1. Product Overview
The ALIDE E26 12W LED Candelabra Bulbs are designed as energy-efficient replacements for traditional 100-watt incandescent bulbs. These LED corn light bulbs provide 1200 lumens of 4000K Natural White light, suitable for various fixtures such as ceiling fans, chandeliers, and pendant lighting. They feature a standard E26 medium base and are non-dimmable.
Image 1.1: ALIDE E26 12W LED Candelabra Bulbs (4-pack).
2. Key Features
- Energy Efficient: 12W LED replaces 100W incandescent, providing 1200 lumens.
- Light Color: 4000K Natural White with a high Color Rendering Index (CRI) of 82Ra.
- Beam Angle: 360-degree illumination.
- Durability: Designed for a long lifespan exceeding 35,000 hours, featuring a ceramic heat sink.
- Base Type: Standard E26 medium screw base.
- Non-Dimmable: Not compatible with dimmer switches.
- No Flicker: Engineered to provide stable, flicker-free lighting.
3. Safety Information
Please read and follow all safety instructions to prevent injury or damage.
- Power Disconnection: Always cut off power to the fixture before installing or removing bulbs.
- Base Compatibility: Ensure the fixture has an E26/E27 screw base. These bulbs are not compatible with E11, E12, or E17 bases.
- Non-Dimmable: Do not use these bulbs with dimmer switches. Doing so may cause damage to the bulb or the dimmer.
- Environment: Avoid use in humid environments or areas with high temperatures (above 40°C), such as ovens.
- Enclosed Fixtures: Not suitable for use in totally enclosed luminaries, as this can shorten bulb lifespan due to heat buildup.
- Voltage: Designed for 100-120 Volts, 60 Hertz.
4. Installation Guide
Follow these steps to install your ALIDE LED Candelabra Bulbs:
- Turn Off Power: Before starting, ensure the power supply to the light fixture is turned off at the circuit breaker or wall switch.
- Remove Old Bulb: Carefully unscrew the existing bulb from the fixture. Allow it to cool if it was recently in use.
- Verify Base Type: Confirm that your fixture uses an E26 medium screw base. Refer to Image 4.1 for visual guidance on base types.
- Install New Bulb: Gently screw the ALIDE E26 LED bulb into the socket until it is snug. Do not overtighten.
- Restore Power: Turn the power back on at the circuit breaker or wall switch.
- Test: Turn on the light switch to ensure the bulb is functioning correctly.
Image 4.1: Ensure your fixture has an E26 base. This diagram illustrates the correct E26 base and incompatible bases like E11, E12, and E14.
Image 4.2: Dimensions of the ALIDE E26 LED bulb, measuring 3.30 inches (84mm) in length and 1.18 inches (30mm) in width.
5. Operating Instructions
Operating the ALIDE E26 LED Candelabra Bulbs is straightforward:
- Power On/Off: Use the standard wall switch connected to your light fixture to turn the bulbs on or off.
- Non-Dimmable: These bulbs are designed for full brightness only and are not compatible with dimmer switches. Attempting to use them with a dimmer may result in flickering, damage, or reduced lifespan.
Image 5.1: Illustration emphasizing that the bulbs are non-dimmable and should not be used with dimmer switches.
6. Care and Maintenance
To ensure the longevity and optimal performance of your ALIDE LED bulbs, follow these simple maintenance guidelines:
- Cleaning: Before cleaning, ensure the power is off and the bulb is cool. Wipe the bulb with a soft, dry cloth. Do not use liquid or abrasive cleaners.
- Replacement: While designed for a long lifespan, if a bulb needs replacement, follow the installation steps outlined in Section 4.
- Storage: If storing unused bulbs, keep them in their original packaging in a cool, dry place.
7. Troubleshooting Common Issues
If you encounter any issues with your ALIDE LED bulbs, refer to the following troubleshooting tips:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up | No power to the fixture; Loose connection; Faulty bulb. | Check circuit breaker and wall switch. Ensure bulb is screwed in tightly. Test with a known working bulb. |
| Bulb flickers | Incompatible dimmer switch; Loose connection; Voltage fluctuations. | Ensure no dimmer switch is in use (these bulbs are non-dimmable). Tighten the bulb. Check household wiring for stability. |
| Light output is too low | Incorrect bulb wattage for desired brightness; Environmental factors. | Verify the bulb's lumen output meets your needs. Ensure bulbs are not in enclosed fixtures that restrict light. |
Image 7.1: The ALIDE LED bulbs are designed to be flicker-free, providing comfortable illumination.
8. Technical Specifications
| Specification | Value |
|---|---|
| Brand | ALIDE |
| Model Name | AGU10435 |
| Item Model Number | ALDE264 |
| Light Type | LED |
| Bulb Base | E26 |
| Wattage | 12 Watts |
| Incandescent Equivalent Wattage | 100 Watts |
| Brightness | 1200 Lumens |
| Light Color | Natural White |
| Color Temperature | 4000 Kelvin |
| Color Rendering Index (CRI) | 82 |
| Beam Angle | 360 Degrees |
| Special Feature | Non Dimmable |
| Voltage | 120 Volts (100 to 120 Volts and 60 Hertz) |
| Material | Ceramic |
| Average Life | Over 35,000 hours (approx. 3.8 Years based on 2.7 hrs/day) |
| Indoor/Outdoor Usage | Indoor |
| Item Weight | 9.9 ounces (for 4-pack) |
| Package Dimensions | 6.22 x 4.41 x 1.38 inches |
9. Warranty and Customer Support
For warranty information or customer support, please contact ALIDE directly through their official channels or the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.