Folews 6-Tier Metal Wire Shelving Unit with Wheels Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Folews 6-Tier Metal Wire Shelving Unit. Please read these instructions carefully before assembly and use to ensure safe and efficient operation.

Image 1: Fully assembled Folews 6-Tier Metal Wire Shelving Unit in a kitchen setting.

2. Important Safety Information

WARNING:

• Do not exceed the weight capacity of 300 lbs per shelf. The total weight limit for the unit is 1800 lbs.
• Use caution when moving the unit to prevent tipping.
• Be careful around sharp edges and pinch points during assembly and use.
• Keep children and pets away from the moving cart.
• Always ensure the unit is stable before loading items.

3. Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Wire Shelves (6)
• Support Poles (4 sets, typically in two halves per pole)
• Plastic Sleeves/Clips (enough for all shelves)
• Caster Wheels (4, 2 with locking mechanism)
• Leveling Feet (4)
• Anti-toppling Screw Kit (for wall attachment)
• Additional Hooks (optional accessory)

4. Assembly Instructions

The Folews 6-Tier Metal Wire Shelving Unit features a snap-together design for easy, tool-free assembly. Follow these steps:

1. Attach Wheels or Leveling Feet: Decide whether to use the caster wheels for mobility or the leveling feet for stationary use. Screw the chosen components into the bottom of the four lower support poles. If using wheels, ensure the two locking wheels are on the same side for easier access.
2. Assemble Support Poles: Connect the upper and lower halves of each support pole by screwing them together.
3. Install Plastic Sleeves: Snap the two-part plastic sleeves around the grooves on the support poles at your desired shelf height. Ensure they are securely locked and at the same height on all four poles for each shelf.
4. Place First Shelf: Slide the first wire shelf down over the top of the poles until it rests firmly on the installed plastic sleeves. Apply gentle downward pressure on each corner to ensure it is seated correctly.
5. Repeat for Remaining Shelves: Continue installing plastic sleeves and placing shelves at your desired intervals.
6. Attach Anti-Toppling Kit (Optional but Recommended): For added stability, especially with heavy loads or in areas prone to movement, use the provided anti-toppling screw kit to secure the top of the unit to a wall stud.
7. Attach Additional Hooks (Optional): If included, attach the accessory hooks to the side of a shelf for hanging items.

Assembly Visual Aids:

Image 2: Product dimensions for the 6-Tier unit.

Image 3: Detailed view of components and assembly features.

Assembly Video:

5. Operating Instructions

Your Folews shelving unit is designed for versatile storage in various environments.

• Adjustable Shelves: The shelves can be repositioned at 1-inch increments along the support poles. To adjust, remove items from the shelf, detach the plastic sleeves, reposition them to the desired height, and then re-seat the shelf.
• Mobility and Stability:
  • With Wheels: Use the caster wheels for easy movement. Engage the locking mechanism on the two lockable wheels when the unit needs to remain stationary.
  • With Leveling Feet: The leveling feet provide stability on uneven surfaces. Adjust each foot individually to ensure the unit is level and does not wobble.
• Placement: Suitable for garages, kitchens, pantries, laundry rooms, basements, and utility spaces.

Usage Examples:

Image 4: Shelving unit in a kitchen.

Image 5: Shelving unit in a garage.

6. Maintenance

• Cleaning: Wipe the unit with a dry cloth to remove dust and debris. Avoid abrasive cleaners or harsh chemicals that may damage the powder-coated finish.
• Inspection: Periodically check all connections and ensure shelves are securely seated on the plastic sleeves. Verify that wheels or leveling feet are tight and functioning correctly.

7. Troubleshooting

• Unit is Wobbly:
  • Ensure all plastic sleeves are securely locked onto the poles and are at the same height for each shelf.
  • If using leveling feet, adjust them to compensate for uneven floor surfaces.
  • If using wheels, ensure the locking mechanisms are engaged when stationary.
  • Verify that the support poles are fully screwed together.
• Difficulty Adjusting Shelves:
  • Ensure the shelf is empty before attempting to adjust its height.
  • Make sure the plastic sleeves are fully detached before attempting to move them.
• Missing Parts: If any parts are missing upon arrival, please contact Folews customer support for assistance.

8. Specifications

9. Warranty and Customer Support

For any questions, missing parts, or support needs, please contact Folews customer service. Refer to your purchase documentation for specific warranty details.

You can visit the Folews store for more information: Folews Official Store