BONAD Adjustable Swivel Bar Stool (65-80cm) Instruction Manual

1. Introduction

Thank you for choosing the BONAD Adjustable Swivel Bar Stool. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stool. Please read these instructions carefully before use and retain them for future reference.

2. Product Overview

The BONAD Adjustable Swivel Bar Stool is designed for comfort and versatility, suitable for various settings including home bars, kitchen counters, and office spaces. It features an adjustable height mechanism, a 360-degree swivel function, and a comfortable backrest.

Key Features:

• Adjustable Height: Mechanical lifting mechanism allows height adjustment from 65cm to 80cm.
• 360-Degree Swivel: Provides full rotation for ease of movement and interaction.
• Comfortable Backrest: Designed to effectively support the waist and enhance sitting comfort.
• Velvet Seat: Upholstered with soft velvet and filled with high-elastic sponge for a comfortable sitting experience.
• Stable Metal Base: Features an increased chassis design for stability and high load capacity.
• Floor Protection: Equipped with rubber feet to prevent scratches and reduce noise.

Components:

Please ensure all components are present before assembly. While specific component images are not provided, typical bar stool components include:

• Seat with Backrest
• Gas Lift Cylinder
• Footrest Ring
• Base Plate
• Assembly Hardware (screws, washers, Allen key)

Image: Two BONAD bar stools, showcasing the design and color options. The stools feature a plush, tufted backrest and a round seat, supported by a golden metal frame and base.

3. Setup and Assembly

Assembly typically requires minimal tools and can be completed by one person. Follow these general steps:

1. Unpack Components: Carefully remove all parts from the packaging and place them on a clean, soft surface to prevent scratches.
2. Attach Gas Lift to Base: Insert the wider end of the gas lift cylinder into the center hole of the base plate. Ensure it is seated firmly.
3. Attach Footrest Ring: Slide the footrest ring over the gas lift cylinder, if applicable to your model, and secure it according to the specific instructions provided with your product.
4. Attach Seat to Gas Lift: Align the mounting plate under the seat with the top of the gas lift cylinder. Press down firmly until the seat is securely attached. Some models may require screwing the seat to a separate mechanism first, then attaching the mechanism to the gas lift.
5. Verify Stability: Once assembled, gently test the stool's stability before full use.

Image: A white BONAD bar stool illustrating its adjustable height feature, ranging from 65cm to 80cm, with a clear indication of the liftable mechanism.

4. Operating Instructions

Height Adjustment:

To adjust the stool's height, locate the lever typically found under the seat. While seated, pull the lever upwards to lower the stool. To raise the stool, stand up and pull the lever upwards; the gas lift will extend automatically. Release the lever at your desired height.

Swivel Function:

The stool is designed with a 360-degree swivel mechanism, allowing you to rotate freely without moving the base. Simply turn the seat in the desired direction.

Image: A green BONAD bar stool demonstrating its 360-degree rotation capability, highlighted by red arrows around the seat base.

5. Maintenance and Care

Proper care will extend the life and appearance of your bar stool.

• Cleaning the Velvet Seat: For light dirt, gently wipe the velvet surface with a clean, soft, damp cloth. For spills, blot immediately with a clean, dry cloth. Avoid harsh chemicals or abrasive cleaners.
• Cleaning the Metal Base: Wipe the metal base and frame with a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used, followed by immediate drying to prevent water spots or corrosion.
• Regular Inspection: Periodically check all screws and connections to ensure they are tight. Retighten if necessary to maintain stability.
• Avoid Overloading: Do not exceed the maximum weight capacity of the stool.
• Protect from Elements: Avoid prolonged exposure to direct sunlight or extreme humidity, which can affect the fabric and metal finish.

Image: A close-up of the green BONAD bar stool's seat, highlighting its construction with high elastic sponge filling for comfort.

Image: A detailed view of the BONAD bar stool's sturdy gold metal base, emphasizing its robust construction.

6. Troubleshooting

If you encounter any issues with your bar stool, please refer to the following common problems and solutions:

7. Specifications

8. Warranty and Support

For warranty information or if you require further assistance with your BONAD Adjustable Swivel Bar Stool, please contact BONAD customer support through your retailer or the official BONAD website. Please have your purchase details and model information ready when contacting support.