Introduction
This manual provides essential information for the safe and effective operation, setup, maintenance, and troubleshooting of your Electric Wall Breaker Hammer. This professional-grade tool is designed for demanding demolition jobs, offering powerful performance for breaking concrete and tough surfaces. Please read this manual thoroughly before initial use and keep it for future reference.
This image displays the Electric Wall Breaker Hammer in action, demonstrating its capability to break concrete. The tool is red and black, featuring a hex shank bit. A person in work attire is visible in the background, giving a thumbs-up gesture.
Safety Instructions
Always prioritize safety when operating power tools. Failure to follow safety guidelines can result in serious injury or property damage.
- Wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and heavy-duty gloves.
- Ensure the work area is clear of obstructions and well-lit.
- Verify the power source matches the tool's requirements (120 volts, 15 Amps, 20 amp circuit).
- Keep bystanders and pets away from the work area.
- Do not operate the tool in wet conditions or in the presence of flammable liquids or gases.
- Always unplug the tool before changing accessories, performing maintenance, or when not in use.
- Maintain a firm grip on the tool and be aware of its powerful impact.
- Avoid overreaching and maintain proper balance at all times.
Setup
Before operating the Electric Wall Breaker Hammer, ensure proper setup for safe and efficient use.
- Unpacking: Carefully remove the hammer and all included accessories from the carrying case. Verify that all components are present: the hammer unit, 2 chisels, wrench, chisel grease, and replacement brushes.
- Attaching the Side Handle: The hammer features an adjustable 360° swiveling side handle. Attach it securely to the tool body in a position that provides maximum comfort and control for your specific application. Ensure it is tightened firmly to prevent rotation during operation.
- Installing the Chisel Bit:
- Ensure the tool is unplugged from the power source.
- The heavy-duty bit retention system accepts standard 1-1/8 in. hex steel bits.
- Insert the desired chisel bit into the chuck until it locks securely into place. Pull on the bit to confirm it is properly seated.
- Power Connection: Connect the hammer's power cord to a compatible 120 volt AC, 20 amp circuit outlet. Ensure the circuit can handle the tool's 15 Amp draw.
Operating Instructions
Follow these steps for effective and safe operation of your Electric Wall Breaker Hammer.
- Starting the Tool: Once the bit is installed and the tool is plugged in, firmly grasp both the main handle and the side handle. Press the trigger to start the hammer. For continuous operation, engage the trigger lock for convenience.
- Demolition Technique:
- Position the chisel bit against the material to be broken.
- Apply steady, firm pressure. The hammer delivers an impact rate of 1300 BPM with 34 ft. lbs. of impact energy, designed for quick demolition.
- Allow the tool to do the work; excessive force is not necessary and can lead to fatigue or damage.
- Utilize the industry-leading anti-vibration control and shock-absorbent anti-vibration handle to minimize strain and fatigue during extended use.
- Stopping the Tool: Release the trigger to stop the hammer. If the trigger lock was engaged, disengage it first. Always unplug the tool from the power source after use.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your Electric Wall Breaker Hammer.
- Cleaning: After each use, clean the tool thoroughly. Remove any dust, debris, or concrete residue from the tool body, ventilation slots, and chuck area. Use a dry cloth or soft brush. Do not use solvents or abrasive cleaners.
- Chisel Bit Lubrication: Apply chisel grease (included) to the shank of the chisel bits before insertion to reduce wear and improve performance.
- Carbon Brushes: The tool features auto-stop carbon brushes and ball bearing construction for longer tool life. When the carbon brushes wear down, the tool will automatically stop to prevent motor damage. Replace worn brushes with the included replacement brushes or genuine manufacturer parts. Refer to the diagram in the packaging for brush replacement instructions.
- Storage: Store the hammer and its accessories in the provided carrying case in a dry, secure location, away from direct sunlight and extreme temperatures.
- Inspection: Periodically inspect the power cord for any signs of damage. Check all screws and fasteners to ensure they are tight. If any damage is found, do not use the tool and have it repaired by a qualified service technician.
Troubleshooting
This section addresses common issues you might encounter with your Electric Wall Breaker Hammer. For problems not listed here, contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Tool does not start. | No power supply; Worn carbon brushes; Faulty power cord/switch. | Check power outlet and circuit breaker. Replace carbon brushes. Inspect power cord and switch for damage; seek professional repair if damaged. |
| Reduced impact force. | Worn chisel bit; Insufficient lubrication; Internal wear. | Replace worn chisel bit. Apply chisel grease. If problem persists, professional service may be required. |
| Excessive vibration. | Loose components; Damaged internal parts. | Ensure side handle is securely tightened. If vibration is unusual or severe, discontinue use and seek professional inspection. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Generic |
| Model Number | 1632E-B |
| Power Source | Corded Electric 120 volt AC 20 amp circuit |
| Voltage | 120 Volts |
| Amperage | 15 Amps |
| Maximum Chuck Size | 1.13 Inches (1-1/8 in. hex steel) |
| Color | Red |
| Included Components | 2 chisels, wrench, chisel grease, replacement brushes, carrying case |
| Special Feature | Anti-vibration control |
| Product Dimensions (L x W x H) | 12"L x 9"W x 23.5"H |
| Speed (Impact Rate) | 1300 BPM (Blows Per Minute) |
| Item Weight | 35 Pounds |
| Maximum Power | 1800 Watts |
| Item Torque (Impact Energy) | 34 Foot Pounds |
| Drill Type | Basic Drill (Demolition Hammer) |
| UPC | 792363642774 |
| Manufacturer | HFT |
| Country of Origin | China |
| Usage | Concrete demolition, wall demolition, General construction demolition |
Warranty and Support
Warranty Description: The manufacturer guarantees this product to be free from defects in materials and workmanship for 90 days from the date of purchase. Limitations apply. Please retain your proof of purchase for warranty claims.
Customer Support: For technical assistance, parts, or warranty inquiries, please contact the seller or manufacturer. Refer to your purchase documentation for specific contact information.
For general inquiries, you may also refer to the product page on Amazon: Product Link
