Yaheetech Saddle Stool Instruction Manual
Model: YTdgb90001001
Introduction
Thank you for choosing the Yaheetech Saddle Stool. This manual provides essential information for the proper assembly, operation, and maintenance of your new saddle chair. Designed for comfort and versatility, this stool is ideal for various professional and home environments, including barbershops, hair salons, tattoo parlors, doctor's offices, and more. Its ergonomic design promotes correct sitting posture, helping to alleviate pressure on your back.
Important Safety Notice: Please do not stand on this saddle chair to ensure its normal use and your safety.
Setup
Package Contents:
- Saddle Seat
- Base with 5-star legs
- Gas Lift Cylinder
- 5 Swivel Castors
- Mounting Plate with Lever
- Screws and Allen Wrench
Image: All components required for assembly.
Assembly Instructions:
Attach Castors to Base: Firmly insert each of the five swivel castors into the holes at the end of the 5-star base legs. Push until they click securely into place.
Insert Gas Lift: Place the gas lift cylinder into the center hole of the assembled 5-star base.
Attach Mounting Plate to Seat: Align the mounting plate with the pre-drilled holes on the underside of the saddle seat. Secure it using the provided screws and Allen wrench. Ensure the lever is facing the front or side for easy access.
Connect Seat to Gas Lift: Carefully place the assembled saddle seat onto the top of the gas lift cylinder. Press down firmly to ensure a secure connection.
Image: Step-by-step assembly guide.
Assembly typically takes less than 10 minutes with all accessories included.
Operating Instructions
Height Adjustment:
The Yaheetech Saddle Stool features an easy-to-use hydraulic gas lift system for height adjustment.
To Lower the Seat: While sitting on the stool, pull the lever located under the seat upwards. The seat will lower under your weight. Release the lever when the desired height is reached.
To Raise the Seat: While standing next to the stool, pull the lever upwards. The seat will rise automatically. Release the lever when the desired height is reached.
Image: Adjustable lever and base features.
Mobility:
The stool is equipped with five 360-degree swivel castors, allowing for smooth and effortless movement across various surfaces without causing damage. This feature is particularly useful in environments requiring frequent repositioning or changes in orientation.
Image: Overall view of the saddle stool.
Image: Saddle stools in a kitchen environment.
The ergonomic saddle shape is designed to provide a comfortable experience by reducing painful pressure on the back and preventing sliding during movement, promoting correct sitting posture.
Image: Correcting sitting posture with the saddle stool.
Maintenance
Cleaning:
The PU leather seat is soft, waterproof, and easy to clean. Simply wipe with a damp cloth to remove dust or spills. Avoid using harsh chemicals or abrasive cleaners, as they may damage the material.
General Care:
- Regularly check all screws and connections to ensure they remain tight.
- Keep the castors clean from hair, dust, and debris to ensure smooth rolling.
- Store the stool in a dry environment away from direct sunlight or extreme temperatures to preserve the integrity of the materials.
Troubleshooting
Stool Not Adjusting Height:
- Ensure the lever is fully pulled up when attempting to adjust the height.
- If lowering, ensure you are sitting on the stool to apply sufficient weight.
- If raising, ensure you are standing off the stool.
- Check for any obstructions around the gas lift cylinder.
Wheels Not Rolling Smoothly:
- Inspect the castors for accumulated hair, dust, or debris. Clean them thoroughly.
- Ensure the castors are fully inserted into the base legs.
Stool Feels Unstable:
- Verify that all assembly screws are tightened securely.
- Ensure the gas lift cylinder is properly seated in both the base and the seat.
- Do not exceed the maximum weight recommendation of 256 pounds.
Specifications
| Feature | Detail |
|---|---|
| Brand | Yaheetech |
| Model Number | YTdgb90001001 |
| Color | Black |
| Product Dimensions (D x W x H) | 19.7" x 19.7" x 17.9"-23.6" |
| Seat Width | 12.8 Inches |
| Adjustable Seat Height Range | 17.9 - 23.6 inches (45.5 - 60 cm) |
| Maximum Weight Recommendation | 256 Pounds |
| Item Weight | 8.25 pounds |
| Material | PU Leather, Steel, Nylon |
| Assembly Required | Yes |
| Product Care Instructions | Wipe with Damp Cloth |
Image: Product dimensions.
Official Product Video
Watch the official Yaheetech product video for a visual guide on the saddle stool's features and functionality.
Video: Official product overview of the Yaheetech Saddle Stool, demonstrating its features like height adjustment, 360-degree swivel, and ergonomic design.
Warranty and Support
For specific warranty information and customer support, please refer to the documentation included with your product packaging or visit the official Yaheetech website. You can also contact their customer service for assistance with any product-related inquiries or issues.
