Allewie King Size Lift Up Storage Bed Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Allewie King Size Lift Up Storage Bed. Please read all instructions carefully before beginning assembly or use to ensure proper function and safety. This bed frame features a button-tufted wingback headboard, hydraulic lift support for underbed storage, and does not require a box spring.

Safety Information

Important Safety Warnings:

• Be cautious when operating the gas lift mechanism to avoid injury.
• Ensure the bed frame is properly assembled to prevent instability.
• Always follow the care instructions to maintain the product's condition and safety.
• Keep children and pets away from the bed frame during assembly and operation of the lift mechanism.
• Do not exceed the maximum weight capacity of 800 pounds for the bed frame or 136 pounds for the lifting mechanism.

Package Contents

Your Allewie King Size Lift Up Storage Bed is packaged efficiently in one box. Please verify all components are present before beginning assembly.

• Bed Frame components
• Headboard
• Hydraulic Lift bars (Gas Lift Mechanism)
• Wooden Slats
• Assembly Hardware (bolts, washers, nuts)
• Assembly Tools (Allen wrench, etc.)
• Detailed Instruction Book

Specifications

For detailed dimensions, refer to the diagram below:

Setup (Assembly Instructions)

Assembly typically takes 1.5 to 3 hours with two people. A power drill with appropriate bits (e.g., S2 3/16" drill bit and a 13 mm socket) can expedite the process, though manual tools are provided. Follow the step-by-step instructions in the included instruction book.

Key Assembly Points:

• Organize all parts and hardware before starting. Each component is labeled.
• Ensure the hydraulic lift bars are installed correctly and securely. They may require significant force to compress before a mattress is placed on the frame.
• Attach the decorative side panels after connecting the bed sides to the headboard for easier access.
• Verify all bolts and connections are tightened securely to ensure stability and prevent squeaking.

Assembly Visual Aids:

Assembly Video Resources:

Operating the Lift-Up Storage

The Allewie Lift Up Storage Bed features a hydraulic mechanism designed for easy access to underbed storage. Follow these steps to operate the lift function:

To Lift the Bed:

1. Remove all pillows and loose bedding from the mattress surface.
2. Locate the fabric pull handle typically positioned at the foot end of the bed frame.
3. Firmly grasp the handle and lift the mattress platform upwards. The hydraulic mechanism will assist in lifting and holding the platform in an open position.
4. Ensure the platform is fully raised and stable before accessing the storage area.

To Lower the Bed:

1. Ensure no items are obstructing the closing mechanism within the storage area.
2. Grasp the pull handle and gently pull the mattress platform downwards. Apply steady, even pressure. The hydraulic mechanism will provide resistance for a controlled descent.
3. Continue to lower until the platform rests securely on the bed frame.

Storage Capacity:

The underbed storage area provides approximately 10.8 inches of height, suitable for storing various items such as:

• 10+ Storage Boxes
• 10+ Quilts/Blankets
• 20+ Pairs of Shoes
• 4+ Luggage Cases

Operation Video Resources:

Maintenance

Proper maintenance ensures the longevity and optimal performance of your bed frame.

• Cleaning: Wipe the upholstered fabric with a dry cloth to remove dust and light debris. Avoid using harsh chemicals or abrasive cleaners, as these can damage the fabric.
• Inspections: Periodically check all bolts and connections to ensure they remain tight. Re-tighten any loose hardware to maintain stability and prevent squeaking.
• Hydraulic Mechanism: The hydraulic lift bars are designed for durability. If you notice any issues with lifting or lowering, ensure there are no obstructions. Do not attempt to disassemble or repair the hydraulic mechanism yourself; contact customer support if issues persist.
• Slats: Ensure the wooden slats are properly seated in their holders. Replace any damaged slats promptly to maintain mattress support.

Troubleshooting

Bed Frame Not Lifting/Lowering Smoothly:

• Check for Obstructions: Ensure no items are caught in the lifting mechanism or preventing the platform from moving freely.
• Hydraulic Installation: Verify that the hydraulic lift bars are installed correctly according to the assembly instructions. Incorrect installation can hinder operation.
• Initial Stiffness: New hydraulic mechanisms can be stiff and require some weight (like a mattress) to operate smoothly. If the bed is empty, it may be difficult to push down.

Squeaking Noises:

• Tighten Hardware: Most squeaking issues are resolved by tightening all bolts and connections on the bed frame.
• Check Slats: Ensure all wooden slats are properly seated and not rubbing against the frame.

Bed Frame Feels Unstable:

• Verify Assembly: Double-check all assembly steps to ensure every component is correctly installed and all hardware is securely tightened.
• Level Surface: Ensure the bed frame is placed on a flat, level surface. Uneven flooring can cause instability.

Warranty and Support

For warranty information, product support, or to order replacement parts, please contact Allewie customer service. Refer to your purchase documentation for specific warranty terms and contact details.

You can also visit the official Allewie store for more information: Allewie Store on Amazon