vidaXL Wall-Mounted Bedside Tables (2 pcs, White, 50x36x25 cm) - Instruction Manual

Introduction

Thank you for purchasing the vidaXL Wall-Mounted Bedside Tables. These elegant and functional bedside tables are designed to provide convenient storage and a modern aesthetic to your bedroom. This manual provides essential information for safe assembly, installation, usage, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

Image: The vidaXL Wall-Mounted Bedside Tables installed in a bedroom.

Safety Information

Please observe the following safety precautions during assembly and use:

• Always ensure all components are securely fastened before use.
• Do not exceed the recommended weight capacity for the table top or drawer.
• Important: Screws and wall plugs for wall mounting are not included. You must select appropriate screws and wall plugs for your specific wall type (e.g., plasterboard, brick, concrete). If unsure, consult a professional.
• Keep small parts and packaging materials away from children to prevent choking hazards.
• Assemble on a soft, clean surface to prevent scratching the furniture.

Package Contents

Before assembly, verify that all parts are present and undamaged. Each package contains components for two (2) bedside tables.

Components List:

• Engineered wood panels (various sizes for top, sides, bottom, back, drawer)
• Drawer slides (left and right)
• Drawer handle(s)
• Assembly hardware (dowels, cam locks, screws for furniture assembly)
• Assembly manual (included in the box)

Note: Wall mounting hardware (screws and plugs) is not supplied and must be purchased separately based on your wall type.

Setup and Assembly

Follow these steps carefully to assemble and mount your bedside tables. It is recommended to have two people for assembly and installation.

Tools Required (Not Included):

• Screwdriver (Phillips head)
• Hammer (for dowels)
• Drill (for wall mounting)
• Level
• Measuring tape
• Pencil
• Appropriate wall mounting screws and plugs

Assembly Steps:

1. Unpack and Identify Parts: Carefully unpack all components and lay them out on a clean, soft surface. Refer to the included assembly manual for a detailed diagram of all parts and hardware.
2. Assemble the Main Frame: Connect the side panels to the top and bottom panels using the provided dowels and cam locks. Ensure all connections are tight and secure.
3. Install Drawer Slides: Attach the drawer slides to the inner side panels of the main frame using the small screws. Ensure they are level and correctly oriented.
4. Assemble the Drawer: Construct the drawer box using the smaller engineered wood panels, dowels, and cam locks. Attach the remaining drawer slide components to the sides of the drawer.
5. Attach Drawer Handle: Secure the drawer handle to the front panel of the drawer.
6. Insert Drawer: Carefully slide the assembled drawer into the main frame, aligning the drawer slides.
7. Attach Back Panel: Secure the back panel to the main frame using small nails or screws.

Image: Assembled bedside table, front view.

Wall Mounting Instructions:

8. Choose Location: Select a suitable location on your wall, ensuring it is free from electrical wires or plumbing. Consider the desired height relative to your bed.
9. Mark Drilling Points: Hold the assembled bedside table against the wall at the desired height. Use a level to ensure it is straight. Mark the positions for the mounting holes on the wall with a pencil.
10. Drill Holes: Using an appropriate drill bit for your wall type and selected wall plugs, drill holes at the marked positions.
11. Insert Wall Plugs: Insert the wall plugs into the drilled holes. Ensure they fit snugly.
12. Mount the Table: Align the mounting points on the back of the bedside table with the wall plugs. Insert the appropriate screws through the table's mounting points and into the wall plugs. Tighten securely. Do not overtighten.
13. Verify Stability: Gently pull on the mounted table to ensure it is firmly attached to the wall and does not wobble.

Image: Bedside table with drawer open, demonstrating storage.

Operating and Usage

Your vidaXL Wall-Mounted Bedside Tables are designed for convenient storage and display.

• Drawer Functionality: The drawer slides smoothly for easy opening and closing. Avoid forcing the drawer if it feels stiff.
• Weight Capacity: Do not place excessively heavy items on the table top or inside the drawer. Distribute weight evenly.
• Display Surface: The top surface is suitable for decorative items, lamps, books, and other lightweight personal belongings.

Image: Bedside table displaying decorative items.

Maintenance

Proper care will ensure the longevity and appearance of your bedside tables.

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
• Spills: Clean up spills immediately to prevent staining or damage to the engineered wood.
• Hardware Check: Periodically check all screws and fasteners to ensure they remain tight. Retighten if necessary.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or discoloration.
• Humidity Control: Maintain a stable room temperature and humidity to prevent warping or cracking of the wood material.

Troubleshooting

If you encounter any issues, refer to the following common problems and solutions:

• Table feels wobbly after mounting:
  • Ensure all wall mounting screws are fully tightened.
  • Verify that the correct type of wall plugs and screws were used for your wall material.
  • Check if the wall itself is stable and capable of supporting the weight.
• Drawer does not slide smoothly:
  • Check if the drawer slides are correctly installed and aligned.
  • Ensure no objects are obstructing the drawer's movement.
  • Verify that all screws on the drawer slides are tight.
• Missing parts:
  • Carefully re-check all packaging materials.
  • Contact vidaXL customer support with your product model number and a description of the missing part.

Specifications

Key technical details for the vidaXL Wall-Mounted Bedside Tables:

Image: Dimensional diagram of the bedside table.

Warranty and Support

vidaXL products are manufactured to high-quality standards. For warranty information, missing parts, or technical support, please refer to the warranty card included in your package or visit the official vidaXL website. Please have your model number (816841) and purchase details ready when contacting support.

You can also visit the vidaXL Store on Amazon for more product information.