1. Introduction
Thank you for choosing the Philips Kosipo 4-Light Surface Mounted Spotlight. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.
Figure 1: Front view of the Philips Kosipo 4-Light Surface Mounted Spotlight.
2. Safety Information
WARNING: To avoid electric shock, fire, or injury, always turn off the power at the circuit breaker or fuse box before installation, servicing, or cleaning.
- Ensure the main power supply is disconnected before commencing any work.
- Installation must be performed by a qualified electrician or a person with electrical knowledge.
- This product is designed for indoor use only.
- Do not exceed the maximum wattage specified for the bulbs.
- Keep packaging materials away from children.
- Do not modify the fixture in any way.
3. Package Contents
Verify that all components are present and undamaged before installation:
- Philips Kosipo 4-Light Surface Mounted Spotlight fixture (1 unit)
- Mounting bracket and hardware
- Instruction Manual
Note: GU10 bulbs are not included and must be purchased separately.
Figure 2: Product packaging, illustrating the included light bar and mounting hardware.
4. Setup and Installation
The Philips Kosipo spotlight features an easy ClickFix installation system.
4.1 Pre-Installation
- Turn off power: Locate the circuit breaker or fuse box and turn off the power to the area where you will be installing the fixture.
- Prepare tools: You will need a screwdriver, wire strippers, and possibly a drill.
- Unpack: Carefully remove the fixture and all components from the packaging.
4.2 Mounting the Fixture (ClickFix System)
- Attach the bracket: Secure the mounting bracket to the ceiling using the provided screws. Ensure it is firmly attached to a joist or suitable ceiling support.
- Connect wiring: Connect the household electrical wires to the fixture's wires according to local electrical codes. Typically, this involves connecting live to live (black/brown), neutral to neutral (white/blue), and ground to ground (green/yellow).
- Attach the fixture: Once wiring is complete, align the fixture with the mounting bracket and push it into place until it clicks securely. The ClickFix system simplifies this step, allowing for easy, single-person installation.
Figure 3: Visual representation of the easy installation process, showing the fixture being attached to the ceiling bracket.
4.3 Installing GU10 Bulbs
- Ensure power is still off.
- Insert a GU10 bulb into each spotlight socket. Align the two pins of the GU10 bulb with the holes in the socket.
- Push the bulb gently into the socket and twist clockwise until it is secure.
- Repeat for all four spotlights.
Figure 4: The Philips Kosipo spotlight installed and illuminating a wall, demonstrating its lighting effect.
5. Operating Instructions
5.1 Turning On/Off
Once installed and bulbs are in place, restore power at the circuit breaker. The spotlight can then be operated using your standard wall switch.
5.2 Adjusting the Spotlights
Each of the four spotlight heads is rotatable. You can individually adjust the direction of each light to highlight specific areas or create desired lighting effects in your room.
Figure 5: The Philips Kosipo spotlight providing illumination in a kitchen setting, showcasing its functional design.
6. Maintenance
6.1 Cleaning
To clean the fixture, ensure the power is off. Use a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish.
6.2 Bulb Replacement
Always turn off the power before replacing bulbs. Allow bulbs to cool completely before handling. To replace a GU10 bulb, gently push it in and twist counter-clockwise to remove. Insert a new GU10 bulb by aligning the pins, pushing gently, and twisting clockwise until secure.
7. Troubleshooting
- Light does not turn on:
- Check if the power switch is on.
- Verify that the circuit breaker has not tripped.
- Ensure bulbs are correctly installed and not faulty.
- Check electrical connections for looseness (only by a qualified electrician).
- Flickering light:
- Ensure bulbs are fully screwed in.
- Replace the bulb to check if it's faulty.
- Consult a qualified electrician if the issue persists.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | Philips |
| Model Number | 46515200 |
| Product Dimensions | 9.2 x 62.8 x 7 cm (Height x Length x Width) |
| Item Weight | 1.47 kg |
| Light Type | LED (compatible) |
| Bulb Base | GU10 |
| Max Wattage (per bulb) | 5.5 Watts (LED equivalent to 40W incandescent) |
| Special Features | Energy efficient, Rotatable heads, Easy ClickFix installation |
| Intended Use | Indoor, Home |
| Color (Fixture) | White |
Figure 6: Technical drawing showing the dimensions of the Philips Kosipo 4-Light Surface Mounted Spotlight.
9. Warranty and Support
Philips products are designed and manufactured to the highest quality standards. For detailed warranty information and customer support, please refer to the warranty card included with your product or visit the official Philips website.
You can also find additional support and FAQs on the Philips Store on Amazon.
