Important Safety Instructions
Always read and understand all safety warnings and instructions before operating this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
- Wear appropriate personal protective equipment (PPE) including safety glasses, gloves, and hearing protection.
- Keep hands and feet away from the chain when the tool is operating.
- Ensure the work area is clear of bystanders and obstacles.
- Do not operate in wet conditions or expose to rain.
- Always remove the battery pack when not in use or when changing accessories.
- Use only BLACK+DECKER recommended accessories and replacement parts.
Product Overview
The BLACK+DECKER 20V MAX Pruning Chainsaw Kit (Model BCCS320C1) is a lightweight and compact cordless tool designed for easy pruning tasks. It features a 6-inch bar and chain with up to 4-inch cut capacity, an integrated tip guard for stability, and bolt lock chain tensioning.
Figure 1: Front view of the BLACK+DECKER 20V MAX Pruning Chainsaw. This image shows the compact design and the 6-inch bar and chain.
Figure 2: Side view of the BLACK+DECKER 20V MAX Pruning Chainsaw, highlighting its ergonomic handle and battery placement.
Setup
Battery Installation and Removal
- To install the battery, align the battery pack with the tool's battery port and slide it in until it clicks securely into place.
- To remove the battery, press the red release button located at the base of the battery and slide the battery pack out.
Figure 3: Close-up view of the battery slot on the BLACK+DECKER 20V MAX Pruning Chainsaw, showing where the battery pack is inserted.
Chain Tensioning
The pruning chainsaw features bolt lock chain tensioning for reliable bar clamping. Refer to the diagram for the location of the onboard wrench holder for easy tension adjustment.
Figure 4: Image showing the BLACK+DECKER 20V MAX Pruning Chainsaw with its storage sheath and onboard wrench holder, used for chain tensioning.
Operating Instructions
Starting the Chainsaw
- Ensure the battery is fully charged and securely installed.
- To start the chainsaw, push the safety button located on the handle and then squeeze the trigger.
- Release the safety button once the trigger is engaged.
Cutting Techniques
For optimal performance and safety, use the integrated tip guard to provide stability during upcuts. Always maintain a firm grip with both hands on the tool.
Figure 5: A user demonstrating the proper two-hand grip while operating the BLACK+DECKER 20V MAX Pruning Chainsaw for cutting branches.
Figure 6: Close-up of the BLACK+DECKER 20V MAX Pruning Chainsaw in action, cutting a small branch. Note the sawdust indicating active cutting.
Video 1: Demonstration of the BLACK+DECKER 20V MAX Pruning Chainsaw cutting a branch. This video illustrates the cutting action and the tool's performance.
Maintenance
Chain Oiling
This chainsaw model does not feature an automatic oiler. It is crucial to manually oil the chain frequently to ensure smooth operation and prolong the life of the chain and bar. Apply a high-quality bar and chain oil or SAE30 weight motor oil. Vegetable-based bar and chain oil is recommended when pruning trees. Avoid mineral oil or very thick oil as they may damage your saw.
Lubricate the whole saw chain evenly before each use and after every few cuts. A small amount of oil applied directly to the chain and guide bar is sufficient.
Figure 7: Diagram illustrating the proper method for chain oiling (Fig. I) and a troubleshooting table for common issues.
Cleaning and Storage
- After each use, clean the tool thoroughly to remove sawdust and debris.
- Store the chainsaw in a dry, secure location, out of reach of children.
- Always store with the battery removed and the storage sheath covering the bar and chain.
Troubleshooting
Refer to the table below for common issues and their solutions.
| Problem | Solution |
|---|---|
| Unit will not start. |
|
| Unit shuts down in use. |
|
| Battery will not charge. |
|
Specifications
- Brand: BLACK+DECKER
- Model: BCCS320C1
- Power Source: Battery Powered
- Bar and Chain Size: 6 inches
- Cut Capacity: Up to 4 inches
- Item Weight: 7.8 Pounds
- Product Dimensions: 20.4"L x 10.75"W x 5.4"H
- Battery: 20V MAX Lithium Ion (included)
Warranty and Support
For warranty information and customer support, please visit the official BLACK+DECKER website or contact their customer service. Keep your purchase receipt for warranty claims.
Protection Plans:
- 2-Year Protection Plan: $16.99
- 3-Year Protection Plan: $23.99
- Complete Protect: One plan covers all eligible past and future purchases ($16.99/month)
For further assistance, you may visit the BLACK+DECKER Store on Amazon.
