LBTbate 20R

LBTbate 20R 440W Beam Light Bulb Instruction Manual

Model: 20R

1. Introduction

This manual provides essential information for the safe and effective use of your LBTbate 20R 440W Beam Light Bulb. Designed for professional stage, disco, and event lighting, this high-performance bulb delivers exceptional brightness and vibrant color effects. Please read this manual thoroughly before installation, operation, or maintenance to ensure optimal performance and safety.

2. Safety Information

Always adhere to the following safety precautions to prevent injury or damage to the product:

  • Electrical Safety: Always disconnect power to the lighting fixture before installing, removing, or performing any maintenance on the bulb.
  • High Temperature: The bulb operates at high temperatures. Do not touch the bulb immediately after use. Allow sufficient time for it to cool down before handling.
  • Proper Handling: Handle the bulb carefully by its base or housing. Avoid touching the glass surface directly, as oils from your skin can reduce bulb life.
  • Ventilation: Ensure the lighting fixture has adequate ventilation to dissipate heat generated by the bulb. Overheating can lead to premature bulb failure.
  • Compatibility: Use this bulb only with lighting fixtures designed for 20R 440W mercury vapor lamps. Incompatible fixtures may cause damage or safety hazards.
  • Disposal: Dispose of old bulbs according to local environmental regulations, as they may contain mercury.

3. Product Overview

The LBTbate 20R 440W Beam Light Bulb is engineered for high-intensity stage and event lighting, offering superior brightness and color stability.

LBTbate 20R 440W Beam Light Bulb

A close-up view of the LBTbate 20R 440W Beam Light Bulb, showcasing its reflective housing and internal components.

LBTbate 440W Beam Light in a stage setting with key features highlighted

This image illustrates the LBTbate 440W Beam Light bulb installed in a stage lighting fixture, projecting powerful beams of light onto a crowd. Key features such as high fluency, high-quality wick, high color and long range, clear brightness, and 2000+ hours life are noted.

Various light effects produced by the LBTbate 440W Beam Stage Light Bulb

A collage demonstrating the diverse lighting effects achievable with the LBTbate 440W Beam Stage Light Bulb, including patterned projections, vibrant color changes, and sharp beam outputs.

4. Setup and Installation

Follow these steps to properly install the LBTbate 20R 440W Beam Light Bulb:

  1. Power Off: Ensure the lighting fixture is completely powered off and disconnected from the main power supply.
  2. Cool Down: Allow the fixture and any existing bulb to cool down completely before handling.
  3. Access Bulb Compartment: Open the bulb access compartment of your lighting fixture according to the fixture's manufacturer instructions.
  4. Remove Old Bulb (if applicable): Carefully remove the old bulb, if present, following the fixture's guidelines. Dispose of it properly.
  5. Install New Bulb: Gently insert the LBTbate 20R 440W Beam Light Bulb into the fixture's socket. Ensure it is seated correctly and securely. Do not force the bulb into place.
  6. Secure Compartment: Close and secure the bulb access compartment.
  7. Restore Power: Reconnect the lighting fixture to the power supply.

5. Operating Instructions

The LBTbate 20R 440W Beam Light Bulb is designed to work seamlessly with compatible stage lighting fixtures. Its operation is primarily controlled by the fixture itself.

  • Power On: Once installed, power on your lighting fixture. The bulb should illuminate.
  • Fixture Control: Use your lighting fixture's control interface (e.g., DMX controller, built-in panel, or associated app) to manage the light's functions.
  • Color and Effects: This bulb supports a pure color plate and rainbow effects, allowing for vibrant and dynamic lighting displays. Adjust color, brightness, and beam patterns via your fixture's controls.
  • Warm-up Time: Mercury vapor lamps may require a short warm-up period to reach full brightness and stable color output.

6. Maintenance

Proper maintenance ensures the longevity and optimal performance of your LBTbate 20R 440W Beam Light Bulb.

  • Cleaning: Periodically, and only when the bulb is cool and power is disconnected, gently wipe the bulb's glass surface and the fixture's reflector with a soft, dry, lint-free cloth. Avoid abrasive cleaners or excessive pressure.
  • Inspection: Regularly inspect the bulb for any signs of damage, discoloration, or loose connections.
  • Replacement: The bulb has an average life of 2000 hours. Replace the bulb when its brightness significantly diminishes, it flickers, or it ceases to function.
  • Ventilation Check: Ensure that the cooling fans and vents of your lighting fixture are clear of dust and debris to maintain proper heat dissipation.

7. Troubleshooting

If you encounter issues with your LBTbate 20R 440W Beam Light Bulb, refer to the following common problems and solutions:

  • Bulb Does Not Light Up:
    • Check if the lighting fixture is properly connected to a power source.
    • Ensure the bulb is correctly seated in its socket.
    • Verify that the fixture's power switch is on.
    • Test the fixture with another known working bulb, if available, to rule out a fixture issue.
  • Light is Dim or Flickering:
    • Check for loose connections within the fixture or power supply.
    • Ensure the fixture is receiving the correct voltage (80V AC).
    • The bulb may be nearing the end of its operational life. Consider replacement.
  • Unusual Noise or Smell:
    • Immediately disconnect power to the fixture.
    • Inspect the bulb and fixture for any visible damage or signs of overheating.
    • Do not operate the fixture if damage is suspected. Contact customer support.

8. Specifications

FeatureSpecification
BrandLBTbate
Model Name20R 440w Beam Bulb
Light TypeMercury Vapor
Wattage440 watts
Voltage80 Volts (AC)
Brightness21000 Lumen
Color Temperature8000 Kelvin
Average Life2000 Hours
Bulb BaseE26
Color Rendering Index (CRI)80.00
MaterialPlastic
Indoor/Outdoor UsageIndoor
Package Dimensions4 x 4 x 3 inches
Item Weight6.4 ounces

9. Warranty Information

The LBTbate 20R 440W Beam Light Bulb comes with a 180-day warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product meets its specified performance standards under normal use. Please retain your proof of purchase for warranty claims.

10. Customer Support

For further assistance, technical support, or warranty inquiries, please contact LBTbate customer service. You can find more information and contact details on the official LBTbate store page:

Visit the LBTbate Store

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.