Grexemin Gre6-J6

Grexemin ABS Stimulator Training Equipment User Manual

Model: Gre6-J6

1. Introduction

Thank you for choosing the Grexemin ABS Stimulator Training Equipment. This device is designed to assist in toning, tightening, and strengthening your body muscles, including the abdomen, arms, and legs, through electrical muscle stimulation (EMS). It is a portable and USB rechargeable fitness solution for both men and women.

Please read this manual thoroughly before first use to ensure safe and effective operation. Keep this manual for future reference.

2. Safety Information

WARNING: Consult your physician before using this device if you have any pre-existing medical conditions, including but not limited to heart conditions, epilepsy, or if you are pregnant. Do not use if you have a pacemaker or any implanted electronic device.

  • Do not use on broken or irritated skin.
  • Do not use near the heart, head, mouth, or on any sensitive areas.
  • Keep out of reach of children.
  • Do not use while sleeping, driving, or operating heavy machinery.
  • If you experience any discomfort or pain, discontinue use immediately.
  • This device is not intended for medical use.
  • Ensure the gel pads are properly adhered to the skin for optimal contact and to prevent skin irritation.

3. Package Contents

  • 1 x Main Abdominal Pad
  • 2 x Arm/Leg Pads
  • 3 x Control Units
  • 1 x 3-in-1 USB Charging Cable
  • 1 x Pack of Replacement Gel Pads
  • 1 x User Manual (this document)
Grexemin ABS Stimulator kit showing the main abdominal pad, two smaller arm/leg pads, three control units, a 3-in-1 USB charging cable, and a pack of replacement gel pads. A man is shown wearing the abdominal and arm stimulators.

Figure 1: Grexemin ABS Stimulator components and typical usage.

4. Product Features

  • Body Toning: Designed to help tone, tighten, and strengthen muscles in the abdomen, arms, and legs.
  • Adjustable Intensity: Multiple modes and intensity levels to customize your training experience.
  • Self-Control Function: The controller activates only when the gel pads are properly adhered to the body, ensuring safe operation.
  • USB Rechargeable: Convenient USB charging for portability and long-lasting use.
  • Ergonomic Design: Contours to the body for effective muscle stimulation.
  • Automatic Shut-off: Defaults to a 20-minute session and automatically powers off after completion or inactivity.

5. Setup

  1. Prepare the Gel Pad: Carefully peel off the protective film from the gel pad. Ensure the adhesive surface is clean and free from dust.
  2. Attach the Controller: Align the two snap fasteners on the control unit with the corresponding fasteners on the ABS pad (abdominal, arm, or leg pad). Press firmly to secure the controller to the pad.
  3. Apply to Body: Place the assembled pad onto the desired muscle area. Ensure the entire gel pad makes firm contact with your skin. The device will only activate when proper skin contact is detected.
Step-by-step guide on how to use the stimulator: 1. Remove protection film from gel pad. 2. Attach controller to the pad. 3. Press '+' to start and 'M' to choose mode. 4. Press '-' to stop and recover film.

Figure 2: Easy to use setup steps.

6. Operating Instructions

  1. Power On and Start: With the pad firmly attached to your body, press the '+' button on the control unit to turn on the device and begin stimulation. The default session duration is 20 minutes.
  2. Select Mode: Press the 'M' button to cycle through the available stimulation modes. Each mode offers a different pattern of electrical pulses.
  3. Adjust Intensity: Use the '+' button to increase the intensity level and the '-' button to decrease it. Start with a low intensity and gradually increase to a comfortable yet effective level.
  4. Power Off: To stop the session before the automatic shut-off, press the '-' button repeatedly until the device powers off. Alternatively, simply remove the pad from your skin, and the device will power off automatically after a short period of inactivity.

7. Charging Instructions

The Grexemin ABS Stimulator control units are rechargeable via USB. Use the provided 3-in-1 USB charging cable to charge all three control units simultaneously.

  1. Connect the three micro-USB ends of the charging cable to the charging ports on each control unit.
  2. Connect the standard USB-A end of the cable to a compatible USB power source, such as a wall adapter, power bank, car charger, or computer USB port.
  3. The indicator light on the control unit will typically show charging status (e.g., red for charging, green/off for fully charged).
  4. Once fully charged, disconnect the cable.
Diagram showing the 3-in-1 USB charging cable connected to three control units, with icons for car charge, charger, power bank, and laptop as power sources.

Figure 3: 3-in-1 USB charging cable for simultaneous charging.

8. Usage Recommendations

  • Frequency: Use for approximately 20 minutes per session, 1 to 2 times per day.
  • Equivalent Exercise: A 20-minute session is comparable to 2000 meters of running, 60 minutes of sit-ups, or 60 minutes of free swimming.
  • Consistency: Consistent use over approximately two months can lead to noticeable results in muscle toning and strengthening.
  • Portability: The compact design allows for use anytime, anywhere – whether working, exercising, or relaxing.
Infographic illustrating the time equivalency of 20 minutes of use: 2000m running, 60 minutes sit-ups, 60 minutes exercise. Also shows images of people exercising and a healthy meal.

Figure 4: Exercise equivalency for 20 minutes of use.

Collage showing the portability of the device, usable during working, sporting, shopping, and parties, emphasizing 'Fitness Anytime Anywhere'.

Figure 5: Portability and versatile usage scenarios.

9. Maintenance and Care

  • Cleaning Pads: After each use, gently wipe the gel pads with a damp cloth. Do not use harsh chemicals or abrasive cleaners.
  • Storing Pads: After cleaning, reattach the protective film to the gel pads to maintain their adhesive quality and prevent dust accumulation. Store in a cool, dry place.
  • Replacing Gel Pads: The gel pads are consumable and will lose their adhesiveness over time. Replace them with new ones when they no longer stick effectively to your skin.
  • Cleaning Control Units: Wipe the control units with a soft, dry cloth. Do not immerse in water.

10. Troubleshooting

ProblemPossible CauseSolution
Device does not turn on.Low battery; Gel pads not making proper contact.Charge the control unit; Ensure gel pads are firmly adhered to clean, dry skin.
Weak or no sensation.Low intensity setting; Worn out gel pads; Poor skin contact.Increase intensity; Replace gel pads; Reapply pads ensuring full contact.
Skin irritation.Prolonged use; Sensitive skin; Dirty gel pads.Reduce session duration; Discontinue use if irritation persists; Clean gel pads and skin thoroughly before use.

11. Specifications

  • Brand: Grexemin
  • Model Number: Gre6-J6
  • Main Material: Acrylonitrile Butadiene Styrene (ABS)
  • Power Source: Lithium-polymer battery (3 included)
  • Charging: USB Rechargeable
  • Style: Modern
  • Package Dimensions: Approximately 26.19 x 23.7 x 3.2 cm
  • Weight: Approximately 340 grams

12. Warranty and Support

Warranty information for the Grexemin ABS Stimulator Training Equipment is not provided within this manual. Please refer to the retailer or your purchase documentation for details regarding warranty coverage and customer support.

© 2023 Grexemin. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.