Introduction
The GIZMORE TWS 809 Pro earbuds are designed to provide a high-quality audio experience with advanced features. These earbuds offer seamless connectivity, clear sound, and a comfortable fit for extended use. This manual provides detailed instructions on how to set up, operate, and maintain your earbuds.
What's in the Box
- GIZMORE TWS 809 Pro Earbuds
- Wireless Charging Case
- Charging Cable (Type-C)
Product Overview
The GIZMORE TWS 809 Pro earbuds feature a featherlite snug fit design for comfort and are equipped with 13mm high-fidelity composite drivers for immersive sound. The charging case provides additional battery life and protects the earbuds.
Image: GIZMORE TWS 809 Pro Earbuds and Charging Case, showcasing both black and white color options.
Key Features:
- ENC (Environmental Noise Cancellation): For clear audio during calls.
- Bluetooth 5.3: Ensures stable and fast wireless connectivity.
- 13mm High FID Composite Drivers: Delivers detailed and accurate audio reproduction.
- Single Touch Voice Assistant: Activate your device's voice assistant with a simple touch.
- Instant Pairing: Quick and effortless connection to compatible devices.
- Up to 20 Hours Playtime: Extended listening with the charging case.
- Type-C Rapid Charge: Fast charging capability for minimal downtime.
Setup
1. Initial Charging
Before first use, fully charge the earbuds and the charging case. Connect the provided Type-C charging cable to the charging port on the case and a power source. The indicator light on the case will show charging status.
Image: The GIZMORE TWS 809 Pro charging case being charged via a Type-C cable, illustrating the rapid charge feature.
2. Power On/Off
- Power On: Open the charging case, and the earbuds will automatically power on.
- Power Off: Place the earbuds back into the charging case and close the lid. They will automatically power off and begin charging.
3. Bluetooth Pairing
- Ensure the earbuds are charged and inside the charging case.
- Open the charging case. The earbuds will enter pairing mode, indicated by a flashing LED light.
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "GIZMORE TWS 809 Pro" from the list of devices.
- Once connected, the LED indicator on the earbuds will stop flashing, and you will hear a confirmation tone.
Operating Instructions
Touch Controls
The earbuds feature touch-sensitive controls for easy management of music, calls, and voice assistant.
- Play/Pause: Single tap on either earbud.
- Next Track: Double tap the right earbud.
- Previous Track: Double tap the left earbud.
- Answer/End Call: Single tap on either earbud.
- Reject Call: Press and hold either earbud for 2 seconds.
- Activate Voice Assistant: Triple tap on either earbud.
Charging the Earbuds and Case
- Earbuds: Place the earbuds into the charging case. They will automatically charge from the case's internal battery.
- Charging Case: Connect the Type-C cable to the case and a power adapter. A 15-minute charge can provide approximately 100 minutes of playback.
Image: The GIZMORE TWS 809 Pro earbuds highlighting their total playback time of up to 20 hours with the charging case.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the earbuds and charging case. Avoid using harsh chemicals or abrasive materials.
- Storage: When not in use, store the earbuds in their charging case to protect them from dust and damage.
- Water Resistance: The earbuds are IPX4 water-resistant, meaning they are protected against splashing water from any direction. They are not designed for submersion in water.
Troubleshooting
| Problem | Solution |
|---|---|
| Earbuds not pairing | Ensure earbuds are charged. Turn off and on Bluetooth on your device. Reset earbuds by placing them in the case, closing, then reopening. |
| No sound from one earbud | Check battery level of both earbuds. Re-pair the earbuds with your device. Ensure both earbuds are properly seated in the charging case for connection. |
| Charging case not charging | Verify the charging cable is securely connected to both the case and the power source. Try a different charging cable or adapter. |
| Voice Assistant not responding | Ensure your device's voice assistant is enabled and configured. Check the touch control settings for voice assistant activation. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | GIZMORE TWS 809 Pro |
| Connectivity Technology | Wireless (Bluetooth 5.3) |
| Ear Placement | In Ear |
| Form Factor | In Ear |
| Drivers | 13mm High FID Composite Drivers |
| Playtime | Up to 20 hours (with charging case) |
| Charging Time | 15 minutes for 100 minutes playback |
| Control Type | Touch, Voice Control |
| Water Resistance Level | IPX4 (Water Resistant) |
| Material | Plastic |
| Item Weight | 30 Grams |
| Product Dimensions | 5.2 x 2.3 x 4.6 cm |
| Included Components | Cable, Wireless Charging Case |
Video Demonstrations
Video: An overview of the GIZMORE TWS 809 Pro earbuds, showcasing their design, features like AAC Codec, ENC Noise Reduction, and playtime. This video provides a visual guide to the product's capabilities.
Warranty and Support
The GIZMORE TWS 809 Pro earbuds come with a 6-month warranty from the date of purchase. For any support inquiries, troubleshooting assistance, or warranty claims, please contact GIZMORE customer service through their official channels or the retailer where the product was purchased.