Hodozzy 9310W 2 Din Car Stereo User Manual

Introduction

Thank you for choosing the Hodozzy 9310W 2 Din Car Stereo. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and user experience. Please read this manual thoroughly before using the device and keep it for future reference.

Package Contents

Upon unpacking, please verify that all items listed below are present and in good condition:

• 1 x Hodozzy 9310W Car MP5 Player
• 1 x Power Cable
• 1 x USB Cable
• 1 x Antenna Head
• 1 x Remote Control
• 1 x 2 Din Frame
• 1 x User Manual
• 1 x Mounting Bracket
• 4 x Screws
• 1 x Microphone
• 1 x Reversing Camera

Image: Hodozzy 9310W Car Stereo package contents, showing the main unit, power cable, USB cable, antenna, remote control, frame, user manual, mounting bracket, screws, microphone, and reversing camera.

Setup and Installation

Wiring Diagram

Refer to the following diagram for proper wiring connections. Incorrect wiring can damage the device or your vehicle's electrical system. If you are unsure, consult a professional installer.

Image: Back interface of the Hodozzy 9310W Car Stereo, detailing connections for power (16-pin), AV input/output, subwoofer output, USB 1/2, radio antenna, microphone input, protocol box plug, and reversing video input.

• Power Cable: Connect the yellow wire to the constant 12V power supply, the red wire to the accessory (ACC) 12V power supply, and the black wire to ground.
• Speaker Wires: Connect the speaker wires to your vehicle's speakers, ensuring correct polarity for each channel (Front Left, Front Right, Rear Left, Rear Right).
• Reversing Camera Input: Connect the reversing camera's video output to the 'Reversing Video Input' port. Connect the camera's power to the vehicle's reverse light circuit.
• USB Ports: Use the USB 2.0 ports for media playback, smartphone charging, or connecting a designated USB DVR.
• AUX Input: Connect external audio devices via the AUX input.
• Microphone: Connect the external microphone for improved call quality during hands-free operation.
• Radio Antenna: Connect your vehicle's radio antenna to the 'RADIO ANT' port.

Mounting

Install the mounting brackets to the sides of the car stereo using the provided screws. Slide the unit into the 2 Din opening in your vehicle's dashboard until it clicks into place. Secure the unit using the mounting frame and screws.

Operating Instructions

Basic Operations

• Power On/Off: Press the power button on the front panel or remote control.
• Volume Control: Use the volume knob or buttons on the front panel/remote to adjust the sound level.
• Touchscreen: Navigate through menus and functions by touching the 7-inch display.

Wireless CarPlay and Android Auto

This unit supports wireless CarPlay for iPhone and wireless Android Auto for Android phones, allowing seamless integration of your smartphone's features.

1. Ensure Bluetooth is enabled on your smartphone.
2. On the car stereo, go to the CarPlay/Android Auto application.
3. Search for and select your car stereo's Bluetooth name on your phone.
4. Confirm the pairing code on both devices.
5. Once connected, CarPlay or Android Auto will launch automatically.

Image: The car stereo screen showing the main interface with options for Wireless CarPlay, Wireless Android Auto, and Mirror Link. Below, examples of CarPlay, Android Auto, and Mirror Link interfaces are displayed.

Mirror Link Function

Mirror Link allows you to display your smartphone's screen directly on the car stereo's display via a USB cable.

1. Connect your smartphone to the car stereo using an original USB cable.
2. Follow the on-screen prompts on both your phone and the car stereo to enable screen mirroring.

Bluetooth Connectivity

The integrated Bluetooth 5.1 module enables hands-free calling and wireless audio streaming.

1. Enable Bluetooth on your smartphone.
2. On the car stereo, navigate to the Bluetooth menu.
3. Search for available devices and select the car stereo's Bluetooth name.
4. Confirm the pairing. You can now make/receive calls and play music wirelessly.

Image: The top section shows the Bluetooth interface for pairing devices, making calls, and accessing music and address book. The bottom section displays the EQ System settings with a 10-band equalizer and preset sound modes like Jazz, Classic, Rock, Pop, and User.

FM Radio

Access FM radio stations with clear reception and 18 preset memory slots.

• Auto Scan: The unit can automatically scan and save strong FM stations.
• Manual Tuning: Manually tune to desired frequencies.
• Preset Stations: Save your favorite stations to the 18 preset buttons for quick access.

Image: The top section illustrates the FM Radio interface, showing frequency display (87.50 MHz), signal strength, and preset station buttons (P1-P6). The bottom section shows the Steering Wheel Control (SWC) setup menu, allowing users to program various functions to their vehicle's steering wheel buttons.

Steering Wheel Controls (SWC)

If your vehicle supports steering wheel controls, you can configure them to operate the car stereo for convenience and safety.

1. Access the 'Steering Wheel Controls' settings menu.
2. Follow the on-screen instructions to map your steering wheel buttons to specific functions (e.g., volume up/down, next/previous track, mode).

Reversing Camera Function

The included reversing camera provides a clear view of the area behind your vehicle, enhancing safety during parking and reversing maneuvers.

• When the vehicle is shifted into reverse gear, the car stereo will automatically display the camera feed on the screen.
• The display includes parking guidelines to assist with precise maneuvering.

Image: The top section shows the reversing camera view on the car stereo screen, complete with parking guidelines and a clear image of the rear environment. The bottom section illustrates the 7-color light support, allowing users to customize the button illumination colors.

EQ System

Adjust the audio output to your preference using the built-in 10-band equalizer and various preset sound effects (Jazz, Classic, Rock, Pop, User).

UI Customization

Personalize your car stereo's appearance:

• Backlight Settings: Choose from 7 different button illumination colors or set them to cycle automatically.
• Wallpapers: Select from various themed UI wallpapers.

Maintenance

• Screen Cleaning: Use a soft, lint-free cloth to gently wipe the touchscreen. Avoid abrasive cleaners or solvents.
• General Care: Keep the unit free from dust and moisture. Do not expose it to extreme temperatures.
• Software Updates: Check the official Hodozzy website for any available software updates to ensure optimal performance and new features.

Troubleshooting

Specifications

Dimensions

Image: Diagram showing the dimensions of the Hodozzy 9310W car stereo. The front panel measures 178mm (7.0 inches) in width and 102mm (4.0 inches) in height. The main body has a width of 176mm (6.9 inches), a height of 89mm (3.5 inches), and a depth of 50mm (2.0 inches).

Warranty Information

The Hodozzy 9310W Car Stereo comes with a 2-year replacement warranty. This warranty covers manufacturing defects and ensures that your product will be replaced if it fails due to such issues within two years from the date of purchase. Please retain your proof of purchase for warranty claims.

Customer Support

For any questions, technical assistance, or warranty claims, please contact Hodozzy customer support. We offer lifetime support for our products.

• Email: hodozzyofficial@163.com
• Response Time: We aim to respond to inquiries within 18 hours.