AQUAFYSH AC30
AQUAFYSH AC30 Cordless Rechargeable Pool Cleaner User Manual
Model: AC30 | Brand: AQUAFYSH
1. Introduction
Thank you for choosing the AQUAFYSH AC30 Cordless Rechargeable Pool Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read it thoroughly before use and retain it for future reference.
2. Safety Instructions
- Read all instructions carefully before operating the cleaner.
- Do not operate the cleaner out of water.
- Ensure the charging port is dry before connecting the charger.
- Keep children and pets away from the pool area during operation.
- Use only the provided charger and accessories.
- Do not attempt to disassemble or repair the cleaner yourself. Contact customer support for assistance.
- Store the cleaner in a cool, dry place when not in use.
3. Package Contents
Verify that all components are present in the package:
- Main Cleaner Unit
- 5.9-foot Adjustable Attachable Pole (in 5 sections)
- Rolling Vacuum Head
- Large Brush Vacuum Head
- Charger with USB Cable
- 3 Fine Mesh Filters
- 2 Oil Sponges (for spas and hot tubs)
- User Manual

4. Setup and Assembly
4.1 Assembling the Pole
- Connect the 5 pole sections by aligning the pins and holes, then twisting to secure.
- Attach the assembled pole to the main cleaner unit. Ensure it clicks into place securely.

4.2 Attaching the Cleaning Head
Choose the appropriate cleaning head for your task:
- Rolling Vacuum Head: Ideal for collecting leaves and small stones.
- Large Brush Vacuum Head: Suitable for cleaning moss and fine sands.
Align the chosen head with the bottom of the main cleaner unit and push until it locks into place.

5. Charging the Battery
The AQUAFYSH AC30 is powered by a 3.6V Lithium-Ion battery (7.92 Wh). Before first use, fully charge the device.
- Ensure the cleaner is turned off and the charging port is dry.
- Connect the USB cable to the charger and then to the charging port on the cleaner.
- Plug the charger into a standard electrical outlet.
- The LED indicator will show red during charging and turn blue when fully charged.
- A full charge takes approximately 3-4 hours.

6. Operating Instructions
6.1 Powering On/Off
The cleaner features a touch control method. Locate the power button on the main unit. Press to turn on, and press again to turn off.
6.2 Cleaning Your Pool
The AQUAFYSH AC30 is designed for above-ground pools, hot tubs, and spas. It offers a maximum flow rate of 1.5m³/h and can run for up to 60 minutes on a full charge.
- Ensure the cleaner is fully charged and the desired cleaning head is attached.
- Submerge the cleaner into the water.
- Turn on the cleaner using the power button.
- Slowly guide the cleaner across the pool surface or floor to collect debris.
- The large capacity waste bin (1L) collects debris such as leaves, sand, and small particles.
- After cleaning, turn off the cleaner and remove it from the water.


6.3 Magnetic Drive Technology
The AQUAFYSH AC30 utilizes a magnetic drive design, eliminating traditional physical seals. This design reduces wear and tear, minimizes maintenance, and enhances efficiency by lowering friction and energy consumption.

6.4 Video: How Magnetic Drive Works
6.5 Video: Handheld Pool Vacuum in Daily Cleaning
7. Maintenance
7.1 Cleaning the Waste Bin and Filter
Regularly empty and clean the 1L waste bin and fine mesh filters to maintain optimal suction and performance.
- Turn off the cleaner and remove it from the water.
- Detach the waste bin section.
- Remove the fine mesh filter from the bin.
- Empty any collected debris from the bin.
- Rinse the waste bin and filter thoroughly with clean water.
- Ensure all parts are dry before reassembling.

7.2 Using Oil Sponges
For spas and hot tubs, the included oil sponges can be used to absorb oils and scum from the water. Place the oil sponges within the waste bin or filter area as directed by the product packaging.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Cleaner does not turn on. | Battery is not charged. | Charge the cleaner fully (refer to Section 5). |
| Power button malfunction. | Ensure the power button is pressed firmly. If issue persists, contact support. | |
| Reduced suction power. | Waste bin is full. | Empty the waste bin (refer to Section 7.1). |
| Filter is clogged. | Clean the fine mesh filter thoroughly (refer to Section 7.1). | |
| Debris stuck in the intake. | Turn off the cleaner and carefully remove any obstructions from the cleaning head. | |
| Cleaner stops unexpectedly. | Battery is depleted. | Recharge the cleaner. |
| Overheating. | Remove the cleaner from water and allow it to cool down before resuming operation. | |
| Physical damage to components (e.g., clips). | Wear and tear or accidental damage. | Contact AQUAFYSH customer support for replacement parts or warranty claims. |
9. Specifications
| Feature | Detail |
|---|---|
| Model Name | AC30 |
| Special Feature | Portable |
| Control Method | Touch |
| Power Source | Battery Powered |
| Battery Type | 1 Lithium Ion battery required (3.6 Volts, 7.92 Watt Hours) |
| Charging Time | 3-4 Hours |
| Max. Cleaning Cycle | 60 minutes |
| Max. Flow Rate | 1.5 m³/h |
| Max. Filter Precision | 180 µm |
| Debris Basket Capacity | 1 L |
| Waterproof Level | IPX8 |
| Item Weight | 2.8 pounds |
| Product Dimensions | 17.4 x 6 x 13 inches |
| Assembly Required | Yes |

10. Warranty Information
The AQUAFYSH AC30 Pool Cleaner comes with a limited warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your product packaging or contact AQUAFYSH customer support.
11. Customer Support
If you have any questions, require assistance with setup or operation, or need to report an issue, please contact AQUAFYSH customer support. Our team is available to provide prompt solutions.
For assistance, please refer to the contact information provided on the product packaging or the official AQUAFYSH website.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.