Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your CNSUNWAY 4FT LED Tube Lights. These 18W, 2400LM, 6000K Daylight LED tubes are designed as Type A+B replacements for traditional T8, T10, and T12 fluorescent lights, offering both Plug & Play (with ballast) and Ballast Bypass (without ballast) installation options, with support for single-ended or double-ended power connections.
The CNSUNWAY LED tubes are engineered for energy efficiency, high brightness, and a long lifespan of up to 50,000 hours, making them suitable for various indoor applications such as garages and warehouses. They are ETL Listed, ensuring quality, safety, and reliability.
Product Specifications
Image: Visual representation of key product specifications including wattage, lumens, color temperature, lifespan, and power type.
- Wattage: 18 Watts
- Brightness: 2400 Lumens
- Color Temperature: 6000 Kelvin (Daylight)
- Light Type: LED
- Bulb Shape Size: T8 (Compatible with T10, T12 fixtures)
- Power Connection: Type A+B (Plug & Play / Ballast Bypass), Single-Ended or Double-Ended
- Voltage: 120-277 Volts AC
- Average Life: 50,000 Hours
- Material: Acrylonitrile Butadiene Styrene (ABS), Metal
- Dimensions: 4FT (47.24 inches length)
- Certifications: ETL Listed
Image: Detailed dimensions of the T8 LED tube, showing 4FT (47.24") length and 0.63" pin spacing.
Safety Information
Before installation, ensure the power supply to the fixture is turned off at the circuit breaker. Always consult a qualified electrician if you are unsure about any wiring procedures. Do not attempt to modify the LED tube in any way. These tubes are designed for indoor use only.
- Disconnect power before inspection, installation, or removal.
- Do not use with dimmers unless explicitly stated as compatible.
- Ensure the fixture is properly grounded.
- Avoid looking directly at the operating LED light.
Installation Instructions (Setup)
CNSUNWAY 4FT LED Tube Lights offer flexible installation options: Plug & Play (with existing ballast) or Ballast Bypass (direct wire).
Option 1: Plug & Play (Type A - With Ballast)
This method allows for direct replacement of fluorescent tubes without rewiring the fixture, provided your existing ballast is compatible.
- Turn off Power: Ensure the power to the fixture is completely off at the circuit breaker.
- Remove Old Tubes: Carefully remove the existing fluorescent tubes from the fixture.
- Check Ballast Compatibility: Refer to the Ballast Compatibility List provided in this manual to confirm your ballast model is supported. Using an unlisted ballast may cause damage or improper operation.
- Install LED Tubes: Insert the CNSUNWAY LED tubes into the fixture's existing sockets (tombstones).
- Restore Power: Turn the power back on at the circuit breaker.
Image: A hand demonstrating the simple insertion of an LED tube into a fixture, highlighting the 90-degree rotation for secure fit. Note: Base is not included.
Option 2: Ballast Bypass (Type B - Direct Wire)
This method involves removing the existing ballast and wiring the fixture directly to the main power supply. This is suitable for both single-ended and double-ended power connections.
- Turn off Power: Absolutely ensure the power to the fixture is completely off at the circuit breaker.
- Remove Old Tubes and Ballast: Carefully remove the existing fluorescent tubes. Then, locate and remove the ballast from the fixture.
- Rewire Fixture:
- For Double-Ended Power: Connect the live (L) wire (usually black) to the tombstone pins on one end of the fixture, and the neutral (N) wire (usually white) to the tombstone pins on the other end.
- For Single-Ended Power: Connect both the live (L) and neutral (N) wires to the tombstone pins on one end of the fixture. The other end of the fixture will not be wired.
Important: Ensure all connections are secure and insulated. If you are unfamiliar with electrical wiring, consult a qualified electrician.
- Install LED Tubes: Insert the CNSUNWAY LED tubes into the rewired fixture's sockets.
- Restore Power: Turn the power back on at the circuit breaker.
Image: Detailed wiring diagrams illustrating both Plug & Play (with magnetic or electronic ballast) and Ballast Bypass (double-ended and single-ended) installation methods. It shows how to connect AC 100-277V to the LED tube after removing or bypassing the ballast.
Ballast Compatibility List (For Plug & Play Installation)
The following table lists compatible ballasts for Plug & Play installation. If your ballast model is not listed, it is recommended to use the Ballast Bypass method.
Image: A comprehensive list of ballast models from various manufacturers (e.g., ACT, DAMAR, EIKO, ESPEN, GE, HALCO, KEYSTONE, OSRAM SYLVANIA, PHILIPS ADVANCE, PLUSRITE, ROBERTSON, SUNLITE, ULTRASAVE, UNIVERSAL) that are compatible with CNSUNWAY T8 LED tubes for Plug & Play operation. A warning notes that using unlisted ballasts may cause damage.
Warning: These tubes only work with the listed ballasts. Using unlisted ballasts may cause damage or losses.
Operating Instructions
Once properly installed, operating your CNSUNWAY LED Tube Lights is straightforward.
- Power On: Ensure the light fixture is connected to a power source and the circuit breaker is on.
- Switch On: Use the wall switch or fixture switch to turn the lights on. The LED tubes will provide instant, flicker-free illumination.
- Power Off: Use the wall switch or fixture switch to turn the lights off when not needed.
These LED tubes are designed for consistent, bright light output without humming or flickering.
Maintenance
CNSUNWAY LED Tube Lights require minimal maintenance due to their long lifespan and durable construction.
- Cleaning: To clean the tubes, ensure the power is off and the tubes are cool. Gently wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Inspection: Periodically check the tubes and connections for any signs of damage or loose wiring. If any issues are found, turn off the power immediately and address the problem.
- Replacement: With an average lifespan of 50,000 hours, frequent replacement is not expected. If a tube needs replacement, follow the installation instructions in reverse.
Troubleshooting
If you encounter issues with your CNSUNWAY LED Tube Lights, refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers or hums. |
|
|
| Light is dim. |
|
|
Warranty and Support
CNSUNWAY LIGHTING offers a 3-Year Protection for these LED tube lights. This warranty covers defects in materials and workmanship under normal use.
For any questions, technical assistance, or warranty claims, please contact CNSUNWAY LIGHTING customer service. They provide 24/7 after-sale service to ensure your satisfaction.
Contact information can typically be found on the product packaging or the official CNSUNWAY LIGHTING website.
Application Examples
These CNSUNWAY 4FT LED Tube Lights are suitable for a variety of indoor residential and commercial spaces, providing bright and efficient lighting.
Image: Collage showing CNSUNWAY LED tube lights installed in a garage, a hallway, a workshop, and a parking garage, demonstrating their versatility.