PHILIPS 10671191

Philips OneBlade Face Razor

Model: QP2721/20, 10671191

Important Safety Information

Please read this user manual carefully before you use the appliance and save it for future reference. Always follow basic safety precautions when using electrical appliances.

  • This appliance is water-resistant and can be used in the shower. For safety, only use the appliance wirelessly when wet.
  • Do not use the appliance if it is damaged.
  • Keep the appliance and charger dry. Do not immerse the charger in water.
  • Keep out of reach of children.
  • Only use the original charger provided with the appliance.
  • Do not use the appliance for any purpose other than its intended use.

Product Overview

The Philips OneBlade is designed for trimming, edging, and shaving any length of hair. It features a fast-moving cutter (200x per second) with a dual protection system, giving you an efficient and comfortable shave on longer hairs.

What's in the Box

  • Philips OneBlade Handle
  • OneBlade Blade
  • Adjustable 5-in-1 Comb
  • Charger
Philips OneBlade razor with adjustable comb

Image: Philips OneBlade razor with its adjustable 5-in-1 comb attachment. The razor is black and yellow, and the comb is black.

Setup

Charging the OneBlade

  1. Ensure the OneBlade is dry before charging.
  2. Connect the charger to the OneBlade and plug it into a wall outlet.
  3. Charge the OneBlade for at least 8 hours before the first use to ensure full battery capacity. Subsequent charges may take less time.
  4. The charging indicator light will show the charging status (refer to product specific light behavior if available, otherwise general).

Attaching the Adjustable Comb

  • Align the adjustable comb with the blade.
  • Push the comb onto the blade until it clicks into place.
  • To remove, gently pull the comb away from the blade.

Operating Instructions

Trimming and Shaving

  1. Prepare your skin: You can use the OneBlade on dry or wet skin, with or without shaving foam/gel. For best results and comfort, wet your face and apply shaving foam or gel.
  2. Select comb length: If trimming, choose the appropriate comb for your desired beard length (1mm, 2mm, 3mm, 4mm, or 5mm) by adjusting the dial on the comb.
  3. Power on: Press the power button to turn on the OneBlade.
  4. Glide the OneBlade: Glide the OneBlade over your face in the direction of your hair growth. For a closer shave, use short, quick strokes against the grain. The blade is designed to follow the contours of your face.
  5. Edging: For precise edges, remove the comb and use the blade directly against the skin.
  6. Power off: Press the power button again to turn off the OneBlade when finished.
Man using Philips OneBlade to shave his beard

Image: A man using the Philips OneBlade to trim his beard in front of a mirror.

Maintenance

Cleaning

  1. After each use, turn off the OneBlade.
  2. Remove the blade from the handle.
  3. Rinse the shaver head and the comb under running water until all hair and debris are removed.
  4. Shake off excess water and allow the blade and comb to air dry completely before reattaching or storing.
  5. Wipe the handle with a damp cloth if needed. Do not use abrasive cleaning agents.

Blade Replacement

For optimal performance, it is recommended to replace the OneBlade blade every 4 months, or sooner if the blade appears dull or damaged. Replacement blades are available from Philips retailers.

Storage

Store the OneBlade in a cool, dry place when not in use. Ensure the blade is clean and dry before storing. You can use the protective cap (if included) to cover the blade.

Troubleshooting

ProblemPossible CauseSolution
Appliance does not turn on.Battery is empty or not charged.Charge the appliance for at least 8 hours.
Poor shaving/trimming performance.Blade is dull or clogged with hair.Clean the blade thoroughly or replace it. Ensure the comb is correctly attached.
Skin irritation after use.Incorrect technique or sensitive skin.Ensure you are gliding the OneBlade smoothly. Use shaving foam/gel. If irritation persists, consult a dermatologist.

Specifications

BrandPHILIPS
Model Number10671191 (QP2721/20)
Power SourceCorded Electric (for charging)
Battery LifeUp to 50 minutes (after full charge)
Blade MaterialStainless Steel
Head TypeRotary (OneBlade technology)
Included ComponentsCharger, Adjustable 5-in-1 Comb
Product Dimensions50 x 50 x 28 cm; 260 g
Special Feature5-in-1 Comb, Wet & Dry Use

Warranty and Support

Philips offers a manufacturer's warranty for this product. Please refer to the warranty card included in your product packaging for specific terms and conditions, or visit the official Philips website for detailed warranty information and product registration.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Philips customer service. Contact details can typically be found on the Philips website or in your product documentation.

Legal Disclaimer

Actual product packaging and materials may contain more and different information than what is shown on our website. We recommend that you do not rely solely on the information presented and that you always read labels, warnings, and directions before using or consuming a product.

© 2024 PHILIPS. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.