Introduction
Thank you for choosing the SPC 7608N DECT KEOPS Black Telephone. This manual provides essential information for setting up, operating, and maintaining your new cordless telephone. Please read this manual carefully before using the telephone to ensure proper and safe operation.
Safety Information
To reduce the risk of fire, electric shock, or injury, always follow basic safety precautions when using this product.
- Use only the power adapter and batteries supplied with the product.
- Do not expose the telephone to water or moisture.
- Avoid placing the telephone near heat sources or direct sunlight.
- Do not attempt to open or repair the telephone yourself. Refer all servicing to qualified personnel.
- Keep the telephone out of reach of small children.
Package Contents
Verify that all items are present in your package:
- SPC 7608N DECT Handset
- Base Unit
- Power Adapter
- Telephone Line Cord
- 1 x AAAA Rechargeable Battery
- User Manual (this document)
Setup
1. Battery Installation
Before using the handset, you must install the rechargeable AAAA battery.
- Locate the battery compartment cover on the back of the handset.
- Slide the cover downwards to open it.
- Insert the AAAA battery, observing the correct polarity (+ and -).
- Slide the cover back into place until it clicks.
2. Connecting the Base Unit
Connect the base unit to your telephone line and power outlet.
- Plug one end of the telephone line cord into the TEL LINE jack on the base unit.
- Plug the other end of the telephone line cord into your wall telephone jack.
- Plug the small end of the power adapter into the DC IN jack on the base unit.
- Plug the large end of the power adapter into a standard electrical outlet.
3. Charging the Handset
Place the handset on the base unit's charging cradle. The battery icon on the handset display will indicate charging status. Allow at least 10 hours for the initial charge.
Image: The SPC 7608N DECT KEOPS Black Telephone handset is shown resting in its black charging base. The handset features a black body with a yellow-orange backlit display showing "SPC 1" and battery/signal indicators. Below the screen are navigation buttons, call/end buttons, and a standard numeric keypad with additional function keys.
4. Initial Setup (Date, Time, Language)
Once charged, the handset may prompt you to set the date, time, and language. Follow the on-screen instructions using the navigation and OK/MENU buttons.
Operating Instructions
Making Calls
- Dialing Directly: Pick up the handset or press the Call button, then dial the phone number.
- Pre-dialing: Dial the number first, then press the Call button.
- From Phonebook: Press OK/MENU, navigate to "Phonebook", select the entry, and press Call.
Receiving Calls
When the phone rings, press the Call button to answer. To end a call, press the End button or place the handset back on the base unit.
Adjusting Volume
During a call, use the Up/Down navigation buttons to adjust the earpiece volume.
Phonebook
Store frequently called numbers in the phonebook. Access it via the OK/MENU button. You can add, edit, or delete entries.
Redial
Press the Redial button (often the Call button when idle, or a dedicated button) to view and redial the last numbers called.
Mute Function
During a call, press the Mute button (if available, often a soft key or specific button) to temporarily turn off your microphone.
Digital Answering System
Your telephone is equipped with a digital answering system. Refer to the specific menu options under OK/MENU for setting up your greeting, playing messages, and deleting messages.
Maintenance
- Cleaning: Wipe the telephone and base unit with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Battery Care: To prolong battery life, avoid overcharging by leaving the handset off the base for extended periods when not in use. If the phone will not be used for a long time, remove the battery.
- Storage: Store the telephone in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No dial tone | Telephone line cord is disconnected. | Ensure the telephone line cord is securely plugged into the base unit and wall jack. |
| Handset not charging | Handset not properly seated on base; dirty charging contacts. | Reseat the handset. Clean charging contacts on both handset and base with a dry cloth. |
| Poor call quality / Static | Handset too far from base; interference from other electronic devices. | Move closer to the base unit. Relocate the base unit away from other electronics (Wi-Fi routers, microwaves). |
| Display is blank | Battery is low or not installed correctly. | Charge the handset for at least 10 hours. Check battery installation. |
Specifications
| Feature | Detail |
|---|---|
| Brand | SPC |
| Model Number | 8436542860437 |
| Telephone Type | Cordless DECT |
| Answering System Type | Digital |
| Batteries Required | 1 x AAAA rechargeable battery |
| Power Source | Battery Powered (Handset), AC Adapter (Base) |
| Item Weight | 11.6 ounces (0.33 Kilograms) |
| Phone Standby Time | 10 hours |
| Caller Identification | Yes |
| Conference Call Capability | 3-way |
| Visible Screen Diagonal | 5 inches / 13 cm |
Warranty and Support
For warranty information and technical support, please refer to the warranty card included with your product or visit the official SPC website. Keep your purchase receipt as proof of purchase.
For further assistance, you may contact SPC customer service through their official channels. Please have your model number (8436542860437) and purchase details ready.
