SAVILAND B0BYYRPYR2

SAVILAND Acrylic Nail Kit & Electric Nail Drill User Manual

Model: B0BYYRPYR2

Introduction

This manual provides detailed instructions for the safe and effective use of your SAVILAND Acrylic Nail Kit and Electric Nail Drill. Please read thoroughly before first use to ensure proper application and operation, and to maximize the lifespan of your products.

Safety Information

  • Always wear appropriate eye protection during use of the electric nail drill.
  • Keep all components of the kit out of reach of children.
  • Do not use acrylic products or the electric drill on damaged, infected, or unhealthy nails. Consult a professional if you have concerns.
  • Disconnect the electric nail drill from its power source when not in use, when changing bits, or during cleaning.
  • Avoid direct contact of acrylic liquid with skin and eyes. In case of accidental contact, rinse immediately with plenty of water and seek medical advice if irritation persists.
  • Ensure adequate ventilation in your workspace when working with acrylic products to minimize inhalation of fumes.
  • Do not apply excessive pressure with the electric nail drill; use gentle, controlled movements to prevent injury or damage to nails.

Package Contents

The SAVILAND Acrylic Nail Kit includes:

  • 30g Clear Acrylic Nail Powder
  • 60ml Acrylic Liquid
  • 1pc Acrylic Nail Brush (Size 12)
  • 10pcs Nail Forms
  • 1pc Nail File

The Electric Nail Drill includes:

  • Electric Nail Drill Machine (20,000 RPM)
  • 7pcs Nail Drill Bits
  • 51pcs Sanding Bands
  • USB Power Cable with Speed Control
Saviland Acrylic Nail Kit contents including powder, liquid, brush, and nail forms.

This image displays the complete Saviland Acrylic Nail Kit, featuring the clear acrylic powder, acrylic liquid, a professional acrylic brush, and nail forms, essential for starting your acrylic nail application.

Setup

Preparing for Acrylic Application

  1. Ensure your workspace is clean, well-lit, and well-ventilated.
  2. Gather all components of the acrylic nail kit, including the powder, liquid, brush, and nail forms.
  3. Prepare your natural nails by cleaning, gently filing, and pushing back cuticles. Ensure nails are free of oils and debris.

Setting up the Electric Nail Drill

  1. Connect the USB cable to the electric nail drill and a suitable USB power source (e.g., power bank, laptop, AC adapter).
  2. Select the appropriate nail drill bit for your specific task (e.g., grinding, shaping, cuticle removal, polishing).
  3. Insert the chosen drill bit firmly into the drill head until it clicks into place. Ensure it is secure before operation.
Various nail drill bits included with the Saviland Electric Nail Drill.

This image illustrates the different types of nail drill bits provided with the Saviland Electric Nail Drill, each designed for specific tasks such as shaping, polishing, and cuticle removal.

Operating Instructions

Acrylic Nail Application

  1. Nail Preparation: Ensure natural nails are clean, dry, and free of oils. Gently push back cuticles.
  2. Nail Form Application: Carefully place a nail form under the free edge of the natural nail, ensuring it fits snugly and creates a seamless extension of the nail bed.
  3. Acrylic Bead Creation: Dip the acrylic brush into the acrylic liquid (monomer), then gently wipe off any excess liquid on the edge of the dappen dish. Lightly touch the brush tip into the acrylic powder to pick up a small, wet bead.
  4. Application: Apply the acrylic bead to the nail form and natural nail, shaping it to create the desired extension, apex, and C-curve. Work efficiently as the acrylic will begin to set.
  5. Curing: Allow the acrylic to air dry completely. For beginners, the typical drying time is approximately 5-8 minutes, depending on environmental conditions and bead size.
  6. Shaping: Once the acrylic is fully hardened, carefully remove the nail form. Use the provided nail file to shape, smooth, and refine the acrylic nail to your desired contour.
Step-by-step acrylic nail application using Saviland kit.

This image demonstrates the process of applying acrylic nails using the Saviland kit, showing the brush, powder, liquid, and a hand with partially completed acrylic extensions.

Examples of nail extensions and carving created with Saviland acrylic powder.

This image showcases various nail art designs, including nail extensions, carving, and adhesive diamonds, all created using the Saviland acrylic powder and liquid system.

