Philips OneBlade Face QP2724/10 User Manual

Introduction

The Philips OneBlade QP2724/10 is a revolutionary hybrid styler designed for facial grooming. It can effectively trim, shave, and create precise lines and edges on any hair length. This device eliminates the need for multiple tools, offering a comprehensive solution for your grooming needs.

Key features include its unique OneBlade technology, three stubble combs (1, 3, 5 mm) for versatile styling, a dual-sided blade for precision, and full waterproof capability for convenient wet or dry use. The rechargeable NiMH battery provides 45 minutes of consistent shaving power after an 8-hour charge.

Important Safety Information

Please read this user manual carefully before using the appliance and save it for future reference. Incorrect use may lead to hazards or serious injuries.

• This appliance is fully waterproof. It is suitable for use in the bath or shower. For safety reasons, the appliance can only be used cordless.
• Do not use the appliance if the blade is damaged or broken, as this may cause injury.
• Always check the appliance before use. Do not use the appliance if it is damaged.
• Keep the charging cable away from heated surfaces.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.

Package Contents

The Philips OneBlade Face QP2724/10 package includes the following components:

• Philips OneBlade Handle
• OneBlade Blade (pre-attached or separate)
• 3 Stubble Combs (1mm, 3mm, 5mm)
• USB-A Charging Cable

Image: The Philips OneBlade Face QP2724/10, showcasing the main device, three different sized stubble combs, and the USB charging cable. This image illustrates all components typically found in the product packaging.

Setup

Charging the OneBlade

1. Ensure the OneBlade is dry before charging.
2. Insert the small end of the USB charging cable into the charging port at the bottom of the OneBlade handle.
3. Connect the USB-A end of the cable to a compatible USB power adapter (not included) or a USB port on a computer.
4. The charging indicator light on the handle will illuminate to show that the device is charging.
5. Allow approximately 8 hours for a full charge, which provides up to 45 minutes of cordless use.

Attaching and Detaching the Blade

• To attach: Align the blade with the handle and push it firmly until you hear a click.
• To detach: Press the release button on the back of the blade and pull it away from the handle.

Attaching and Detaching Stubble Combs

• To attach: Select the desired stubble comb (1mm, 3mm, or 5mm). Slide the comb onto the blade until it clicks into place.
• To detach: Gently pull the comb away from the blade.

Operating Instructions

The Philips OneBlade is designed for both wet and dry use, with or without foam. It does not shave as close as a traditional blade, ensuring comfort for your skin.

Trimming

1. Attach one of the stubble combs (1mm, 3mm, or 5mm) to the blade.
2. Turn on the OneBlade by pressing the power button.
3. Hold the OneBlade flat against your skin and move it against the direction of hair growth.
4. Use the 1mm comb for a tight stubble, 3mm for a short beard, and 5mm for a longer stubble.

Shaving

1. Remove any attached stubble comb.
2. Turn on the OneBlade.
3. Hold the blade flat against your skin and move it in long strokes against the direction of hair growth.
4. The OneBlade is designed to shave comfortably without cutting too close, reducing irritation.

Edging and Creating Lines

1. Remove any attached stubble comb.
2. Turn on the OneBlade.
3. Use the dual-sided blade to create precise lines and edges. Hold the blade perpendicular to your skin to define sharp lines.
4. The blade can be used in either direction for optimal visibility and control.

Maintenance

Cleaning the OneBlade

• After each use, turn off the OneBlade.
• Rinse the blade and the stubble comb (if used) under warm running water.
• Shake off excess water and allow the components to air dry completely before storing or reattaching.
• Do not use abrasive cleaning agents or harsh chemicals.

Blade Replacement

For optimal performance, it is recommended to replace the OneBlade blade every 4 months, or sooner if the blade appears dull or damaged. A green indicator on the blade will gradually fade to white, signaling that it's time for a replacement.

• To replace, detach the old blade as described in the "Setup" section.
• Attach a new Philips OneBlade replacement blade.

Storage

Store the OneBlade and its accessories in a clean, dry place, away from direct sunlight and extreme temperatures.

Troubleshooting

Specifications

• Model Number: QP2724/10
• Brand: PHILIPS
• Power Source: Rechargeable NiMH Battery
• Battery Life: Up to 45 minutes cordless use
• Charging Time: 8 hours for full charge
• Waterproof: Yes, fully waterproof for wet & dry use
• Blade Material: Stainless Steel
• Included Combs: 1mm, 3mm, 5mm stubble combs
• Dimensions (L x W x H): 3.6 x 10 x 17.8 cm (approximately 1.4 x 3.9 x 7.0 inches)
• Weight: 150 grams (approximately 5.3 ounces)

Warranty and Support

Warranty Information

This Philips OneBlade Face QP2724/10 comes with a 2-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

The warranty does not cover damage caused by misuse, neglect, unauthorized modification, or normal wear and tear of consumable parts like the blade.

Customer Support

For further assistance, product registration, or to find replacement parts and accessories, please visit the official Philips support website or contact their customer service. You can often find detailed FAQs and troubleshooting guides online.

Visit Philips Support Website