Ratsamee B0BYSWG9RH
Ratsamee 28x36 Inch LED Bathroom Mirror
Model: B0BYSWG9RH
1. Introduction
Thank you for choosing the Ratsamee 28x36 Inch LED Bathroom Mirror. This mirror is designed to enhance your bathroom experience with its advanced features, including front and backlit illumination, dimmable lighting, and an anti-fog function. This manual provides detailed instructions for safe installation, operation, and maintenance to ensure optimal performance and longevity of your mirror.
Image 1: Ratsamee 28x36 Inch LED Bathroom Mirror.
2. Safety Information
Please read all instructions carefully before installation and use. Keep this manual for future reference.
Important Warnings:
WARNING: This mirror is designed for wall mounting only. Ensure it is securely fastened to the wall to prevent it from falling and causing injury. Be cautious of the sharp edges when handling, installing, or using the mirror.
General Safety Precautions:
- Always disconnect power before installing or servicing the mirror.
- Installation should be performed by a qualified electrician if hard-wiring is chosen.
- Do not expose the mirror to excessive moisture or direct water spray.
- Avoid striking the mirror surface with hard objects.
- Keep out of reach of children.
- Ensure the mounting surface is structurally sound and can support the weight of the mirror.
Image 2: The mirror's LED driver is UL/FCC certified for quality and safety.
3. Product Features
The Ratsamee LED Bathroom Mirror is equipped with several advanced features for convenience and functionality:
- Anti-fog Function: Touch the anti-fog button to clear the mirror surface, typically within 5-10 minutes. The anti-fog function operates independently from the lighting.
- Dimmable & Memory Function: Long press the light control button to adjust brightness. The mirror remembers your last brightness setting for convenience.
- Dual Lighting (Front & Backlit): Features both front and backlit LED strips for enhanced illumination. CRI>90 ensures clear and comfortable visual lighting without flickers.
- Tempered Glass: Constructed with 5mm tempered glass, making it shatter-proof and explosion-proof for increased safety and durability.
- High-Density LED Strips: Utilizes 192 LEDs per meter with a lifespan of over 50,000 hours.
Image 3: Double lighting provides brighter and clearer illumination.
Image 4: The mirror offers three distinct light modes: backlight only, front light only, and both front and back light.
Image 5: Choose from 6000K Cool Light, 4500K Neutral Light, or 3000K Warm Light settings.
Image 6: Tempered glass construction provides superior durability and shatter-proof safety compared to ordinary glass.
4. Setup and Installation
The Ratsamee LED Bathroom Mirror offers flexible installation options and can be mounted either vertically or horizontally.
Installation Methods:
- Wall Switch Installation: This method is simpler and can be done with clear manual instructions.
- Hard-wired Installation: Recommended to be performed by a professional electrician for safety and proper connection.
Mounting Instructions:
- Mark the spots for drilling on the wall using the provided template or measurements. Apply wall anchors as needed.
- Secure the two mounting brackets to the wall with screws, ensuring they are level.
- Carefully slot the mirror onto the brackets, ensuring it hangs securely.
Image 7: The mirror can be hung horizontally or vertically, and connected via plug or wall switch.
Image 8: Effortless installation is achieved with double short brackets and an integrated slot for secure hanging.
Image 9: Follow these three simple steps for installation: mark and drill, secure brackets, and hang the mirror.
Size Selection Guide:
For optimal comfort and aesthetics, consider the following tips when selecting the right mirror size and placement:
- It is recommended to leave about 3 inches below the ceiling light.
- The bottom of the mirror is recommended to be about 2-3 inches above the faucet.
Image 10: Suggested guide for comfortable mirror placement.
5. Operating Instructions
Your Ratsamee LED Bathroom Mirror features sensitive touch buttons for easy control of its functions.
Video 1: Demonstration of the LED Bathroom Mirror's features, including touch controls for anti-fog, light adjustment, and power.
Touch Button Functions:
- Power ON/OFF: Tap the power button to turn the mirror lights on or off.
