BANSKEY Keypad Fingerprint Deadbolt Electronic Door Lock Instruction Manual

1. Introduction and Overview

This manual provides detailed instructions for the installation, operation, and maintenance of your BANSKEY Keypad Fingerprint Deadbolt Electronic Door Lock. This advanced deadbolt offers multiple convenient entry methods including fingerprint recognition, user codes, and traditional keys. It is designed for enhanced security and ease of use in various residential settings.

Key features include:

• Up to 100 user codes and 100 fingerprints for flexible access management.
• Long-lasting battery life of up to 1 year with 4 AA batteries.
• Backlit keypad for visibility in low light conditions.
• Low battery alert to ensure timely battery replacement.
• Silent mode and vacation mode for customized security.
• Weather-resistant design for durability.
• Automatic door locking with adjustable delay (10-99 seconds).
• One-touch locking for immediate security.

Image 1.1: BANSKEY Keypad Fingerprint Deadbolt Electronic Door Lock.

Image 1.2: The BANSKEY Keypad Fingerprint Deadbolt Electronic Door Lock installed on a residential door.

2. Package Contents

Please verify that all components are present before beginning installation:

• Front Panel (Exterior Assembly)
• Back Panel (Interior Assembly)
• Mounting Plate
• Installation Screws
• 2 x Physical Keys
• Instruction Manual (This document)

3. Setup and Installation

The BANSKEY Keypad Fingerprint Deadbolt is designed for easy installation, typically requiring only a screwdriver and approximately 20 minutes. No extra drilling or hardwiring is needed for standard door preparations. The lock is compatible with both right-handed and left-handed doors.

Door Preparation Requirements:

• Bore Hole Diameter: 2-1/8 inches (54mm)
• Door Thickness: 1-3/8 inches to 2 inches (35mm-50mm)
• Backset: 2-3/8 inches or 2-3/4 inches (60mm or 70mm)

Image 3.1: Door preparation requirements for installation.

Installation Steps:

1. Install the Bolt: Insert the deadbolt into the door edge. Ensure the latch is oriented correctly for your door's swing.
2. Install Front Panel: Position the exterior keypad assembly onto the door, aligning it with the bolt.
3. Connect the Cable: Route the cable from the front panel through the door and connect it to the back panel.
4. Install Back Panel: Secure the interior assembly to the door using the mounting plate and screws.
5. Insert Batteries: Install 4 AA batteries into the battery compartment of the back panel.
6. Calibrate the Lock: After installation, press the 'SET' button inside the battery area to calibrate the deadbolt. This step is crucial for proper locking and unlocking operation. Failure to calibrate may result in an error message during operation.

Image 3.2: Visual guide for the four main installation steps.

Installation Video:

4. Operating Instructions

4.1 Unlocking the Door

• Fingerprint Unlock: Place your registered finger on the fingerprint sensor. The lock will unlock if the fingerprint is recognized. The sensor has a 99.99% recognition rate and unlocks in approximately 0.3 seconds.


Image 4.1: Fingerprint unlock in action.

• Code Unlock: Enter your 4-8 digit user code on the keypad, then press the lock/unlock button. The lock supports up to 100 user codes.

Image 4.2: Keypad for code entry.
• One-Time Code: Generate and use a temporary one-time code for guests or service providers.


Image 4.3: Using a one-time code for temporary access.

• Key Unlock: Insert one of the provided physical keys into the keyhole and turn to unlock the deadbolt.

4.2 Locking the Door

• Automatic Locking: The lock can be configured to automatically lock after a set period (10-99 seconds) once the door is closed.

Image 4.4: Automatic locking feature.
• One-Touch Locking: Press and hold the lock button on the keypad to immediately secure the deadbolt.


Image 4.5: One-touch locking for quick security.

4.3 Advanced Features

• Silent Mode: Deactivates sound feedback for discreet operation.
• Vacation Mode: Enhances security by disabling all user codes and fingerprints until a master code or key is used.
• Backlit Keypad: The keypad illuminates for easy use in the dark.

Image 4.6: Backlit keypad and weatherproof design.

5. Maintenance

5.1 Battery Replacement

The lock operates on 4 AA batteries and is designed for up to 1 year of use. A low battery alert will notify you when batteries need to be replaced. To replace batteries:

1. Remove the back panel cover.
2. Carefully remove the old AA batteries.
3. Insert four new AA alkaline batteries, ensuring correct polarity.
4. Replace the back panel cover.

5.2 Cleaning

To maintain the appearance and functionality of your lock, wipe the exterior surfaces with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish and electronic components. Keep the fingerprint sensor clean and dry for optimal performance.

5.3 Weather Resistance

The lock features a weather-resistant design. However, prolonged exposure to extreme weather conditions (heavy rain, snow, direct sunlight) may affect its lifespan. Ensure the lock is properly installed to prevent water ingress.

6. Troubleshooting

• Lock does not operate after installation: Ensure the lock was properly calibrated by pressing the 'SET' button inside the battery compartment after installation. Incorrect calibration can prevent the bolt from extending or retracting correctly.
• Fingerprint not recognized: Ensure your finger is clean and dry. Try repositioning your finger on the sensor. If issues persist, re-register your fingerprint.
• Keypad not responding: Check battery levels. If the batteries are low or depleted, replace them immediately. The lock provides a low battery alert.
• Automatic locking not working: Verify that the automatic locking feature is enabled and the delay time is set correctly in the programming menu.
• Battery life is shorter than expected: Factors such as frequent usage, extreme temperatures, and the quality of batteries used can affect battery life. Use high-quality alkaline batteries.
• Cannot add new fingerprints/codes: Ensure you are in programming mode and following the correct sequence as outlined in the detailed programming guide (refer to the full manual for specific programming steps).

7. Specifications

8. Warranty and Support

BANSKEY offers a 30-day money-back guarantee and a 1-year product warranty from the date of purchase. Additionally, lifetime customer support is provided for all BANSKEY products.

For technical assistance, warranty claims, or any questions regarding your BANSKEY Keypad Fingerprint Deadbolt, please contact our customer support team:

• Email: support@banskey.com (example)
• Phone: 1-800-XXX-XXXX (example)
• Website: www.banskey.com (example)

Please have your model number (BANSKEY L Model) and purchase date ready when contacting support.