Introduction
The Barbecook Nestor Original wood-fired table brazier and BBQ grill is designed to provide an enjoyable outdoor cooking experience. This versatile unit allows for grilling throughout the year and serves as a central gathering point in your garden. Its robust steel construction ensures durability, while thoughtful features enhance usability and maintenance.
Key features include a raised edge to prevent grease spills and food from falling, an integrated ash pan for easy cleaning, and ample storage space for wood and tools. The unit is also equipped with plastic feet to protect your patio from rust stains. The Nestor Original is compatible with Barbecook's Dynamic Centre accessories for expanded cooking possibilities.

Image: The Barbecook Nestor Original wood-fired table brazier BBQ grill in use, surrounded by people in a garden.
Setup Instructions
Before using your Barbecook Nestor Original, please follow these assembly and placement instructions carefully.
1. Unboxing and Component Check
- Carefully remove all components from the packaging.
- Verify that all parts listed in the assembly guide (not provided in this document, refer to product packaging) are present and undamaged.
2. Assembly
- Assemble the main body of the brazier according to the detailed instructions provided in the product's original assembly manual. Assembly typically takes around 30 minutes.
- Ensure all connections are secure and stable.
- Attach the cooking plates (if separate) to the top of the brazier.

Image: A person placing a component onto the Barbecook Nestor Original BBQ grill during assembly.
3. Placement
- Place the Barbecook Nestor Original on a stable, level, and non-combustible surface outdoors.
- Ensure adequate clearance from flammable materials, structures, and overhead obstructions.
- The integrated plastic feet protect your patio from rust stains, but always exercise caution.
4. Initial Preparation
- Before first use, clean the cooking surfaces with warm, soapy water and rinse thoroughly.
- Season the cooking plates by applying a thin layer of high-temperature cooking oil and heating the brazier for a short period. This helps create a non-stick surface and prevents rust.
Operating Instructions
Follow these steps for safe and effective operation of your wood-fired brazier.
1. Fueling the Brazier
- Use only dry, untreated wood as fuel. Hardwoods like oak, hickory, or fruitwoods are recommended for best results and flavor.
- Place kindling and smaller pieces of wood in the center of the brazier's fire bowl.
- Gradually add larger pieces of wood as the fire establishes.

Image: The Barbecook Nestor Original BBQ grill showing the integrated wood storage compartment.
2. Lighting the Fire
- Use a long lighter or firelighters to ignite the kindling.
- Allow the fire to burn for 20-30 minutes to create a bed of hot embers and heat the cooking plates evenly.
3. Cooking
- The cooking plates will heat up, with the hottest area closest to the fire and cooler areas towards the outer edge. This allows for different cooking temperatures.
- Place food directly on the cooking plates. The raised edge helps prevent food and grease from falling off.
- Adjust cooking temperature by moving food closer to or further from the center, or by adding/removing wood.

Image: Food, including bacon and bread, cooking on the carbon steel cooking plates of the Barbecook Nestor Original.

Image: A variety of vegetables and sausages being cooked on the Barbecook Nestor Original BBQ grill.
4. Safety Precautions
- Never leave the brazier unattended while in use.
- Keep children and pets away from the hot surfaces.
- Have a fire extinguisher or water source nearby.
- Allow the brazier to cool completely before attempting to clean or move it.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your Barbecook Nestor Original.
1. Cleaning the Cooking Plates
- After each use, once the plates have cooled slightly but are still warm, scrape off any food residue with a metal spatula.
- Wipe the plates clean with a damp cloth. For stubborn residue, use warm soapy water.
- Re-season the plates with a thin layer of cooking oil to prevent rust, especially if storing for extended periods.
2. Ash Removal
- Once the brazier is completely cool, remove the integrated ash pan.
- Dispose of ashes safely in a non-combustible container.
- Clean the ash pan and replace it.

Image: A hand removing the integrated ash collection pot from the Barbecook Nestor Original.
3. General Cleaning and Storage
- Wipe down the exterior of the brazier with a damp cloth to remove dirt and grime.
- Store the brazier in a dry, covered area when not in use, especially during adverse weather conditions, to prevent rust and prolong its lifespan.
Troubleshooting
This section addresses common issues you might encounter with your Barbecook Nestor Original.
| Problem | Possible Cause | Solution |
|---|---|---|
| Difficulty starting fire | Wood is damp; insufficient kindling; poor airflow. | Use dry wood. Ensure adequate kindling. Arrange wood to allow air circulation. |
| Uneven cooking temperature | Uneven distribution of embers; insufficient fuel. | Distribute embers evenly. Add more wood to maintain consistent heat. Utilize different temperature zones on the cooking plate. |
| Rust appearing on surfaces | Lack of seasoning; improper storage; exposure to moisture. | Regularly season cooking plates with oil. Store in a dry, covered area. Clean and dry thoroughly after each use. |
| Smoke excessive | Damp wood; fire not hot enough. | Ensure wood is dry. Allow fire to establish and burn hotter before cooking. |
Product Specifications
Detailed specifications for the Barbecook Nestor Original Wood-Fired Table Brazier BBQ Grill.
- Brand: Barbecook
- Model Name: Nestor Black
- Model Number: BC-WOO-6022
- Product Dimensions (D x W x H): 92 cm x 92 cm x 101 cm
- Item Weight: 62 Kilograms
- Material: Alloy Steel (Frame: Metal)
- Color: Black
- Fuel Type: Wood
- Special Features: Ash pan, Dynamic Centre accessory compatibility
- Cooking System: Grill with wood
- Grill Configuration: 2 plates, 91 cm² cooking surface area (total 8281 cm²)
- Recommended Uses: Outdoor
- Assembly Required: Yes
- Installation Type: Freestanding
- Country of Origin: Belgium

Image: A diagram illustrating the dimensions (92 cm width, 101 cm height) and weight (62.15 kg) of the Barbecook Nestor Original.
Warranty Information
The Barbecook Nestor Original Wood-Fired Table Brazier BBQ Grill comes with a 2-year manufacturer's warranty.
This warranty covers defects in materials and workmanship under normal use and service. It does not cover damage resulting from misuse, abuse, accidents, modifications, or improper maintenance. Please retain your proof of purchase for warranty claims.
For detailed terms and conditions, please refer to the warranty documentation included with your product or visit the official Barbecook website.
Customer Support
Should you require assistance with your Barbecook Nestor Original, please contact Barbecook customer support.
- For technical support, spare parts, or warranty claims, please visit the official Barbecook website.
- Have your model number (BC-WOO-6022) and proof of purchase ready when contacting support.
Note: Contact information may vary by region. Please check the Barbecook website for the most accurate and up-to-date contact details for your location.
