1. Introduction
Thank you for choosing the Oxford Baby Bennett 4-in-1 Convertible Crib. This manual provides essential information for the safe assembly, use, and maintenance of your crib. Please read all instructions carefully before assembly and keep this manual for future reference.
The Bennett 4-in-1 Convertible Crib is designed to adapt to your child's growth, converting from a crib to a toddler bed, daybed, and full-size bed. It features a rustic gray finish and is GreenGuard Gold Certified, ensuring low chemical emissions for a healthier indoor environment.
2. Safety Information
Your child's safety is our highest priority. This crib meets or exceeds all safety standards set by the Consumer Product Safety Commission (CPSC) and the American Society for Testing and Materials (ASTM).
- Read All Instructions: Follow all assembly instructions and warnings carefully to ensure safe use.
- Mattress Requirements: Use only a crib mattress that is at least 27 1/4 inches (69 cm) wide, 51 5/8 inches (131 cm) long, and not more than 6 inches (15 cm) thick. The mattress must fit snugly, leaving no gaps larger than 1/2 inch (1.27 cm) between the mattress and any side of the crib.
- Avoid Suffocation Hazards: Do not place pillows, quilts, comforters, or extra padding in the crib. These can cause suffocation.
- Check for Damage: Regularly inspect the crib for damaged hardware, loose joints, missing parts, or sharp edges. Do not use the crib if any parts are missing or broken. Contact Oxford Baby for replacement parts. Do not substitute parts.
- Keep Away from Hazards: Do not place the crib near windows where cords from blinds or drapes could strangle a child. Keep the crib away from heaters, open flames, or other heat sources.
- Maximum Weight/Height: The crib, toddler bed, and daybed configurations are designed for children up to 50 pounds (22.7 kg) or 35 inches (89 cm) in height. The full-size bed configuration can accommodate up to 400 pounds (181.4 kg).
- Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
GREENGUARD Gold Certification
This product has achieved GREENGUARD Gold Certification. This means it has been rigorously tested for over 10,000 chemical emissions, ensuring that it contributes to cleaner indoor air quality for your home and your child.
Image: The Oxford Baby Bennett crib displaying the GREENGUARD Gold Certified logo, indicating low chemical emissions for improved indoor air quality.
3. Product Features
The Oxford Baby Bennett 4-in-1 Convertible Crib offers versatility and durability with its thoughtful design:
- 4-in-1 Convertibility: Easily transforms from a crib to a toddler bed, daybed, and full-size bed to grow with your child. Conversion kits for toddler and full-size beds are sold separately.
- Adjustable Mattress Height: Features 3 levels of mattress height adjustment to accommodate your growing child and ensure safety.
- Quality Construction: Crafted from solid woods and wood veneers, providing a sturdy and safe sleep environment.
- Elegant Design: Boasts rustic elegance with wainscoting detail, bold lines, beveled raised accents, and a flat, high-back full panel straight-line headboard, finished with a sophisticated wire-brushed texture.
Image: A visual representation of the crib's 4-in-1 functionality, illustrating its transformation from a crib to a toddler bed, daybed, and full-size bed.
4. Setup and Assembly
The Oxford Baby Bennett Crib arrives ready to assemble. Assembly requires a screwdriver (not included). All necessary hardware and an assembly instruction guide are included.
- Unpack Components: Carefully remove all parts from the packaging. Lay them out on a soft, clean surface to prevent scratches.
- Identify Parts: Refer to the included assembly instruction guide to identify all components and hardware. Ensure all parts are present before beginning assembly.
- Follow Instructions: Adhere strictly to the step-by-step instructions provided in the separate assembly manual. Do not deviate from the instructions.
- Tighten Hardware: Ensure all bolts and screws are securely tightened. Periodically check and re-tighten hardware as needed. Do not over-tighten.
- Final Inspection: After assembly, verify that the crib is stable, all parts are correctly installed, and there are no exposed sharp edges or loose components.
For detailed visual instructions, please refer to the PDF user manual available for download on the product page or via the link provided with your purchase.
Image: The fully assembled Oxford Baby Bennett 4-in-1 Convertible Crib in Rustic Gray, ready for use.
5. Operating and Usage
Crib Configuration
Use the crib for infants and toddlers who cannot climb out. Adjust the mattress support to the appropriate height:
- Highest Position: For newborns and infants who cannot push up on their hands and knees.
- Middle Position: For infants who can push up on their hands and knees.
- Lowest Position: For toddlers who can stand. Always use the lowest position once your child can stand.
Conversion to Toddler Bed, Daybed, and Full-Size Bed
The Bennett crib is designed to convert into a toddler bed, daybed, and full-size bed as your child grows. Conversion kits are required for these transformations and are sold separately. It is highly recommended to purchase these conversion accessories within a year of your initial crib purchase to avoid potential stock issues or product discontinuation.
- Toddler Bed: Replaces one side rail with a toddler guard rail (sold separately).
- Daybed: Removes the front rail, allowing open access (no guard rail).
- Full-Size Bed: Requires a full-size bed conversion kit (sold separately) to utilize the headboard and footboard with a standard full-size mattress and frame.
Image: A diagram illustrating the crib's dimensions and the three adjustable mattress height levels.
6. Maintenance
Proper care will ensure the longevity and safety of your Oxford Baby Bennett Crib.
- Cleaning: Wipe the crib surfaces with a damp cloth. Avoid using abrasive cleaners or strong chemicals, as these can damage the finish.
- Regular Inspection: Periodically check all screws, bolts, and other hardware to ensure they are tight and secure. Re-tighten as necessary.
- Storage: If storing the crib, do so in a dry, temperature-controlled environment to prevent warping or damage to the wood.
7. Troubleshooting
If you encounter any issues with your Oxford Baby Bennett Crib, please consider the following:
- Loose Parts: If any parts feel loose, re-check the assembly instructions and tighten all hardware securely.
- Squeaking: Ensure all connections are tight. A small amount of lubricant on metal-to-metal contact points (if applicable and safe for children's products) may help, but consult the manufacturer if unsure.
- Missing Parts or Damage: Do not attempt to use the crib if parts are missing or damaged. Contact Oxford Baby customer support immediately for assistance.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | 12811530 |
| Color | Rustic Gray |
| Product Dimensions (L x W x H) | 55.88" x 29.88" x 43.5" |
| Item Weight | 63.9 Pounds |
| Material | Solid Wood, Wood Veneers |
| Special Feature | Adjustable Height, Convertible (4-in-1) |
| Target Audience | Infant, Newborn, Toddler |
| Assembly Required | Yes |
| Maximum Weight Recommendation (Crib/Toddler/Daybed) | 50 Pounds |
| Maximum Weight Recommendation (Full-Size Bed) | 400 Pounds |
| Maximum Height Recommendation | 35 Inches |
| Certifications | GREENGUARD Gold Certified, CPSC, ASTM |
9. Warranty and Support
The Oxford Baby Bennett 4-in-1 Convertible Crib is backed by a 1 Year Limited Manufacturer’s Warranty. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, replacement parts, or any questions regarding your product, please contact Oxford Baby customer support. You can find more information and contact details by visiting the official Oxford Baby store:
