1. Introduction
The CSI AutoSlick Detail Spray 62-605-Q is a high-performance, SiO2-infused ceramic spray designed for automotive surface protection. It creates a durable, protective barrier against contaminants and UV degradation, while enhancing gloss and adding hydrophobic properties. This product is suitable for use on exterior paint, glass, plastic trim, metal, and interior materials such as vinyl, leather, and rubber, providing uniform protection without streaking or residue.
2. Product Features
- Ceramic Spray: Formulated with SiO2 for advanced protection.
- Super Slick Finish: Provides a smooth, low-friction surface.
- Long-Lasting Protection: Designed to maintain its protective qualities for an extended period.
- Versatile Application: Can be applied in direct sunlight or shaded areas.
- Multi-Surface Use: Safe for exterior paint, glass, plastic trim, metal, vinyl, leather, and rubber.
3. Safety Information
Always read the product label and Safety Data Sheet (SDS) before use.
- Keep out of reach of children and pets.
- Avoid contact with eyes and prolonged skin contact. In case of contact, rinse thoroughly with water.
- Use in a well-ventilated area.
- Do not ingest. If swallowed, seek medical attention immediately.
- Store in a cool, dry place away from direct sunlight and extreme temperatures.
4. Setup and Preparation
Before applying CSI AutoSlick Detail Spray, ensure the surface is clean and dry.
- Wash Vehicle: Thoroughly wash the vehicle to remove dirt, grime, and contaminants.
- Dry Surface: Dry the vehicle completely using a clean microfiber towel.
- Inspect Surface: Ensure the surface is free from any loose debris or heavy contamination. For best results, perform any necessary paint correction before application.
- Shake Bottle: Shake the AutoSlick bottle well before each use to ensure proper mixing of ingredients.
This image shows the CSI AutoSlick Detail Spray bottle, a blue applicator pad, and a gray microfiber towel, illustrating the typical items used for application.
5. Operating Instructions (Application)
CSI AutoSlick Detail Spray can be applied in sun or shade. Work on one section at a time.
- Spray Application: Lightly mist AutoSlick directly onto a small section of the vehicle's surface (e.g., one panel). A few sprays are usually sufficient per section.
- Spread Evenly: Using a clean, soft microfiber towel or applicator pad, gently spread the product evenly across the sprayed area.
- Buff to Shine: Immediately after spreading, use a separate clean, dry microfiber towel to buff the area to a high shine. Ensure no streaks or residue remain.
- Repeat: Continue this process, section by section, until the entire vehicle is treated.
This image displays the AutoSlick bottle with text emphasizing its ceramic spray properties, water-based formula, inclusion of applicator, and long-lasting effects, suggesting ease of use and durability.
The AutoSlick bottle, an applicator pad, and a microfiber towel are placed on the hood of a red classic car, demonstrating the product's application context.
6. Maintenance
To maintain the protective properties and slick finish provided by AutoSlick:
- Regularly wash your vehicle with a pH-neutral car shampoo.
- Reapply AutoSlick Detail Spray as needed, typically every few months, or when water beading/sheeting performance diminishes.
- Use clean, soft microfiber towels for all washing and drying to prevent scratching the treated surface.
7. Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Streaking or hazing after application. | Too much product applied, or not buffed off quickly/thoroughly enough. | Use less product per section. Ensure immediate and thorough buffing with a clean, dry microfiber towel. If streaking occurs, re-mist lightly and buff again. |
| Product not lasting as expected. | Surface not properly cleaned before application, or harsh chemicals used for washing. | Ensure surface is thoroughly clean and decontaminated before application. Use pH-neutral car wash soaps for maintenance. |
| Sprayer not working. | Sprayer nozzle clogged or defective. | Check if the nozzle is clogged and clear it. If defective, contact customer support for a replacement sprayer. |
8. Specifications
| Attribute | Detail |
|---|---|
| Brand | CSI |
| Model Number | 62-605-Q |
| Item Form | Liquid |
| Specific Uses | Painted Surfaces |
| Recommended Uses | For Paint Protection |
| Number of Items | 1 |
| Package Dimensions | 10 x 5 x 2 inches |
| Item Weight | 2 Pounds |
| Manufacturer | CSI |
9. Warranty and Support
For specific warranty information or product support, please refer to the official CSI website or contact CSI customer service directly. Contact details are typically available on the product packaging or the manufacturer's website.
Note: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This disclaimer is provided as per product information, though it is generally not applicable to automotive detailing products.