Accutime Super Mario Light-Up Digital Watch (Model GSM4198AZ) User Manual

1. Introduction

Thank you for choosing the Accutime Super Mario Light-Up Digital Watch. This officially licensed timepiece is designed for children and features a clear digital display and an exciting LED light-up function. This manual provides essential information to ensure proper use and care of your watch.

2. Safety Information

Please read all safety warnings before use.

• CHOKING HAZARD: Contains small parts. Not suitable for children under 3 years.
• This product is NOT A TOY.
• The watch contains a mercury-free battery. Do not dispose of batteries in fire; batteries may explode or leak.
• Do not attempt to replace the battery yourself. Send the watch to a service center for battery replacement.
• The watch is NOT WATER-RESISTANT. Discontinue use if immersed in water.
• Do not wear the watch if the case back is missing or disassembled.
• Recommended for ages 6 and up.

3. Package Contents

• Accutime Super Mario Light-Up Digital Watch (Model GSM4198AZ)
• Decorative Super Mario Tin Case

4. Product Overview

The Accutime Super Mario Digital Watch features a vibrant design with Super Mario characters and a clear LCD digital display. It includes three control buttons located on the right side of the watch case.

Image 4.1: Front view of the Accutime Super Mario Digital Watch, showing Mario jumping and the digital time "6:27". The watch has a red bezel and a blue strap with yellow question mark blocks.

Image 4.2: Side profile of the Accutime Super Mario Digital Watch, showing the thickness of the watch case and the blue strap. Three red buttons are visible on the right side of the watch case.

Button Functions:

• Top Button: Activates the LED light-up function.
• Middle Button (Mode): Cycles through display modes (Time, Date) and enters setting mode.
• Bottom Button (Set/Adjust): Adjusts values when in setting mode.

5. Setup: Setting Time and Date

To set the time and date on your digital watch, follow these steps:

1. From the normal time display, press the Middle Button (Mode) repeatedly until the hour digits begin to flash. This indicates you are in setting mode.
2. While the hour digits are flashing, press the Bottom Button (Set/Adjust) to advance the hour. Pressing it once will increase the hour by one.
3. Press the Middle Button (Mode) again to move to the minute digits. The minute digits will begin to flash.
4. Press the Bottom Button (Set/Adjust) to advance the minutes.
5. Continue pressing the Middle Button (Mode) to cycle through other settings such as month, day, and year, adjusting each with the Bottom Button (Set/Adjust) as needed.
6. Once all settings are correct, press the Middle Button (Mode) one last time to exit setting mode and return to the normal time display.

6. Operating the Watch

Viewing Time and Date:

In normal operating mode, the watch displays the current time. Press the Middle Button (Mode) once to view the date (month and day). Press it again to return to the time display.

Using the Light-Up Function:

To activate the multi-color LED light-up function, press the Top Button. The lights will illuminate the watch face for a few seconds, then automatically turn off.

7. Maintenance

Cleaning:

To clean your watch, gently wipe it with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials, as these can damage the watch's finish or display.

Battery Information:

The watch is powered by a pre-installed, mercury-free battery. This battery is not user-replaceable. If the watch stops functioning, please refer to the Warranty and Support section for service options. Attempting to replace the battery yourself may damage the watch and void the warranty.

Water Exposure:

This watch is not water-resistant. Avoid exposing it to water, including rain, splashes, or immersion. Water damage is not covered under warranty.

8. Troubleshooting

• Display is blank or flickering: The battery may be low or depleted. Contact customer support for service.
• Time is incorrect: Refer to Section 5, "Setup: Setting Time and Date," to reset the time.
• Light-up function not working: Ensure the Top Button is pressed firmly. If it still does not work, the battery may be low, or there may be an internal issue. Contact customer support.
• Buttons are unresponsive: Check for any debris or obstruction around the buttons. If the issue persists, contact customer support.

9. Specifications

• Model Number: GSM4198AZ
• Manufacturer: Accutime Watch Corp.
• Department: Girls (suitable for children aged 6 and up)
• Package Dimensions: 3.19 x 3.03 x 3.03 inches
• Item Weight: 1 ounce
• First Available Date: March 28, 2023

Image 9.1: Close-up of the warning label on the back of the watch's tin case, detailing safety information, choking hazards, battery warnings, and manufacturer details.

10. Warranty and Support

Warranty:

Your Accutime Super Mario Light-Up Digital Watch is covered by a One-Year Warranty from the date of purchase. This warranty covers manufacturing defects. It does not cover damage resulting from misuse, accidents, unauthorized repairs, or water exposure.

Customer Support:

For warranty claims, technical assistance, or battery replacement services, please contact Accutime Watch Corp. at the following address:

Please retain your proof of purchase for warranty validation.