- Brightness Adjustment: Hold the light control button for 2 seconds to adjust the brightness level. The mirror will save your preferred setting.
- Anti-fog Activation: Tap the anti-fog button to activate the defogging function. It automatically shuts off after 1 hour.
- Light Color Temperature Adjustment: Tap the light color button to cycle through 6000K Cool Light, 4500K Neutral Light, and 3000K Warm Light.
Image 11: The smart memory function retains your previous lighting status.
Image 12: The anti-fog function automatically shuts off after 1 hour.
6. Maintenance
Proper care and maintenance will ensure the longevity and optimal performance of your LED bathroom mirror.
Cleaning Instructions:
- Always turn off the mirror and disconnect power before cleaning.
- Use a soft, damp cloth with a mild, non-abrasive glass cleaner.
- Do not use harsh chemicals, abrasive cleaners, or scouring pads, as these can damage the mirror surface or frame.
- Wipe dry with a clean, lint-free cloth to prevent water spots.
General Care:
- Avoid direct impact on the mirror surface.
- Ensure proper ventilation in the bathroom to minimize condensation buildup.
- Regularly check the mounting hardware for tightness to ensure the mirror remains securely attached to the wall.
7. Troubleshooting
If you encounter any issues with your Ratsamee LED Bathroom Mirror, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Mirror lights do not turn on. | No power supply; loose connection; faulty switch. | Check power outlet/circuit breaker. Ensure all connections are secure. Test the wall switch if applicable. |
| Anti-fog function not working. | Anti-fog function not activated; excessive humidity. | Ensure the anti-fog button is pressed. Allow 5-10 minutes for full effect. Reduce bathroom humidity if possible. |
| Lights are flickering or dim. | Low power; loose wiring; LED strip issue. | Check power supply stability. Verify wiring connections. If problem persists, contact customer support. |
| Mirror is unstable on the wall. | Improper installation; loose mounting brackets. | Re-check installation steps. Ensure mounting brackets are securely fastened and the mirror is properly seated. |
If the issue persists after attempting these solutions, please contact Ratsamee customer support for further assistance.
8. Specifications
Detailed specifications for the Ratsamee 28x36 Inch LED Bathroom Mirror:
| Attribute | Detail |
|---|---|
| Brand | Ratsamee |
| Model Number | B0BYSWG9RH |
| Product Dimensions | 36"L x 28"W |
| Shape | Rectangular |
| Frame Material | Frameless |
| Mounting Type | Wall Mount |
| Special Feature | 50000 Hours Long Lifespan, 192 LEDs/M Light Strip, Aluminum alloy material |
| Color | Frontlit+backlit |
| Material | Silver Coating 5mm High Quality Glass |
| Item Weight | 24.1 Pounds |
| Assembly Required | Yes |
| Manufacturer | Ratsamee |
| Date First Available | August 9, 2023 |
9. Warranty Information
Ratsamee stands behind the quality of its products. Your LED Bathroom Mirror comes with the following warranty and service:
- 2-Year Warranty: Free repairs within 2 years from the date of purchase.
- 30-Day Free Return: Enjoy a 30-day free return policy for your peace of mind.
- Damaged Products: For damaged products, please send photos of the damage, and you will receive a free replacement without returning the damaged one.
Image 13: Information on warranty and support for damaged products.
10. Customer Support
For any questions about your Ratsamee LED Bathroom Mirror or assistance with your order, please contact our customer support team:
- 24/7 Email Assistant: Available to assist you with inquiries.
- Contacting the Seller: You can reach the seller, Uniquejack Direct, through Amazon's messaging system.
Steps to Contact Seller via Amazon:
- Go to the product page on Amazon.com.
- Click on "Uniquejack Direct" next to "Sold by".
- Select "Ask a question" to go to the Seller Messaging Assistant.
- Follow the prompts and type your question into the message box, then click "Send Message".
Image 14: Instructions for finding support and service through Amazon's seller messaging.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.