LG SR-G3WU55

LG SR-G3WU55 OLED G3 Series Stand and Back Cover Instruction Manual

Model: SR-G3WU55

1. Introduction

This manual provides detailed instructions for the proper assembly, installation, and care of your LG SR-G3WU55 Stand and Back Cover. This accessory is designed to provide stable support for compatible LG OLED G2 and G3 Series televisions. Please read this manual thoroughly before beginning installation to ensure correct setup and safe operation.

2. Safety Information

Please observe the following safety precautions to prevent injury or damage to your product and television:

  • Always handle the stand and television with care. It is recommended that two or more people lift and move the television.
  • Ensure all screws are securely tightened during assembly. Do not overtighten, as this may strip threads or damage components.
  • Place the assembled television and stand on a stable, level surface that can support the combined weight.
  • Keep small parts and packaging materials out of reach of children to prevent choking hazards.
  • Do not attempt to modify the stand or use it for any purpose other than its intended use with compatible LG OLED televisions.

3. Compatibility

The LG SR-G3WU55 Stand and Back Cover is compatible with the following LG OLED TV models:

  • 2023 LG OLED G3 Series (55-inch models)
  • 2022 LG OLED G2 Series (55-inch models)

Ensure your television model is listed above before proceeding with installation.

4. Package Contents

Verify that all components are present before beginning assembly. The package should contain:

  • Stand Base (1x)
  • Stand Support Column (1x)
  • Back Cover (1x)
  • Mounting Screws (various sizes, quantity as per TV model requirements)
  • Instruction Manual (this document)

Note: Specific screw types and quantities may vary slightly. Refer to the diagram in your TV's manual for exact screw requirements.

5. Setup and Installation

Follow these steps carefully to assemble and install the stand onto your compatible LG OLED TV.

Step 1: Prepare the Stand Components

Unpack all components and lay them out on a soft, clean surface to prevent scratches.

Top-down view of the LG SR-G3WU55 stand base, showing the flat, brushed metal surface and the black plastic support structure.

Image 1: Top view of the stand base. This image displays the brushed metal finish of the stand's front and the integrated black plastic support structure.

Step 2: Attach the Stand Support Column to the Base

Align the stand support column with the designated slots on the stand base. Secure it using the provided screws. Ensure a firm connection.

Side profile of the assembled LG SR-G3WU55 stand, showing the slight backward tilt of the TV mounting plate relative to the base.

Image 2: Side view of the assembled stand. This view highlights the ergonomic tilt of the stand, designed to position the television at a slight angle.

Step 3: Prepare the Television

Carefully place your LG OLED TV face-down on a soft, flat surface. Ensure the TV is powered off and disconnected from all cables.

Step 4: Attach the Stand Assembly to the Television

Locate the mounting holes on the back of your television. Align the stand support column with these holes. Secure the stand to the TV using the appropriate mounting screws. Refer to your TV's specific manual for the correct screw types and torque specifications.

Bottom view of the LG SR-G3WU55 stand, showing the grid-like structure and screw holes for attachment to the television.

Image 3: Bottom view of the stand's mounting plate. This image shows the structured underside with multiple screw points for secure attachment to the television.

Angled rear view of the LG SR-G3WU55 stand, illustrating the robust support structure and the connection points for the TV.

Image 4: Angled rear view of the stand. This perspective provides a clearer view of the stand's structural integrity and how it connects to the television's rear panel.

Step 5: Install the Back Cover

Once the stand is securely attached, position the back cover over the rear of the stand and TV, snapping it into place or securing it with any designated screws. This cover helps conceal cables and provides a clean aesthetic.

Rear view of the LG SR-G3WU55 stand's top section, showing the smooth black finish and potential cable management openings.

Image 5: Rear view of the stand's upper section. This image shows the design of the back cover area, which helps in cable management and provides a finished look.

Step 6: Position the Television

With the stand fully assembled and attached, carefully lift the television (with assistance) and place it on your desired stable surface. Ensure the TV is level and stable before connecting power or other devices.

6. Operating Guidelines

Once installed, the stand requires no specific "operation." However, observe the following guidelines for optimal use:

  • Stability: Always place the television and stand on a flat, stable, and level surface. Avoid placing it on uneven or wobbly furniture.
  • Ventilation: Ensure adequate space around the television for proper ventilation, as specified in your TV's user manual.
  • Cable Management: Utilize the integrated back cover and any cable routing features of the stand to organize and conceal cables, preventing tripping hazards and maintaining a tidy appearance.
  • Movement: If you need to move the television, always lift it with at least two people, supporting both the TV and the stand base. Do not drag the TV across surfaces.

7. Maintenance

To maintain the appearance and functionality of your LG SR-G3WU55 Stand:

  • Cleaning: Wipe the stand surfaces with a soft, dry cloth. For stubborn marks, a slightly damp cloth with mild soap can be used, followed by drying with a clean, dry cloth. Avoid abrasive cleaners, solvents, or chemical sprays.
  • Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary, but do not overtighten.
  • Avoid Liquids: Do not spill liquids directly onto the stand or allow them to seep into any openings.

8. Troubleshooting

If you encounter issues with your stand, refer to the following common solutions:

  • Stand is Wobbly:
    • Ensure the television is placed on a completely flat and level surface.
    • Check that all assembly screws are securely tightened.
    • Verify that the stand is correctly attached to the television according to the installation steps.
  • TV Does Not Fit the Stand:
    • Confirm your television model is listed under the "Compatibility" section (Section 3).
    • Double-check the orientation of the stand components during assembly.
  • Missing Parts:
    • Review the "Package Contents" section (Section 4). If parts are missing, contact LG customer support.

9. Specifications

Model NumberSR-G3WU55
Product Dimensions (L x W x H)17 x 8.86 x 9.65 inches (43.18 x 22.50 x 24.51 cm)
Item Weight12.8 pounds (5.8 kg)
ManufacturerLG
Compatible TV SeriesLG OLED G2 Series (55-inch), LG OLED G3 Series (55-inch)

10. Warranty and Support

For warranty information, please refer to the documentation included with your LG television or visit the official LG website. For technical support or inquiries regarding the SR-G3WU55 stand, please contact LG Customer Service:

  • LG Official Website: www.lg.com
  • Customer Support: Refer to the support section on the LG website for regional contact information (phone, chat, email).

© 2023 LG Electronics. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.