning and Disinfection

After each use, especially for oral or rectal measurements, clean the thermometer probe. Wipe the probe tip with a soft cloth moistened with rubbing alcohol (70% isopropyl alcohol) or an antiseptic solution. Do not immerse the entire thermometer in water or any cleaning solution. The device is designed for 'Wipe Clean' care.

8.2 Storage

Store the thermometer in its protective case when not in use. Keep it in a cool, dry place, away from direct sunlight, extreme temperatures, and out of reach of children.

9. Troubleshooting

10. Specifications

• Model: DMT-102
• Type: Digital Thermometer
• Special Feature: High Accuracy
• Age Range: Adult (suitable for children with proper use)
• Outer Material: Glass (probe tip)
• Power Source: Battery Powered
• Item Length: Approximately 14.5 Centimetres
• Reusability: Reusable device
• Memory: 1 (last reading)
• Automatic Shut-off: Yes
• Product Care: Wipe Clean
• Manufacturer: Hicks Thermometer (I) Ltd.
• Date First Available: 1 August 2023

11. Safety Information

• Do not boil the thermometer or immerse it in hot water.
• Do not drop the thermometer or expose it to severe shock.
• Do not attempt to disassemble the thermometer.
• Keep batteries out of reach of children. Swallowing batteries can be fatal.
• Consult a physician if you have concerns about your temperature reading.
• This device is for personal use and should not replace professional medical advice.

12. Warranty and Support

For warranty information, technical support, or any inquiries regarding your Hicks Digital Thermometer DMT-102, please contact the manufacturer directly.

Manufacturer: Hicks Thermometer (I) Ltd.
Importer: Hicks Thermometer (I) Ltd. A-12,13 & C-26, Industrial Estate, Aligarh-202001

You may also visit the official HICKS Store on Amazon for more information and product updates.