Introduction
Welcome to the user manual for your GRILIG Under Cabinet LED Motion Sensor Light. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and retain it for future reference.
Package Contents
- LED Closet Light (Quantity: 2)
- Iron Sheet with Adhesive (Quantity: 2)
- USB Cable (Quantity: 2)
- User Manual (Quantity: 1)
Key Features
- Dual Lighting Modes: Constant-on and motion-sensor modes with one-button switching.
- Adjustable Brightness: 10%-100% brightness adjustment with memory function.
- Motion Sensor: 120° angle, 3-meter range, activates in low-light conditions, turns off after 20 seconds of inactivity.
- Easy Installation: Built-in magnet for metal surfaces; adhesive iron sheets for non-metal surfaces.
- Rechargeable Battery: 2000mAh battery, 3-hour charging time, up to 60 days use in sensing mode (based on specific usage).
Safety Information
- This product is designed for indoor use only. Do not expose to water or high humidity.
- Use only the provided USB cable for charging.
- Do not attempt to disassemble or modify the light.
- Keep out of reach of children.
- Ensure the mounting surface is clean and dry before installation.
Setup & Installation
Your GRILIG LED Motion Sensor Light offers flexible installation options.
Charging Before First Use
Before initial use, fully charge the light. Connect the provided USB cable to the light's charging port and a 5V USB power adapter (not included). The indicator light will be red during charging and turn green when fully charged. Charging typically takes 3 hours.
Mounting Instructions
- For Metal Surfaces: The light has a built-in magnet. Simply attach it directly to any metal surface such as a refrigerator or steel cabinet.
- For Non-Metallic Surfaces:
Image: Installation steps for the GRILIG Under Cabinet Light. Step 1: Snap the light onto the metal plate. Step 2: Peel the adhesive backing from the metal plate. Step 3: Paste the light with the plate onto the desired non-metallic surface.
Step 1: Prepare the Surface. Clean and dry the desired installation area thoroughly.
Step 2: Attach the Iron Sheet. Peel off the protective film from one side of the adhesive on the iron sheet. Firmly press the iron sheet onto the cleaned surface.
Step 3: Mount the Light. The light has a built-in magnet. Attach the light magnetically to the installed iron sheet. This allows for easy removal for charging.
Operation
Power Button and Mode Selection
The light features a single button for controlling power and modes.
Image: Detailed view of the control button and its functions for mode switching and brightness adjustment.
- First Press: Enters Constant Light Mode (Always On).
- Second Press: The light flashes 3 times, then enters Motion Sensor Mode.
- Third Press: Turns the light OFF.
Brightness Adjustment
In either Constant Light Mode or Motion Sensor Mode, press and hold the button for 3 seconds to adjust the brightness. The brightness will cycle from 10% to 100%. Release the button at your desired brightness level. The light has a memory function and will remember your last brightness setting.
Motion Sensor Mode Details
- Automatic Activation: In motion sensor mode, the light will only turn on in low-light conditions (e.g., at night or in a dark closet). It will not activate in well-lit environments.
- Detection Range: The sensor covers a 120° angle and a range of up to 3 meters (10 feet).
- Automatic Shut-off: The light will automatically turn off approximately 20 seconds after no motion is detected.
Image: Illustration of the motion sensor's detection range and its functionality in different light conditions.
Charging
The GRILIG LED Motion Sensor Light is equipped with a 2000mAh rechargeable battery.
Image: The light connected to a USB charger, with indicator lights showing charging status (red for charging, green for fully charged).
- Connect the provided USB cable to the light's charging port and a standard 5V USB power source.
- The indicator light will glow red while charging.
- The indicator light will turn green when the battery is fully charged.
- A full charge typically takes about 3 hours.
- In sensing mode, a fully charged light can last up to 60 days, based on an average usage of 6 activations per day, each lasting less than 60 seconds.
Maintenance
- Clean the light surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ensure the motion sensor lens is clear of dust and obstructions for optimal performance.
- If the adhesive on the iron sheet loses its stickiness, replace it with new strong double-sided adhesive tape.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Battery is depleted. Incorrect mode selected. Sensor obstructed. | Charge the battery. Press the button to cycle through modes (Constant-on, Motion Sensor). Ensure sensor is clear. |
| Light does not activate in Motion Sensor Mode. | Ambient light is too bright. Motion is outside detection range. Battery is low. | Motion sensor mode only works in low-light conditions. Ensure motion occurs within 3 meters and 120° angle. Charge the battery. |
| Light falls off mounting surface. | Adhesive is weak or surface was not clean. Magnetic attachment is weak. | Clean surface thoroughly and reapply iron sheet with new strong adhesive tape. Ensure light is properly aligned with the magnetic plate. |
| Brightness is too low/high. | Brightness setting needs adjustment. | Press and hold the button for 3 seconds to adjust brightness. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | Under Cabinet Lights |
| Model Number | SVR-H4114-PIR30 |
| Brand | GRILIG |
| Color | White |
| Material | Aluminum, Plastic |
| Light Source Type | LED |
| Power Source | Battery Powered |
| Battery Capacity | 2000mAh |
| Charging Time | Approx. 3 hours |
| Voltage | 5 Volts (DC) |
| Motion Sensor Range | Up to 3 meters (10 feet) |
| Motion Sensor Angle | 120 degrees |
| Auto Shut-off Time | 20 seconds (after no motion) |
| Product Dimensions | 11"L x 0.4"W x 1.6"H |
| Item Weight | 0.4 Pounds (6.4 ounces) |
| Installation Type | Magnetic Mount, Wall Mount |
| Indoor/Outdoor Usage | Indoor |
| Control Method | Push Button |
| Water Resistance Level | Not Water Resistant |
Warranty & Support
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official GRILIG website.