LukLoy Fixed Glass Support Bracket Stabilizer Brace (Left-Side, Matte Black) - Installation Manual

1. Introduction

This manual provides comprehensive instructions for the safe and correct installation, operation, and maintenance of the LukLoy Fixed Glass Support Bracket Stabilizer Brace. This L-shaped bracket is designed to provide stability and support for frameless shower glass panels, connecting the glass to a wall without requiring drilling into the glass itself. Please read this manual thoroughly before installation to ensure proper setup and long-term performance.

2. Product Features

• Reliable Stabilization: Produced with integrated molding for a solid and dependable structure, ensuring shower glass panel stability.
• Easy DIY Installation: Designed for straightforward installation without the need to drill holes in the shower glass or perform extensive pre-work.
• Premium Quality Material: Constructed from high-quality stainless steel with a matte black finish, complementing modern bathroom aesthetics.
• Versatile Glass Compatibility: The U-channel measures 12.5mm wide and is compatible with glass thicknesses of 8mm, 10mm, 12mm, 5/16", 3/8", and 15/32". For 12mm glass, non-corrosive glass glue should be used instead of the included rubber gaskets.
• Space-Saving Design: The L-shaped design connects the wall and glass at the corner, optimizing bathroom space and enhancing safety for frameless shower panels.

3. Package Contents

Please verify that all components are present before beginning installation:

• 1 x LukLoy Fixed Glass Support Bracket (Matte Black, Left-Side)
• Mounting Screws
• Wall Anchors
• Rubber Gaskets (for glass protection)
• Hex Key (Allen wrench)

This image displays the LukLoy fixed glass support bracket, highlighting its dimensions of 240mm (9.45 inches) in length and 85mm (3.35 inches) in width. Also shown are the included mounting screws, wall anchors, and a rubber gasket for glass protection.

This image shows two LukLoy fixed glass support brackets, illustrating the product's design and finish.

4. Safety Information

Please observe the following safety precautions during installation and use:

• Always wear appropriate safety gear, including safety glasses, during installation.
• Ensure the mounting surface (wall) is structurally sound and capable of supporting the weight and forces exerted by the glass panel.
• Use the correct tools and follow all steps carefully.
• Handle glass panels with extreme care to prevent breakage and injury.
• If installing 12mm glass, use non-corrosive glass glue instead of rubber gaskets for a secure fit.
• Do not overtighten screws, as this can damage the bracket or mounting surface.

5. Setup and Installation

5.1 Tools Required (Not Included)

• Pencil or Marker
• Measuring Tape
• Drill with appropriate drill bit for wall anchors
• Screwdriver (Phillips head recommended)
• Level
• Non-corrosive glass glue (for 12mm glass)

5.2 Installation Steps

1. Determine Placement: Position the glass panel and the bracket on the wall to determine the desired mounting location. Use a level to ensure the bracket will be installed straight. Mark the screw hole positions on the wall using a pencil.
2. Drill Pilot Holes: Using an appropriate drill bit for your wall type and the provided wall anchors, drill pilot holes at the marked locations.
3. Insert Wall Anchors: Gently tap the wall anchors into the drilled holes until they are flush with the wall surface.
4. Mount the Bracket: Align the bracket with the wall anchors. Insert the mounting screws through the bracket's holes and into the wall anchors. Tighten the screws securely with a screwdriver. Do not overtighten.


An example of the LukLoy fixed glass support bracket correctly installed on a tiled wall, providing stability to a frameless glass shower panel. The bracket is positioned at the top edge of the glass.

5. Prepare for Glass Insertion: If your glass is 8mm, 10mm, or 5/16", 3/8", 15/32" thick, insert the rubber gaskets into the U-channel of the bracket to protect the glass and ensure a snug fit. If your glass is 12mm thick, apply non-corrosive glass glue inside the U-channel instead of using gaskets.


A detailed view of the L-shaped glass bracket, highlighting the U-channel designed to hold the glass panel and the pre-drilled holes for wall mounting. This image also shows the matte black finish.

6. Insert Glass Panel: Carefully slide the frameless glass panel into the U-channel of the mounted bracket. Ensure the glass is fully seated and level.

This image shows a glass panel securely held within the U-channel of the LukLoy bracket, illustrating the design that eliminates the need to drill holes directly into the shower glass for installation.
7. Final Check: Verify that the glass panel is stable and secure. Gently push on the glass to confirm there is no excessive wobble.

This image illustrates a complete shower enclosure where the LukLoy fixed glass support bracket is integrated, demonstrating its role in securing a frameless glass shower panel within a modern bathroom setting.

6. Operation

Once installed, the LukLoy Fixed Glass Support Bracket operates passively by providing continuous structural support to your frameless shower glass panel. No active operation is required. Ensure the glass remains firmly seated within the bracket's U-channel.

7. Maintenance

To ensure the longevity and appearance of your LukLoy Fixed Glass Support Bracket, follow these maintenance guidelines:

• Cleaning: Clean the bracket regularly with a soft cloth and mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive pads, which can damage the matte black finish.
• Inspection: Periodically check all mounting screws to ensure they remain tight. Inspect the glass panel within the bracket for any signs of movement or damage.
• Gasket/Glue Integrity: If rubber gaskets were used, ensure they are still providing a snug fit. If glass glue was used, check for any signs of degradation or separation.

8. Troubleshooting

9. Specifications

10. Warranty and Support

For warranty information or technical support regarding your LukLoy Fixed Glass Support Bracket, please refer to the product packaging or contact LukLoy customer service directly. Keep your purchase receipt for warranty claims.