1. Product Overview
The BISSELL SpotClean Auto Pro Select 3730N is a powerful spot cleaner designed for deep cleaning of soft surfaces such as textiles, sofas, beds, car interiors, carpets, and rugs. It features a dual-tank system that keeps clean water separate from dirty water, ensuring effective cleaning results.
2. Setup and Assembly
Before first use, ensure all components are present and undamaged. Refer to the packaging for a complete list of contents.
- Unpack the Unit: Carefully remove the SpotClean Auto Pro Select from its packaging.
- Attach Hose and Tools: Connect the flexible hose to the main unit. Attach the desired cleaning tool (e.g., the large stain tool or crevice tool) to the end of the hose.
- Fill the Clean Water Tank:
- Remove the clean water tank from the unit.
- Unscrew the cap and fill the tank with warm tap water (up to 60°C/140°F) and the recommended BISSELL cleaning formula. Do not use boiling water.
- Securely replace the cap and reinsert the tank into the unit.
- Position the Dirty Water Tank: Ensure the dirty water collection tank is correctly seated in its designated slot.
3. Operating Instructions
Follow these steps for effective spot cleaning:
- Pre-treat (Optional): For tough stains, pre-treat the area with a suitable cleaning solution according to the solution's instructions.
- Plug In: Plug the power cord into a grounded electrical outlet.
- Power On: Turn on the unit using the power switch.
- Clean the Area:
- Hold the cleaning tool firmly against the soiled surface.
- Press the spray trigger to dispense cleaning solution while pulling the tool slowly over the stain.
- Release the spray trigger and pull the tool slowly over the same area to suction up the dirty solution. Repeat until the area is clean and no more dirty water is being extracted.
- For best results, make several dry passes to remove as much moisture as possible.
4. Maintenance and Care
Regular maintenance ensures optimal performance and longevity of your SpotClean Auto Pro Select.
- Empty and Rinse Dirty Water Tank: After each use, remove the dirty water tank, empty its contents, and rinse thoroughly with clean water.
- Rinse Clean Water Tank: If any solution remains, empty and rinse the clean water tank.
- Clean Tools and Hose: Rinse the cleaning tools under running water. For the hose, you can suction clean water through it to flush out any residue.
- Wipe Down Unit: Wipe the exterior of the unit with a soft, damp cloth.
- Store Properly: Store the unit in a dry, protected area. Ensure the hose and tools are neatly stored on the unit.
5. Troubleshooting
If you encounter issues with your SpotClean Auto Pro Select, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No spray from tool | Clean water tank empty or not seated correctly; pump not primed. | Refill clean water tank; ensure tank is securely in place; hold trigger for 30 seconds to prime pump. |
| Poor suction | Dirty water tank full or not seated correctly; hose/tool clogged; tank lid not sealed. | Empty dirty water tank; ensure tank is securely in place; check hose and tool for blockages; ensure tank lid is properly closed. |
| Unit not turning on | Not plugged in; power outlet issue; unit malfunction. | Check power cord connection; test outlet with another device; contact customer support if problem persists. |
6. Specifications
| Feature | Detail |
|---|---|
| Brand | Bissell |
| Model Number | 3730N |
| Model Name | SpotClean Auto Pro Select |
| Color | [Multiple] |
| Capacity (Clean Water) | 2.8 Litres |
| Power Source | Corded Electric |
| Item Weight | 7.76 Kilograms |
| UPC | 011120272536 |
| International Article Code | 00011120272536 |
7. Warranty and Support
For warranty information, product registration, or further assistance, please visit the official BISSELL website or contact their customer support. Keep your purchase receipt as proof of purchase.
Online Support: www.bissell.com