1. Product Overview
The Ideal Standard Alu+ shower bar, model BD586XG, is designed for a modern and eco-responsible bathroom experience. This Silk Black shower bar combines aesthetic appeal with practical features, including integrated storage and water-saving technology.
Key features include:
- Durable Design: Constructed from 84% recycled aluminum, free from chrome, nickel, and lead.
- Environmental Responsibility: Features an EcoFlow regulator for water and energy savings.
- Convenient Storage: Equipped with easily adjustable integrated shelves.
- Personalized Shower: Includes a 100 mm hand shower with multiple spray modes.
- Easy to Clean: Designed for quick and effortless limescale removal.
2. Package Contents
Verify that all components are present before beginning installation:
- Shower Bar
- Adjustable Shelves
- Hand Shower (100 mm)
- Flexible Hose
- Mounting Hardware (screws, wall plugs)
- Installation Guide (this document)
3. Setup and Installation
Important: Installation should be performed by a qualified professional or a person with adequate plumbing knowledge. Ensure water supply is turned off before starting.
3.1 Tools Required
- Drill
- Drill bits (appropriate for wall material)
- Measuring tape
- Pencil
- Spirit level
- Screwdriver
- Adjustable wrench
3.2 Mounting Instructions
- Prepare the Wall: Choose a suitable location on the wall, ensuring it is structurally sound and free from hidden pipes or electrical wires. Mark the desired height for the top and bottom mounting points of the shower bar.
- Mark Drill Holes: Use the shower bar or the provided template to accurately mark the positions for drilling. Ensure the marks are level using a spirit level.
- Drill Holes: Drill holes at the marked positions, using a drill bit suitable for your wall material. Insert the wall plugs into the drilled holes.
- Attach Mounting Brackets: Secure the mounting brackets to the wall using the provided screws.
- Install Shower Bar: Carefully position the shower bar onto the mounting brackets. Secure it in place according to the specific design of the brackets (e.g., tightening grub screws).
- Connect Hose: Attach the flexible hose to the water outlet and to the hand shower. Ensure all connections are hand-tightened, then use an adjustable wrench for a final snug fit, being careful not to overtighten.
- Attach Hand Shower: Place the hand shower into its holder on the shower bar.
- Adjust Shelves: The integrated shelves can be adjusted to your preferred height. Loosen the securing mechanism, slide the shelf to the desired position, and re-tighten.
4. Operating Instructions
4.1 Using the Hand Shower
The 100 mm hand shower offers two distinct spray modes: Rain and SilkRain. To switch between modes, gently rotate the shower head. The holder on the shower bar allows for easy adjustment of the hand shower's height and angle.
4.2 Adjusting Shelves
The integrated shelves provide convenient storage for shower essentials. To adjust their height, locate the small lever or button on the side of the shelf's attachment point. Press or lift it to release the shelf, slide it to the desired position, and then release to lock it in place.
5. Maintenance and Care
Regular cleaning and maintenance will ensure the longevity and optimal performance of your Ideal Standard BD586XG shower bar.
5.1 Cleaning the Shower Bar and Hand Shower
- Use a soft cloth and mild soap or a non-abrasive bathroom cleaner.
- Avoid abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the Silk Black finish.
- For limescale removal from the hand shower nozzles, gently rub the silicone nozzles to dislodge deposits. The "Easy to Clean" feature allows for quick and effortless limescale removal.
- Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
5.2 Hose Care
The IdealFlex anti-twist hose is designed for durability. Avoid kinking or excessive pulling on the hose to maintain its integrity.
6. Troubleshooting
If you encounter any issues with your shower bar, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Low water pressure from hand shower | Clogged nozzles or EcoFlow regulator | Clean hand shower nozzles by rubbing them. Check if the EcoFlow regulator is partially blocked (consult a professional if unsure). |
| Water leakage at hose connection | Loose connection or worn washer | Ensure the hose connections are tightened properly. Replace the washer if it appears worn. |
| Shower bar feels loose on the wall | Mounting screws are loose | Carefully re-tighten the mounting screws. Do not overtighten. If the wall plugs are damaged, professional repair may be needed. |
| Shelves do not stay in place | Securing mechanism is not engaged | Ensure the shelf's securing mechanism is fully engaged after adjustment. |
If the problem persists after attempting these solutions, please contact Ideal Standard customer support or a qualified plumber.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | BD586XG |
| Brand | Ideal Standard |
| Product Dimensions (L x W x H) | 60 x 4.8 x 10.5 cm |
| Item Weight | 2.2 Kilograms |
| Color | Silk Black |
| Material Type | Mixed Aluminum (84% recycled) |
| Finish Type | Brushed |
| Mounting Type | Wall Mount |
| Included Components | Shower Bar, Shelves, Hand Shower, Flexible Hose |
| Hand Shower Head Size | 100 mm |
| Country of Origin | China |
8. Warranty and Support
This product comes with a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or visit the official Ideal Standard website. For technical support, spare parts, or any inquiries, please contact Ideal Standard customer service.
Contact Information: Please refer to the Ideal Standard official website or your purchase receipt for the most up-to-date contact details for your region.