Electric Nail Drill Usage

  1. Power On: Turn on the electric nail drill using the power switch located on the USB cable.
  2. Speed Adjustment: Use the adjustable speed button (0-20,000 RPM) to select the desired rotation speed. Always start with a lower speed, especially for beginners, and gradually increase as needed.
  3. Direction Control: Use the R/F button to switch between forward and reverse rotation directions. This allows for comfortable use on both hands and for different techniques.
  4. Grinding/Shaping: Gently guide the drill bit over the nail surface to grind, shape, or smooth acrylic or natural nails. Maintain light, consistent pressure and avoid staying in one spot for too long to prevent heat buildup.
  5. Cuticle/Dead Skin Removal: Use specific bits (e.g., Needle Head, Safety Bit) at a low speed to carefully and gently remove excess cuticles and dead skin around the nail plate.
  6. Polishing: For a smooth finish, use fine-grit sanding bands or specialized polishing bits.
  7. Gel Polish Removal: Utilize appropriate bits (e.g., Ceramic Cone Bits) to gently and safely remove gel nail polish without damaging the natural nail.
  8. Power Off: After use, turn off the drill and disconnect it from the power source.
Saviland Electric Nail Drill features including speed control and forward/reverse buttons.

This image highlights the ergonomic design of the Saviland Electric Nail Drill, detailing the adjustable speed button (0-20,000 RPM) and the R/F button for forward and reverse rotation.

Detailed description of each nail drill bit and its function.

This image provides a visual guide to the various nail drill bits included, such as Cone Bit, Safety Bit, Needle Head, Small Barrel, Large Barrel, Mandrel & Sanding Band, and Ceramic Cone Bits, explaining their specific uses for nail care.

Maintenance

Electric Nail Drill Care

  • After each use, clean the drill bits with a small brush to remove dust and debris.
  • Disinfect drill bits with an appropriate disinfectant solution to maintain hygiene.
  • Store the electric drill and its bits in a dry, clean place, away from moisture and direct sunlight.
  • Do not immerse the electric drill machine in water or any liquids. Clean the body with a dry or slightly damp cloth.

Acrylic Brush Care

  • Clean the acrylic brush immediately after each use with brush cleaner or monomer to prevent acrylic from hardening in the bristles.
  • Reshape the bristles to their original form and store the brush flat or hanging downwards to maintain its shape.

General Kit Maintenance

  • Keep acrylic powder and liquid containers tightly sealed when not in use to prevent contamination, moisture absorption, and evaporation.
  • Store all products in a cool, dry place away from direct sunlight and heat sources.

Troubleshooting

Acrylic Nails

  • Problem: Acrylic not setting or taking too long to harden.
    Solution: Ensure the correct liquid-to-powder ratio is used. Too much liquid can slow curing. Work in a well-ventilated area, but avoid strong drafts that can interfere with the chemical reaction. Ensure the acrylic liquid is fresh and not expired.
  • Problem: Acrylic lifting or yellowing after application.
    Solution: Ensure proper nail preparation (clean, dehydrated, no oils). Avoid excessive exposure to UV light (from sun or tanning beds) which can cause yellowing. Ensure the acrylic liquid is not contaminated and is stored correctly. Proper application technique is crucial to prevent lifting.

Electric Nail Drill

  • Problem: Drill not turning on.
    Solution: Check the USB connection to both the drill and the power source. Ensure the power source is active and the power switch on the cable is in the "on" position. Try a different USB port or power adapter.
  • Problem: Drill bits not spinning or feeling loose.
    Solution: Ensure the drill bit is fully and securely inserted into the chuck mechanism. If the bit is worn, replace it.
  • Problem: Drill overheating during use.
    Solution: Reduce pressure applied during use. Allow the drill to cool down if it feels warm. Avoid prolonged continuous use; take short breaks. Ensure the ventilation holes (if any) are not blocked.

Specifications

  • Brand: SAVILAND
  • Model: B0BYYRPYR2
  • Acrylic Powder Weight: 30g (Clear)
  • Acrylic Liquid Volume: 60ml
  • Electric Nail Drill RPM: 0-20,000 RPM (Adjustable)
  • Power Source: USB
  • Material: Acrylic (for nail products)
  • Finish Type: Glossy (for nails)
  • Included Components: Nail File, Acrylic Powder, Acrylic Liquid, Nail Brush, Nail Forms, Electric Nail Drill, Drill Bits, Sanding Bands.

Warranty and Support

SAVILAND products are manufactured to high-quality standards. For any questions, concerns, or support needs regarding your product, please contact SAVILAND customer service through the retailer's platform or the official SAVILAND website. Please retain your proof of purchase for any warranty claims. Specific warranty details may vary; refer to your purchase documentation for more information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.