Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your ProLight 111510 20W LED Dock Light. Please read these instructions thoroughly before use and retain them for future reference.
Image: The ProLight 111510 LED Dock Light, highlighting its 1700 lumen output and long-lasting LED technology.
Safety Information
Always follow basic safety precautions when installing or using electrical equipment to reduce the risk of fire, electric shock, and personal injury.
- Ensure the power supply is disconnected before installation, maintenance, or cleaning.
- This product is designed for 115v/120v electrical systems. Verify your power source matches these requirements.
- The unit is IP65 rated, meaning it is protected against dust ingress and low-pressure water jets from any direction. However, it is not designed for submersion.
- Mount the dock light securely to a stable surface capable of supporting its weight and the forces exerted by the folding arm.
- Do not look directly into the LED light source when it is illuminated, as this may cause eye strain or damage.
- Keep children and unauthorized personnel away from the installation area.
Package Contents
Verify that all components are present and undamaged before proceeding with installation.
- ProLight 111510 20W LED Dock Light with integrated 40" Folding Arm
- Mounting hardware (typically bolts, washers, nuts - specific types may vary)
- Power cord with plug
Setup and Installation
The ProLight 111510 is designed for wall or surface mounting. Ensure the mounting surface is structurally sound.
- Select Mounting Location: Choose a location that provides optimal illumination for the desired area, typically a loading dock or workspace. Ensure there is sufficient clearance for the 40-inch folding arm to extend and retract without obstruction.
- Mark Drill Holes: Position the mounting bracket of the dock light against the chosen surface. Use a pencil or marker to mark the locations for drilling mounting holes.
- Drill Holes: Using an appropriate drill bit for your mounting surface (e.g., concrete, wood, steel), drill pilot holes at the marked locations.
- Secure the Unit: Align the mounting bracket with the drilled holes. Insert the provided mounting hardware (bolts, washers, nuts) and securely fasten the dock light to the surface. Ensure all connections are tight to prevent movement or vibration.
- Connect Power: Plug the power cord into a compatible 115v/120v electrical outlet. Ensure the outlet is properly grounded.
Image: The ProLight 111510 dock light fully assembled and extended, showing the mounting bracket and power cord.
Operating Instructions
The ProLight 111510 is designed for straightforward operation.
- Power On/Off: Locate the integrated on/off switch on the head of the LED light fixture. Press the switch to turn the light on or off.
- Adjusting the Arm: The 40-inch steel arm is hinged for flexibility. Gently extend or fold the arm to position the light as needed. The arm provides superior rigidity to prevent sagging once positioned.
- Light Direction: The LED head can be swiveled or tilted to direct the 15-degree beam precisely where illumination is required.
Image: Close-up of the LED light head, illustrating the location of the on/off switch and the robust IP65 rated housing.
Image: The 40-inch folding arm of the dock light, demonstrating its extension capability for flexible positioning.
Maintenance
Regular maintenance ensures optimal performance and longevity of your dock light.
- Cleaning: Periodically clean the lens and exterior housing with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish or lens. Ensure the unit is unplugged before cleaning.
- Inspection: Regularly inspect the power cord for any signs of damage, fraying, or cuts. Check all mounting hardware for tightness and ensure the arm hinges operate smoothly.
- LED Life: The integrated LED bulb has an average lifespan of 50,000 hours and is not user-replaceable. If the LED fails, the entire light head may need servicing or replacement.
Troubleshooting
Refer to the following table for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the unit; Faulty switch; Damaged power cord. |
|
| Light is dim or flickers. | Unstable power supply; Loose connection; LED nearing end of life. |
|
| Moisture inside the lens. | Seal compromise; Extreme temperature fluctuations. |
|
Specifications
Detailed technical specifications for the ProLight 111510 LED Dock Light.
| Feature | Specification |
|---|---|
| Model Number | 111510 |
| Light Source | LED |
| Wattage | 20 Watts |
| Lumens | 1,700 Lumens |
| Voltage | 120 Volts |
| Amperage | 0.18 Amps |
| Lighting Range | 60 feet |
| Beam Angle | 15 degrees |
| Arm Length | 40 inches (folding steel arm) |
| IP Rating | IP65 (Dust-tight, protected against low-pressure water jets) |
| LED Lifespan | Approximately 50,000 hours |
| Material | Durable Steel (arm), Blend (housing) |
| Finish | Powder Coated |
| Color | Yellow |
| Item Weight | 11.25 pounds |
| Product Dimensions (Overall) | Height: 5.25", Length: 8.75", Width: 8.25" |
Image: Key electrical and light output specifications for the dock light.
Image: Physical dimensions of the ProLight 111510 LED Dock Light head and folded arm assembly.
Warranty
As per product information, there is no explicit warranty description provided for the ProLight 111510 LED Dock Light. Please refer to your point of purchase or contact the manufacturer directly for any warranty inquiries.
Support
For technical assistance, replacement parts, or further information regarding your ProLight 111510 LED Dock Light, please contact ProBuilt Professional Lighting, LLC. Contact details can typically be found on the manufacturer's official website or through your product retailer.
Manufacturer: ProBuilt Professional Lighting, LLC