VEVOR 18 Inch Oscillating Wall Mount Fan User Manual

1. Product Overview

The VEVOR 18 inch Oscillating Wall Mount Fan is designed for powerful air movement in various settings, including indoor, commercial, residential, warehouse, greenhouse, workshop, and basement environments. It features a durable metal construction, aluminum blades, and multiple speed settings to ensure optimal airflow and comfort.

Figure 1: VEVOR 18 inch Oscillating Wall Mount Fan.

Key Features:

• High Velocity Airflow: Delivers up to 4000 CFM with a reach of approximately 30 ft, ensuring effective cooling and air circulation.
• Three Speed Settings: Easily adjustable via a high-strength metal pull-string for customized airflow.
• Oscillating Function: Provides a 90-degree oscillating sweep to cover a wide area.
• Adjustable Tilt: Can be tilted vertically for precise airflow direction.
• Durable Construction: Features a fully sealed 73W motor, all-metal casing, and aluminum blades for longevity and quiet operation. ETL listed for safety.
• Space-Saving Design: Wall-mountable design saves floor space and allows for optimal air distribution.

2. Important Safety Instructions

As with all electrical appliances, basic safety precautions should always be followed to reduce the risk of electric shock, fire, or injury to persons, including the following precautions:

1. Read all the instructions before using this fan.
2. Use this fan only as described in this manual. Any other use not recommended by the manufacturer may cause electrical shock, fire or injury to persons.
3. Do not operate the fan with a damaged power cord or after the fan malfunctions or has been dropped in any manner.
4. Use of extreme caution is necessary when any fan is used by or near children, disabled persons or pets and whenever the fan is left operating unattended.
5. Do not place the fan on a small, not level, uneven or any surface which might allow fan to tip or fall.
6. For proper operation, fan should be placed on a smooth, non-combustible, level surface.
7. Always unplug fan when not in use, when moving from place to place, when assembling or disassembling parts, and before cleaning.
8. The use of attachments not recommended or sold by the manufacturer may cause hazards.
9. Do not use it in or around wet and damp environments for a long time.
10. Do not pull power cord under carpeting. Do not cover cord with throw rugs, runners or the like. Arrange cord away from traffic area where it will not be tripped over.
11. Do not insert or allow any object to enter any openings on the fan. Doing so may cause electric shock and/or fire hazard. Avoid contact with moving parts.
12. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
13. Children should be supervised to ensure they do not play with the appliance.

3. Product Components

The VEVOR 18 inch Oscillating Wall Mount Fan comes with the following components:

• 1 x Industrial Wall Fan (main unit with motor, blades, and grille)
• 1 x Wall Mounting Bracket
• 1 x User Manual (this document)
• Mounting Hardware (expansion bolts, screws, washers, nuts, cotter pin)
• Pull-string extension chain

Figure 2: Main fan unit with its components.

4. Setup & Installation

This fan is designed for wall mounting to save space and optimize airflow. Ensure you select a solid wall surface capable of supporting the fan's weight and vibration.

Tools Required:

• Cross screwdriver
• Small wrench
• Hammer (if using expansion bolts)
• Drill (for pilot holes if needed)

Installation Steps:

1. Mount the Bracket: Position the wall mounting bracket on your desired solid wall surface. Mark the three screw holes. Drill pilot holes if necessary. Securely fasten the bracket to the wall using the provided screws or expansion bolts.

Figure 3: Visual guide for wall mounting steps.
2. Attach the Fan to the Bracket: Align the fan's mounting arm with the bracket. Secure the fan to the bracket using the provided bolt, rubber spacer, washers, and nut. Tighten securely. Insert the cotter pin to prevent accidental loosening.
3. Adjust Tilt: The fan can be tilted vertically. Loosen the knobs on the side of the fan to adjust the angle, then tighten them to secure the desired position.
4. Connect Power: Plug the fan's 6 ft power cord into a suitable electrical outlet (AC 115V/60Hz). Ensure the outlet is easily accessible.
5. Attach Pull-String Extension (Optional): If the fan is mounted high, attach the included extension chain to the pull-string for easier access to controls.

Figure 4: Examples of wall-mounted fan installations in different environments like gym, patio, garage, and deck.

5. Operating Instructions

The VEVOR Wall Mount Fan is simple to operate with its pull-string controls.

Controlling Fan Speed:

• Pull the metal pull-string once to turn the fan ON to Low speed.
• Pull the string a second time for Medium speed.
• Pull the string a third time for High speed.
• Pull the string a fourth time to turn the fan OFF.

Figure 5: Illustration of the three speed settings (3000 CFM Low, 3550 CFM Medium, 4000 CFM High) and pull-string control.

Oscillation Function:

• The fan offers a 90-degree left and right oscillation feature to distribute air across a wider area.
• To activate oscillation, locate the separate pull-string for oscillation (if available, or a switch on the motor housing). Pull it to engage the oscillating movement.
• Pull it again to stop oscillation and fix the fan in one direction.

Figure 6: Demonstrates the 90-degree left and right oscillation and 30-degree manual tilt adjustment.

Official Product Video:

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your VEVOR Wall Mount Fan. Always unplug the fan before performing any maintenance.

• Cleaning: The rugged metal construction and aluminum blades are designed for easy disassembly and cleaning. Regularly wipe down the fan blades and grille with a soft, damp cloth to remove dust and debris. Do not use abrasive cleaners or immerse the fan in water.
• Storage: If storing the fan for an extended period, ensure it is clean and dry. Store it in a cool, dry place away from direct sunlight and moisture.
• Inspection: Periodically inspect the power cord for any signs of damage. If the cord is damaged, do not use the fan and contact customer support for assistance.

7. Troubleshooting

If you encounter issues with your VEVOR Wall Mount Fan, refer to the following common troubleshooting steps:

8. Specifications

Figure 7: Detailed dimensions and key specifications of the VEVOR Wall Mount Fan.

9. Warranty & Support

For technical support and warranty information, please visit the official VEVOR support website.

Official VEVOR Support: www.vevor.com/support

Figure 8: VEVOR Technical Support and E-Warranty Certificate information.