E ECSEM Keep B3 Replacement Band

E ECSEM Keep B3 Fitness Tracker Replacement Band User Manual

Model: Keep B3 Replacement Band

Introduction

This manual provides instructions for the installation, use, and maintenance of your E ECSEM replacement silicone sport wristband, designed for compatibility with the Keep B3 Fitness Tracker. Please read these instructions carefully to ensure proper use and longevity of your product.

Product Features

  • Compatibility: Specifically designed for Keep B3 Fitness Tracker.
  • Material: Made from high-performance, soft silicone for comfort and durability.
  • Design: Breathable and lightweight, suitable for sports and daily wear.
  • Adjustable Fit: Designed to fit wrist sizes from 5.5 inches to 8.7 inches.
  • Secure Closure: Features a metal buckle and fastener loop for a secure fit.

Setup: Band Installation

Follow these steps to correctly install the replacement band onto your Keep B3 Fitness Tracker.

  1. Remove Existing Band: If a band is currently attached, locate the quick-release pins on the underside of the tracker where the band connects. Slide the pin inward to detach the old band.
  2. Identify Band Sections: The replacement band consists of two sections: one with the buckle and one with the holes.
  3. Attach Buckle Section: Take one section of the new band. Insert one end of the quick-release pin into the corresponding hole on the tracker's lug.
  4. Secure Pin: While holding that end in place, slide the quick-release pin lever inward. Align the other end of the pin with the opposite hole on the tracker's lug and release the lever. Gently tug the band to ensure it is securely attached.
  5. Attach Other Section: Repeat the process for the second section of the band.
Back of Keep B3 Fitness Tracker with band attachment points
Image: Underside of the Keep B3 Fitness Tracker showing the attachment mechanism for the wristband. This view helps in understanding how to align the quick-release pins for installation.

Operating: Wearing and Adjustment

Once installed, wear your Keep B3 Fitness Tracker with the E ECSEM replacement band as follows:

  1. Positioning: Place the tracker on your wrist, ensuring the sensor on the back makes good contact with your skin.
  2. Fastening: Thread the end of the band through the metal buckle and secure it by inserting the pin into one of the adjustment holes.
  3. Adjusting Fit: Adjust the band to a comfortable tightness. It should be snug enough to prevent movement during activity but not so tight as to restrict circulation. The band is designed to fit wrist sizes between 5.5 inches and 8.7 inches.
  4. Securing Loop: Slide the fastener loop over the excess band to keep it neatly in place.
Diagram showing minimum and maximum wrist circumference for the band
Image: A diagram illustrating the minimum (5.5 inches) and maximum (8.7 inches) wrist circumference that the band can accommodate, ensuring a proper fit for various users.
Keep B3 Fitness Tracker with E ECSEM band on a female wrist
Image: The Keep B3 Fitness Tracker with the E ECSEM replacement band worn on a female wrist, demonstrating a typical fit.
Keep B3 Fitness Tracker with E ECSEM band on a male wrist
Image: The Keep B3 Fitness Tracker with the E ECSEM replacement band worn on a male wrist, illustrating the band's versatility.

Maintenance and Care

To ensure the longevity and hygiene of your E ECSEM replacement band, follow these care instructions:

  • Regular Cleaning: Clean the band regularly with a soft, damp cloth. For deeper cleaning, use mild soap and water, then rinse thoroughly.
  • Drying: Ensure the band is completely dry before reattaching it to your wrist or tracker to prevent skin irritation.
  • Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the silicone material.
  • Storage: When not in use, store the band in a cool, dry place away from direct sunlight to prevent material degradation.

Troubleshooting

ProblemPossible CauseSolution
Band does not attach securely.Quick-release pin not fully engaged or misaligned.Ensure both ends of the quick-release pin are properly seated in the tracker's lugs. Gently tug to confirm security.
Band feels uncomfortable or causes irritation.Band is too tight, not cleaned regularly, or allergic reaction.Adjust the band for a looser fit. Clean the band thoroughly. If irritation persists, discontinue use and consult a doctor.
Band appears discolored or worn.Exposure to harsh chemicals, prolonged direct sunlight, or heavy use.Follow maintenance guidelines. Consider replacing the band if wear affects functionality or appearance significantly.

Specifications

  • Model Compatibility: Keep B3 Fitness Tracker
  • Material: High-performance Silicone
  • Wrist Size Range: 5.5 inches - 8.7 inches (140mm - 220mm)
  • Band Width: Approximately 20mm
  • Band Length (Long Section): Approximately 122mm
  • Band Length (Short Section with Buckle): Approximately 95mm
  • Closure Type: Metal buckle with fastener loop
E ECSEM replacement band for Keep B3 Fitness Tracker
Image: A general view of the E ECSEM replacement band, showcasing its design and material.
Detailed dimensions of the E ECSEM replacement band sections
Image: Detailed measurements of the two band sections, indicating widths and lengths for precise fitment.

Warranty and Support

E ECSEM products are designed for quality and durability. For specific warranty information or technical support, please refer to the product packaging or contact E ECSEM customer service directly. Contact details can typically be found on the official E ECSEM website or through your purchase platform.

For further assistance, you may visit the E ECSEM Store on Amazon.

© 2023 E ECSEM. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.