e-vibra Waterproof Vibrating Alarm Watch Instruction Manual

1. Introduction

The e-vibra vibrating watch is designed to provide convenient and discreet reminders throughout the day. Its silent vibration feature is ideal for various uses, including potty training, medication reminders, hydration alerts, and maintaining a daily schedule without disturbing others.

This stylish watch features a slim, lightweight, and soft silicone wristband, ensuring comfort and ease of use. It is waterproof for daily activities and includes a lock screen function to prevent accidental changes to settings.

Figure 1: Front view of the e-vibra Waterproof Vibrating Alarm Watch.

2. Key Features

• Timer Function: Set programmable loop timers for intervals such as 1, 5, 10, 15, 20, 30, 45, 60, 90, 120 minutes, or 3 hours. The watch provides auto-repeatable vibrations for timely reminders.
• Multiple Alarm Settings: Configure up to 15 distinct alarms for specific times (e.g., 8:00 AM, 1:40 PM, 11:50 PM). These silent, strong vibrations are perfect for discreet reminders without disturbing others.
• Lock Screen & Mute On: The lock screen feature prevents unintended alterations to time and alarm settings. The mute function allows temporary deactivation of all set alarms.
• Water Resistant: Designed for water activities like showering, but not suitable for underwater activities such as diving.
• Rechargeable with Power-Off Memory: Saves all alarm settings permanently, eliminating the need for resetting after power loss. Features a direct USB-A charging connector, requiring no additional cable. A full charge lasts approximately 6 to 40 days.

3. Setup

3.1. Charging the Watch

To charge your e-vibra watch, carefully remove the watch face from its silicone wristband. Locate the built-in USB-A connector on the watch face. Plug this connector directly into any standard USB-A port, such as on a laptop, power bank, or wall adapter. No additional charging cable is required. A blue indicator light will illuminate during charging.

Figure 2: Charging the watch via a USB-A port.

Figure 3: Visual guide for connecting the watch to a USB power source.

For a visual demonstration of charging and initial setup, please refer to the video below:

3.2. Time Setting

To set the current time on your watch, press and hold the main button until the time display begins to flash. Use the side buttons to adjust the hours and minutes. Press the main button again to confirm each setting. The watch supports both 12-hour (AM/PM) and 24-hour formats.

Refer to the video below for a step-by-step guide on setting the time:

4. Operating Instructions

4.1. Alarm Setting

The watch allows setting up to 15 vibrating alarms. To set an alarm, navigate to the alarm setting mode by pressing the main button repeatedly until 'ALM' appears. Press and hold the main button until the alarm time flashes. Use the side buttons to adjust the desired alarm hour and minute, confirming each with a short press of the main button. An alarm icon will appear on the screen when an alarm is active.

For detailed alarm setting instructions, watch the video below:

4.2. Timer Function

The timer function provides repeatable vibration reminders at set intervals. To activate, navigate to the timer mode by pressing the main button until 'TMR' appears. Press and hold the main button to enter timer setup. Use the side buttons to select your desired interval (e.g., 1, 5, 10, 15, 20, 30, 45, 60, 90, 120 minutes, or 3 hours). Confirm your selection with the main button. The timer will begin counting down and repeat the vibration at the chosen interval.

A visual guide for setting the timer is available in the video below:

4.3. Lock Screen and Mute On

To prevent accidental changes to settings, activate the lock screen feature. This will disable button input until unlocked. To temporarily deactivate all alarms without deleting them, use the mute function. Consult the watch's on-screen indicators for lock and mute status.

Learn more about the lock screen feature in this video:

5. Maintenance

5.1. Water Resistance

The e-vibra watch is designed to be water resistant, allowing for use during activities like showering. However, it is not intended for prolonged underwater activities such as swimming or diving. Avoid pressing buttons while the watch is submerged to prevent water ingress.

Figure 4: The watch demonstrating water resistance.

5.2. Cleaning

To clean your watch, gently wipe the silicone band and watch face with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials, as these may damage the watch's finish or functionality.

6. Troubleshooting

• Watch not turning on or displaying: Ensure the watch is fully charged. Connect it to a USB power source as described in the Charging section. If the issue persists, try pressing and holding the main button for several seconds to reset.
• Vibration not working: Check if the mute function is active. Deactivate mute if necessary. Ensure alarms or timers are correctly set and enabled.
• Settings changing unexpectedly: Verify that the lock screen feature is enabled to prevent accidental button presses.
• Inaccurate time: Re-set the time following the Time Setting instructions.
• Short battery life: Battery life can vary based on usage (e.g., frequent alarms). Ensure the watch is fully charged. If battery life remains significantly shorter than expected, contact customer support.

7. Specifications

Figure 5: Watch dimensions.

8. Warranty and Support

For warranty information, technical support, or any inquiries regarding your e-vibra Waterproof Vibrating Alarm Watch, please contact the manufacturer directly through their official website or the retailer where the product was purchased. Please retain your proof of purchase for warranty claims.