SoundPEATS SND-0023
SoundPEATS Life TWS Earphones User Manual
Model: SND-0023
Introduction
Thank you for choosing SoundPEATS Life TWS Earphones. This manual provides detailed instructions on how to set up, operate, maintain, and troubleshoot your earphones to ensure optimal performance and longevity. Please read this manual thoroughly before using the product.

Image: SoundPEATS Life TWS Earphones in their open charging case. The black earbuds are visible, one in each charging slot, with the case lid open to the left.
Package Contents
- SoundPEATS Life TWS Earphones (Left and Right)
- Charging Case
- USB-C Charging Cable
- User Manual
Setup
1. Initial Charging
Before first use, fully charge the earphones and the charging case. Connect the USB-C charging cable to the charging port on the case and a power source. The indicator light on the case will show charging status.

Image: SoundPEATS Life TWS Earphones placed next to their closed charging case. A small LED indicator light is visible on the front of the case.
2. Pairing with Your Device
- Ensure the earphones are in the charging case and the case has sufficient battery.
- Open the charging case. The earphones will automatically enter pairing mode.
- On your device (smartphone, tablet, etc.), go to Bluetooth settings and turn on Bluetooth.
- Look for "SoundPEATS Life" in the list of available devices and select it to connect.
- Once connected, you will hear a confirmation prompt from the earphones.
3. Resetting the Earphones
If the earphones fail to pair or experience connection issues, you may need to reset them:
- Place both earphones back into the charging case and ensure they are charging.
- Press and hold the button on the charging case for approximately 10 seconds until the indicator light flashes red and white twice.
- Close the case, then open it again to re-enter pairing mode.
- Delete "SoundPEATS Life" from your device's Bluetooth list and attempt to pair again.
Operating Instructions
Touch Controls
The SoundPEATS Life earphones feature touch-sensitive controls on each earbud. The following table outlines common functions:
| Function | Action (Left Earbud) | Action (Right Earbud) |
|---|---|---|
| Play/Pause | Single tap | Single tap |
| Volume Down | Tap and hold | N/A |
| Volume Up | N/A | Tap and hold |
| Next Track | Double tap | Double tap |
| Previous Track | Triple tap | Triple tap |
| Answer/End Call | Single tap | Single tap |
| Reject Call | Tap and hold for 2s | Tap and hold for 2s |
| Activate Voice Assistant | Quadruple tap | Quadruple tap |
| Switch ANC/Transparency Mode | Tap and hold for 2s | Tap and hold for 2s |

Image: A diagram illustrating the Active Noise Cancellation (ANC) feature of the SoundPEATS Life TWS Earphones, showing a reduction of ambient noise by up to 25dB.
Maintenance
Cleaning
- Regularly clean the earbuds, especially the ear tips and charging contacts, with a soft, dry, lint-free cloth.
- Do not use abrasive cleaners, alcohol, or chemical solvents.
- Ensure no moisture enters the earbud openings or charging case.
Storage
- Store the earphones in their charging case when not in use to protect them and keep them charged.
- Avoid exposing the earphones to extreme temperatures, humidity, or dust.
Battery Care
- Charge the earphones and case regularly, even if not used frequently, to maintain battery health.
- Avoid completely draining the battery for extended periods.
Troubleshooting
Common Issues and Solutions
- Earphones not charging:
- Ensure the charging cable is securely connected to both the case and the power source.
- Check if the charging contacts on the earphones and inside the case are clean and free of debris.
- Try a different USB-C cable or power adapter.
- Only one earphone working:
- Place both earphones back into the charging case, close the lid, and then open it again.
- Perform a factory reset as described in the "Setup" section.
- Ensure both earphones have sufficient battery.
- Earphones not connecting to device:
- Ensure Bluetooth is enabled on your device.
- Move the earphones closer to your device.
- Forget "SoundPEATS Life" from your device's Bluetooth list and re-pair.
- Perform a factory reset.
- Low volume or poor sound quality:
- Adjust the volume on both your device and the earphones.
- Ensure the ear tips are properly sealed in your ear canal. Try different sized ear tips if available.
- Clean any earwax or debris from the earbud nozzles.
Specifications
| Brand | SoundPEATS |
| Model Number | SND-0023 |
| Color | Black |
| Battery Type | Rechargeable (integrated) |
| ASIN | B0BY6NXFPD |
| Manufacturer | SoundPeats |
Warranty and Support
SoundPEATS products typically come with a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official SoundPEATS website. For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact SoundPEATS customer service through their official channels.
Information regarding software updates and spare parts availability for this model is not explicitly provided at this time. Please check the official SoundPEATS website for the most current information.
Official SoundPEATS Website: www.soundpeatsaudio.com