User Manual

Introduction

This manual provides essential information for the safe and effective use of your E ECSEM 3.3ft Charging Cable, designed specifically for the A-TGTGA CK30 Smart Watch. This product features gold-plated magnetic contacts for stable current transmission and is built for durability and convenience.

Figure 1: E ECSEM 3.3ft Charging Cables (2-pack)

Product Features

• Compatibility: Specifically designed for A-TGTGA CK30 Smart Watch.
• Magnetic Connection: Gold-plated 2-pin magnetic contacts ensure sensitive and stable current transmission.
• Cable Length: Features a 3.3 feet (approximately 1 meter) cord for convenient use.
• Portability: Lightweight and compact design makes it easy to carry.
• Versatile Charging: Can be charged via standard USB Type A ports found on power adapters, car chargers, power banks, laptops, and PCs.
• Durability: Constructed with 20 new pure copper wires to prevent overheating and ensure user safety.
• Pack Quantity: Includes two charging cables for multiple locations or as a spare.

Package Contents

Upon opening the package, you should find the following items:

• 2 x E ECSEM 3.3ft Magnetic USB Charging Cables

Note: The A-TGTGA CK30 Smart Watch is not included with this product.

Setup Guide

Setting up your E ECSEM charging cable is straightforward. Follow these steps to prepare for charging your A-TGTGA CK30 Smart Watch:

1. Unpack the Cables: Carefully remove the charging cables from their packaging.
2. Identify Components: Locate the USB Type A connector on one end and the magnetic 2-pin charging head on the other end of the cable.
3. Connect to Power Source: Insert the USB Type A connector into a compatible USB power source. This can be a USB wall adapter (5V/1A recommended), a computer's USB port, a power bank, or a car charger.


Figure 2: USB-A Connector and Magnetic Charging Head

4. Prepare Smart Watch: Ensure your A-TGTGA CK30 Smart Watch is clean around its charging contacts.

Operating Instructions

Once the cable is connected to a power source, you can begin charging your smart watch:

1. Attach to Smart Watch: Gently bring the magnetic 2-pin charging head of the cable close to the charging contacts on the back of your A-TGTGA CK30 Smart Watch. The magnetic force will automatically align and secure the connector.


Figure 3: Magnetic Charging Head Contacts

2. Verify Connection: Ensure the magnetic connection is firm and stable. The smart watch display should indicate that it is charging (e.g., a charging icon or battery percentage increase).
3. Charging Time: Charging time will vary depending on the smart watch's battery level and the power output of your USB source. Avoid leaving the watch connected for extended periods after it is fully charged.
4. Disconnecting: To disconnect, gently pull the magnetic charging head away from the smart watch. Then, unplug the USB Type A connector from the power source.

Maintenance and Care

Proper care will extend the life of your charging cable:

• Storage: When not in use, store the cable in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly coiling or kinking the cable, especially near the connectors.
• Cleaning: If the magnetic contacts or USB connector become dirty, gently wipe them with a soft, dry, lint-free cloth. Do not use liquids or abrasive cleaners.
• Handling: Always grasp the connector ends when plugging or unplugging the cable. Avoid pulling on the cable itself, as this can damage the internal wires.
• Avoid Water: This cable is not waterproof. Keep it away from water and other liquids to prevent damage.

Troubleshooting

If you encounter issues while using your charging cable, try the following solutions:

• Smart Watch Not Charging:
  • Ensure the USB Type A connector is fully inserted into a working power source.
  • Verify that the magnetic charging head is correctly aligned and firmly attached to the smart watch's charging contacts. The magnets should snap into place.
  • Check if the smart watch's charging contacts are clean and free of debris.
  • Try a different USB power source (e.g., a different wall adapter or a different USB port on your computer).
  • Test with the second cable provided in the pack, if applicable, to rule out a faulty cable.
• Slow Charging:
  • Ensure your USB power source provides sufficient current (e.g., a 5V/1A wall adapter is generally faster than a computer's USB 2.0 port).
  • Avoid using USB hubs or unpowered USB ports, which may deliver insufficient power.
• Cable Overheating:
  • While the cable is designed to prevent overheating, if you notice excessive heat, immediately disconnect it from the power source and the smart watch.
  • Ensure you are using a compatible power source.
  • If overheating persists, discontinue use and contact customer support.

Specifications

Warranty and Support

E ECSEM is committed to providing high-quality products and excellent customer service. All E ECSEM products undergo thorough quality checks before shipment.

If you receive a defective item or experience any quality-related issues, please contact our customer support team immediately. We are responsible for all quality-related concerns and will do our best to provide prompt assistance and resolution.

For support, please refer to the contact information provided with your purchase or visit the official E ECSEM store on Amazon: E ECSEM Amazon Store.