1. Introduction
Thank you for choosing KEMIMOTO E24 Approved Motorcycle Bar End Mirrors. These mirrors are designed to provide a wide, clear field of vision and enhance safety during your rides. This manual contains important information regarding the installation, operation, and maintenance of your new mirrors. Please read it thoroughly before installation and keep it for future reference.
These mirrors are universally designed for motorcycles, street bikes, ATVs, dirt bikes, BMX bikes, and scooters with 7/8" (22mm) handlebars and an internal tube diameter of 13 to 19 mm.
2. Safety Information
- Always ensure all components are securely fastened before riding. Loose mirrors can cause distraction or detachment, leading to hazardous situations.
- Regularly inspect mirrors for damage, cracks, or loose fittings. Replace damaged mirrors immediately.
- Ensure mirrors are adjusted correctly to provide the best possible rearward visibility for your riding position.
- Be aware that convex mirrors make objects appear smaller and further away than they actually are. Exercise caution when judging distances.
3. Package Contents
The package includes the following items:
- 2 x KEMIMOTO Motorcycle Bar End Mirrors
Note: Only M8 screws are included in the mirror package. If your motorcycle handlebar requires M6 threaded screws, these mirrors are not compatible. Please verify your handlebar's thread size before installation.
4. Setup and Installation
Please verify your handlebar type before proceeding with installation. These mirrors are designed for 7/8" (22mm) handlebars with an internal tube diameter of 13 to 19 mm.
Figure 4.1: Visual guide for mirror installation based on handlebar type and internal diameter.
- For Hollow Handlebars: Remove the existing bar end from your handlebar. Mount the mirror directly using the original handlebar end cap.
- For Threaded Handlebars: Use the included M8 screws for direct mounting. The package contains M8 screws.
- For Handlebars with 13-16 mm Internal Diameter: Use the spacer provided along with one expansion bolt.
- For Handlebars with 17-19 mm Internal Diameter: Use the spacer provided along with two expansion bolts.
Ensure all bolts are tightened securely to prevent movement during operation. Do not overtighten.
5. Operation
The KEMIMOTO bar end mirrors are designed for optimal adjustability and clear vision.
5.1. 360° Rotation
The mirror base features a fully 360-degree rotatable design, allowing you to adjust the mirror to any desired angle. This flexibility helps in achieving the best possible rearward view for your specific riding posture and preferences.
Figure 5.1: Illustration of the 360-degree rotation capability for optimal viewing angles.
5.2. Clear Vision
Equipped with convex glass, these mirrors provide a wide, high-definition field of view. This design helps to minimize blind spots, allowing you to clearly see oncoming vehicles and obstacles behind you, contributing to a safer riding experience.
6. Maintenance
To ensure the longevity and optimal performance of your KEMIMOTO mirrors, follow these maintenance guidelines:
- Cleaning: Clean the mirror surfaces regularly with a soft cloth and a mild glass cleaner. Avoid abrasive materials or harsh chemicals that could scratch the glass or damage the mirror housing.
- Inspection: Periodically check all mounting bolts and adjustment points for tightness. Vibrations from riding can cause components to loosen over time.
- Storage: If storing your motorcycle for an extended period, ensure the mirrors are clean and protected from extreme temperatures or direct sunlight.
7. Troubleshooting
- Mirror Vibration: If mirrors vibrate excessively at speed, re-check all mounting bolts for tightness. Ensure the handlebar's internal diameter matches the recommended range (13-19mm) and that the correct expansion bolts/spacers are used.
- Poor Visibility: Adjust the mirror angle using the 360° rotation feature to find the optimal viewing position. Ensure the mirror surface is clean and free from obstructions.
- Incompatibility: These mirrors are not suitable for M6 threaded handlebars or specific models like MT-07/MT09 (2013-2020)/MT10/MT01/MT125/XSR700/XSR900 (2016-2021)/Niken/TMAX/FZ07/FZ09/FZ10/FZ1/FZ6/XJ6/XJR1300/XJR1200/XJ900/SMAX/YZF-R125/Speed Twin900/Street Triple/BMW1000R/CBR1000R. If you own one of these models or have an M6 handlebar, these mirrors will not fit.
8. Specifications
Detailed specifications for the KEMIMOTO E24 Approved Motorcycle Bar End Mirrors:
Figure 8.1: Product dimensions of the KEMIMOTO Bar End Mirrors.
Figure 8.2: E24 approval marking on the mirror, ensuring compliance with European standards.
| Feature | Specification |
|---|---|
| Brand | KEMIMOTO |
| Model Number | F0804-01701 |
| Item Dimensions (LxWxH) | 12.3 x 8.6 x 25 cm |
| Material | Durable Metal Alloy |
| Color | Black |
| Mounting Type | Handlebar Mount |
| Vehicle Service Type | ATV, Motorcycle |
| Fit Type | Universal (for 7/8" / 22mm handlebars with 13-19mm internal diameter) |
| Special Features | Wide field of view, 360-degree adjustable, convex lens |
| Lens Curvature | Aspherical |
| Operation Mode | Manual |
| Certification | E24 Approved |
| Country of Origin | China |
9. Warranty and Support
KEMIMOTO products are manufactured to high-quality standards. For any questions, technical assistance, or warranty claims, please contact KEMIMOTO customer support through the retailer where the product was purchased. Please retain your proof of purchase for warranty purposes.
