Welcome
This manual provides essential information for the safe and efficient use of your Oraimo Electric Bike, model Sciiti 100. Please read it thoroughly before your first ride and keep it for future reference.
Important Safety Guidelines
- Always wear a helmet when riding your electric bike.
- Familiarize yourself with local traffic laws and regulations.
- Perform a pre-ride inspection before each use, checking brakes, tires, and battery.
- Ensure the battery is securely locked in place before riding.
- This electric bike complies with UL 2849 safety standards, ensuring a safe riding experience.
Product Overview
The Oraimo Sciiti 100 Electric Bike is designed for comfortable city commuting, featuring a robust aluminum frame and powerful electric assistance.
Key Features
- Motor: 350W (Peak 500W) Brushless Motor for efficient power and climbing assistance.
- Battery: 374Wh Li-ion Removable Battery, offering up to 40 miles range (pedal-assist mode) and 3.5H fast charging.
- Frame: Integrated Aluminum Frame, built for durability and double load capacity.
- Gears: Shimano 7-Speed Gear system for versatile riding.
- Saddle: Enlarged Air Saddle for enhanced comfort.
- Brakes: Front & Rear Disc Brakes for reliable stopping power.
- Suspension: Front Fork Suspension to absorb shocks and provide a smoother ride.
Figure 1: The Oraimo Sciiti 100 Electric Bike, showcasing its design and integrated saddlebag.
Figure 2: The 374Wh Li-ion battery featuring 3.5H fast charging capability.
Figure 3: Multi-adjustable riding position with enlarged air saddle and adjustable handlebar for customized comfort.
Figure 4: Exclusive integrated frame design built for durability and enhanced safety.
Setup
Unboxing and Initial Setup
The Oraimo Electric Bike comes partially assembled. Follow these steps to complete the assembly process. For a visual guide, please refer to the video below.
Video 1: Detailed guide on unboxing and assembling your Oraimo Sciiti 100 Electric Bike. This video covers separating components, installing the handlebar, front wheel, fender, pedals, and gearbox protector.
Handlebar Installation
Insert the handlebar stem into the fork tube. Ensure the safety line on the stem is not visible above the headset. Tighten the top bolt with an Allen wrench. Adjust the handlebar angle by loosening the front screw, positioning the handlebar, and then re-tightening the screw. Ensure the safety lines on the handlebar are not visible.
Front Wheel Installation
Remove the protective bolts from the front fork. Attach the brake rotor to the wheel hub using the provided screws and Allen wrench. Carefully slide the front wheel into the fork, ensuring the brake rotor aligns with the brake caliper. Insert the quick-release skewer through the wheel hub, ensuring the springs are correctly positioned. Tighten the skewer nut and secure the quick-release lever.
Fender Installation
Slide the front fender into position above the front wheel. Align the fender's mounting hole with the hole on the front fork. Insert the provided screw with a washer through the fender and fork, then secure it with another washer and nut from the back. Tighten using a wrench and Allen wrench.
Pedal Installation
Identify the left (L) and right (R) pedals. The left pedal screws counter-clockwise, and the right pedal screws clockwise. Carefully thread each pedal into its corresponding crank arm. Tighten securely with a wrench.
Gearbox Protector Installation
Locate the gearbox protector. Remove the designated screw near the rear derailleur. Position the gearbox protector so it slides underneath the spoke and aligns with the screw hole. Re-insert and tighten the screw to secure the protector in place.
Operating Your Electric Bike
Riding Modes
Your Oraimo Electric Bike offers multiple riding modes to suit your preference and terrain:
- Throttle Mode: Provides power without pedaling, similar to a scooter.
- Pedal-assist Mode: The motor provides assistance as you pedal, with adjustable levels of support.
- Pedal-only Mode: Ride the bike like a traditional bicycle without motor assistance.
- Walk-assist Mode: Provides low-speed assistance for walking the bike.
Battery Charging
To charge the battery, remove it from the bike by unlocking it with the key. Connect the charger to the battery's 3-pin connector, then plug the charger into a power outlet. The indicator light on the charger will show the charging status. A full charge takes approximately 3.5 hours.
Display and Controls
The handlebar-mounted display allows you to control power, switch riding modes, and monitor battery level. Press the power button to turn the bike on/off. Use the '+' and '-' buttons to adjust pedal-assist levels.
Maintenance
Care and Maintenance
- Cleaning: Use a soft, damp cloth to clean the bike frame. Avoid high-pressure water jets directly on electrical components.
- Tire Pressure: Regularly check tire pressure and inflate to the recommended PSI (usually found on the tire sidewall).
- Brakes: Inspect brake pads and rotors regularly for wear. Adjust brake levers for optimal stopping power.
- Chain: Keep the chain clean and lubricated for smooth gear changes and to prevent rust.
- Battery Care: Store the battery in a cool, dry place. Charge it regularly, even if not in use, to maintain battery health. Avoid fully discharging the battery.
- General Inspection: Periodically check all bolts and fasteners for tightness.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bike not powering on | Battery not charged or not properly seated. | Charge battery fully. Ensure battery is securely inserted and locked. |
| Motor not assisting | Low battery, wrong riding mode, or loose connection. | Check battery level. Switch to pedal-assist or throttle mode. Inspect motor cable connections. |
| Brakes feel weak | Worn brake pads or misaligned calipers. | Inspect and replace brake pads if worn. Adjust brake calipers for proper alignment. |
| Unusual noises during ride | Loose components, dry chain, or misaligned gears. | Check all bolts and fasteners. Lubricate chain. Consult a bike mechanic for gear adjustment. |
Technical Specifications
| Specification | Value |
|---|---|
| Bike Type | Hybrid Bike, Electric Bike |
| Age Range | Adult |
| Brand | Oraimo |
| Number of Speeds | 7 |
| Color | White |
| Wheel Size | 26 Inches |
| Frame Material | Aluminum |
| Suspension Type | Front |
| Special Feature | Lightweight |
| Included Components | Electric Bike, Charger |
| Maximum Weight Recommendation | 300 Pounds |
| Lithium Battery Energy Content | 374 Watt Hours |
Warranty and Customer Support
Warranty Information
Your Oraimo Electric Bike comes with a 12-month limited warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects but does not cover normal wear and tear, misuse, or accidental damage.
Customer Support
For any questions, technical assistance, or warranty claims, please contact Oraimo customer support:
- Phone: +1 833 711 0606 (Monday - Friday 8:30-17:30 PST)
- Live Chat: Available via the Official Oraimo Website
- User Manual (PDF): A detailed PDF version of this manual is available for download here.
