Parkside Performance 2028 Cordless Reciprocating Saw Instruction Manual

1. Introduction

1.1 Product Overview

The Parkside Performance 2028 Cordless Reciprocating Saw is a powerful and versatile tool designed for efficient cutting in various materials such as wood, plastic, metal, and light building materials. It features a brushless motor for extended lifespan and optimal performance, especially when used with Parkside X 20 V PAPS smart batteries. This device is part of the PARKSIDE X 20 V Team series.

Please note that the battery and charger are not included with this saw and must be purchased separately.

1.2 Intended Use

This reciprocating saw is intended for cutting wood, plastic, metal, and light building materials. It is also suitable for flush cutting. Any other use not expressly approved in this manual may damage the tool and pose a significant risk to the user.

2. Safety Instructions

Always observe general power tool safety warnings and specific safety instructions for reciprocating saws. Failure to follow these warnings and instructions may result in electric shock, fire, and/or serious injury.

2.1 General Power Tool Safety Warnings

• Work Area Safety: Keep work area clean and well lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
• Electrical Safety: Power tool plugs must match the outlet. Never modify the plug in any way. Avoid body contact with earthed or grounded surfaces.
• Personal Safety: Always wear eye protection, hearing protection, and suitable work gloves. Dress properly. Do not wear loose clothing or jewelry. Keep hair and clothing away from moving parts.
• Tool Use and Care: Do not force the power tool. Use the correct power tool for your application. Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.

2.2 Reciprocating Saw Specific Safety Warnings

• Hold the power tool by insulated gripping surfaces when performing an operation where the cutting accessory may contact hidden wiring or its own cord.
• Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body leaves it unstable and may lead to loss of control.
• Always ensure the blade is securely installed before operation.
• Do not touch the blade immediately after use as it may be hot.

3. Product Components and Overview

Familiarize yourself with the components of your reciprocating saw before operation.

Figure 1: Main view of the Parkside Performance 2028 Cordless Reciprocating Saw. This image shows the tool body, blade clamp, and handle, but without the battery attached. The brushless motor housing is visible, along with the trigger and mode selection buttons.

• Blade Clamp / Quick-release chuck
• Saw Blade
• Adjustable Foot Plate
• LED Work Light
• Brushless Motor Housing
• Handle with non-slip soft grip
• Trigger with variable speed control
• Mode/Speed Selector (2 levels)
• Battery Interface (Battery not included)

4. Setup

4.1 Battery Installation

This tool is compatible with all batteries from the PARKSIDE X 20 V Team series. Ensure the battery is fully charged before use.

1. Align the battery pack with the battery interface on the tool.
2. Slide the battery pack into the tool until it clicks into place.
3. To remove, press the battery release button and slide the battery out.

4.2 Installing the Saw Blade

The saw features a quick-release chuck for tool-free blade changes.

Figure 2: Close-up view of hands installing a saw blade into the quick-release chuck of the reciprocating saw. The blade is being inserted into the opening, demonstrating the tool-free blade change mechanism.

1. Ensure the tool is switched off and the battery is removed.
2. Rotate the quick-release chuck collar counter-clockwise and hold it.
3. Insert the saw blade fully into the chuck opening.
4. Release the quick-release chuck collar. The blade should be securely locked in place.
5. Gently pull on the blade to ensure it is properly seated and cannot be easily removed.
6. To remove a blade, repeat steps 2 and 3, then pull the blade out.

5. Operating Instructions

5.1 Basic Operation

Figure 3: A person using the Parkside Performance 2028 Reciprocating Saw to cut through a wooden beam. Sawdust is visible, indicating active cutting. The user is holding the tool firmly with both hands.

1. Ensure the workpiece is securely clamped or held.
2. Select the desired speed level using the mode/speed selector (Level 1: 0-2300 min⁻¹, Level 2: 0-3000 min⁻¹).
3. Place the foot plate firmly against the workpiece.
4. Press the trigger to start the saw. The LED work light will illuminate.
5. Guide the saw smoothly through the material, applying steady pressure. Do not force the tool.
6. Release the trigger to stop the saw.

5.2 Adjusting Cutting Depth

The cutting depth can be varied by adjusting the extendable foot plate. Consult your tool's specific instructions for detailed steps on adjusting the foot plate.

5.3 Smart Battery Features (with Parkside X 20 V PAPS batteries)

When using Parkside X 20 V PAPS smart batteries, you can access enhanced features via the Lidl Home app, including:

• Individual device configuration.
• Monitoring of data such as total working time, stroke rate, real-time display, battery voltage.
• Device settings: stroke rate adjustment, smart battery performance parameters, reset, firmware updates.
• Device recognition by Tool ID.

6. Maintenance

6.1 Cleaning

• Always remove the battery before cleaning.
• Keep the ventilation slots clean to prevent overheating.
• Wipe the tool housing with a soft, damp cloth. Do not use harsh cleaning agents or solvents.
• Remove sawdust and debris from the blade clamp area regularly.

6.2 Blade Care and Replacement

• Inspect saw blades before each use for damage or dullness. Replace worn or damaged blades immediately.
• Use appropriate blades for the material being cut (e.g., wood blade for wood, metal blade for metal).
• Store blades safely to prevent damage and injury.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty claims, technical support, or spare parts, please contact the manufacturer or your point of purchase. Keep your proof of purchase for any warranty-related inquiries.

Manufacturer: PARKSIDE PERFORMANCE®