1. Introduction
This manual provides essential instructions for the safe and effective use of your SPA4PIEDS Collapsible Foot Spa. Please read all instructions carefully before operation.
Image 1: The SPA4PIEDS Collapsible Foot Spa in operation, showing bubbles, red light, and the control panel.
2. Safety Information
The SPA4PIEDS foot spa is built with a safety-first, water-isolated design and carries both ELT and CE certifications. To ensure safe operation, observe the following:
- Do not use without water.
- Ensure the power cord is connected securely.
- The temperature near the heater and water outlet may become high during heating.
- Avoid placing your feet too close to the heater or water outlet.
- Keep out of reach of children.
- Do not stand in the foot spa.
3. Package Contents
Verify that all items are present in the package:
- Collapsible Foot Spa Unit
- 8 Shiatsu Massage Rollers (integrated)
- Removable Pumice Stone
- Power Cord
- Instruction Manual
4. Setup
- Unfold the Foot Spa: Place the collapsed foot spa on a flat, stable surface. Gently push down on the base and pull up the sides until the unit is fully expanded.
- Position the Support Rod: Locate the central support rod. Push it up and lock it into place to provide stability for the unit.
- Fill with Water: Fill the spa bath with warm water up to the desired level. Do not exceed the maximum fill line.
- Connect Power: Connect the power cord to the foot spa and then plug it into a suitable electrical outlet.
Image 2: The foot spa's foldable design allows for compact storage and easy setup.
Video 1: A short demonstration of the foot spa's space-saving foldable design.
5. Operating Instructions
The foot spa features an intuitive control panel for a customized experience.
Image 3: The control panel with buttons for temperature, timer, on/off, red light, and bubbles.
- Power On/Off: Press the ON/OFF button to activate or deactivate the unit.
- Temperature Control: Use the TEMP+ and TEMP- buttons to adjust the water temperature between 95°F and 118°F. The unit will maintain the selected temperature.
- Bubble Function: Press the BUBBLE button to activate the revitalizing bubble massage. Press again to turn off.
- Red Light Therapy: Press the RED LIGHT button to turn on the gentle red light feature. Press again to turn off.
- Timer Setting: Press the TIMER button to set the duration of your foot spa session. Available settings typically include 10, 20, 30, 40, 50, and 60 minutes.
- Shiatsu Massage Rollers: The foot spa includes 8 non-automatic shiatsu massage rollers. Gently move your feet over these rollers to knead tension from the soles.
- Pumice Stone: A removable pumice stone is provided for exfoliating rough skin. Use it while soaking your feet for a complete pedicure experience.
Image 4: Precise temperature control allows adjustment between 95°F and 118°F.
Image 5: The 8 non-automatic massage rollers provide shiatsu-style relief.
Image 6: The included pumice stone can be used for exfoliation on various parts of the foot.
Video 2: A full demonstration and review of the SPA4PIEDS Foot Spa's features and operation.
Video 3: A quick 30-second guide to mastering the SPA4PIEDS Foot Spa Bath.
Video 4: An overview of the SPA4PIEDS Foot Spa Bath Massager with Heat.
6. Maintenance and Cleaning
Regular cleaning ensures hygiene and extends the life of your foot spa.
- Drain Water: After each use, unplug the power cord. Locate the drain plug at the bottom of the unit and open it to release the water.
- Clean the Interior: Wipe the interior of the foot spa with a soft cloth and mild soap. Rinse thoroughly with clean water.
- Dry Completely: Allow the foot spa to air dry completely before collapsing and storing.
- Pumice Stone Care: Rinse the pumice stone after each use and allow it to dry.
7. Storage
The collapsible design makes storage convenient.
- Collapse the Unit: Once dry, unlock the central support rod and gently push the sides of the foot spa inwards until it is fully collapsed.
- Store Flat: The lightweight, flat-folding design allows it to be stored under a bed, sofa, or on a closet shelf.
Image 7: The foot spa collapses to a compact size for easy storage.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on | Not plugged in; Power outlet issue; Unit not expanded correctly. | Ensure power cord is securely plugged in. Try a different outlet. Fully expand the unit and ensure support rod is locked. |
| Water not heating | Temperature setting too low; Insufficient time for heating. | Increase temperature setting. Allow 5-15 minutes for water to reach desired temperature. Starting with warm tap water can expedite heating. |
| Bubbles not working | Bubble function not activated. | Press the BUBBLE button on the control panel. |
9. Specifications
- Model Number: SPA02-000
- Brand: SPA4PIEDS
- Product Dimensions: 16.3 x 13.7 x 8 inches
- Item Weight: 3.2 Pounds (1.45 Kilograms)
- Power Source: Corded Electric
- Material: Stone (referring to pumice stone, main unit is plastic/silicone)
- Temperature Range: 95°F - 118°F
- Timer Settings: Up to 60 minutes
10. Warranty and Support
The SPA4PIEDS foot spa is built with quality and safety in mind. For any issues or support, please refer to the contact information provided with your purchase documentation.
Protection plans are available for purchase separately to extend coverage for 2 or 3 years.
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.