Introduction
This manual provides essential information for the safe and effective use of your HOBAYS 20-Pack 3.3ft 20 LED Warm White Fairy Lights. These battery-operated string lights are designed for decorative purposes, offering a warm white glow for various indoor and outdoor settings. Please read these instructions thoroughly before initial use and retain them for future reference.
Safety Information
- Battery Safety: Use only CR2032 batteries as specified. Do not mix old and new batteries. Ensure correct polarity (+/-). Remove batteries if the product is not used for an extended period.
- Water Resistance: The copper wire string lights are IP65 waterproof, suitable for outdoor use. However, the battery case is NOT waterproof. Protect the battery case from moisture and direct water exposure.
- Heat: The LED lights operate at a low voltage (3V) and produce minimal heat, making them safe to touch.
- Children and Pets: Keep small parts, especially batteries, out of reach of children and pets to prevent choking hazards.
- Handling: The copper wire is flexible but can be damaged if bent excessively or repeatedly at the same point. Handle with care.
Package Contents
Your package includes:
- 20 x HOBAYS 3.3ft 20 LED Warm White Fairy Lights (each with pre-installed CR2032 batteries)
- 1 x Small Screwdriver (for battery replacement)
Image: The complete HOBAYS 20-pack of fairy lights, showing each individual battery box connected to a coiled copper wire string of LEDs.
Specifications
| Feature | Detail |
|---|---|
| LED Color | Warm White (2700 Kelvin) |
| LED Quantity per String | 20 LEDs |
| String Length | 3.3 feet (approx. 1 meter) |
| LED Spacing | 2 inches (approx. 5 cm) |
| Wire Material | Copper |
| Power Source | Battery Powered (2 x CR2032 per string, included) |
| Voltage | 3 Volts |
| Waterproof Rating | IP65 (copper wire part only; battery case is NOT waterproof) |
| Battery Life | More than 72 hours of continuous illumination |
| Control Method | On/Off Switch on battery case |
Image: Detailed view of the battery case, including dimensions (2x0.87 inches), ON/OFF switch, and the 3.3ft copper wire with 20 LEDs. A small screwdriver is also shown as included.
Image: A graph illustrating the long-lasting brightness of HOBAYS fairy lights compared to other products, showing sustained illumination for over 72 hours.
Setup
- Unpack: Carefully remove each fairy light string from its packaging. Each string is individually coiled and secured.
- Activate Batteries: Each battery case has a small plastic tab inserted to prevent battery drain during shipping. Locate the ON/OFF switch on the battery case. Gently slide the switch to the 'ON' position. If the lights do not illuminate, carefully pull out the small plastic tab located near the switch. This tab isolates the battery.
- Test: After removing the tab, slide the switch to 'ON' to ensure the lights function correctly.
- Shape: The copper wire is highly flexible. Gently uncoil and shape the string lights as desired for your decoration.
Image: A close-up of the battery case, illustrating the internal CR2032 batteries and the protective plastic tab that must be removed to activate the lights.
Operating Instructions
Each fairy light string is operated independently via a simple ON/OFF switch located on its battery case.
- To Turn On: Slide the switch on the battery case to the 'ON' position.
- To Turn Off: Slide the switch on the battery case to the 'OFF' position.
Usage Scenarios
The flexible copper wire and compact battery case allow for versatile decoration. Consider these applications:
- Mason Jars: Coil the lights inside mason jars for charming table centerpieces.
- Floral Arrangements: Weave the lights through artificial or dried flowers to add a soft glow.
- Shelves and Mantels: Drape along shelves, mantels, or picture frames for accent lighting.
- Craft Projects: Integrate into various DIY craft projects due to their small size and flexibility.
- Outdoor Decor: Use the waterproof wire part to decorate plants, small bushes, or outdoor features, ensuring the battery case remains protected from water.
Image: Examples of how the flexible fairy lights can be shaped and used in various decorative settings, such as inside jars and around objects.
Image: Demonstrates the IP65 waterproof rating of the copper wire, with lights submerged in water. Also shows children safely interacting with the low-heat LEDs.
Image: Various applications of the mini LED fairy lights for creating a romantic atmosphere, such as decorating walls, vases, and candles.
Maintenance
- Battery Replacement: When the lights dim or stop working, it's time to replace the batteries. Use the included screwdriver to open the battery compartment on the back of the battery case. Replace the two CR2032 batteries, ensuring correct polarity. Securely close the compartment.
- Cleaning: Wipe the copper wire and LEDs with a soft, dry cloth. Avoid using abrasive cleaners or submerging the battery case in water.
- Storage: When not in use, turn off the lights and store them in a cool, dry place. You may gently re-coil the wires for compact storage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. | 1. Battery tab not removed. 2. Batteries are dead or inserted incorrectly. 3. Switch is in 'OFF' position. | 1. Remove the plastic battery tab. 2. Replace batteries with new CR2032 cells, ensuring correct polarity. 3. Slide the switch to 'ON'. |
| Lights are dim. | Batteries are low. | Replace batteries with new CR2032 cells. |
| Some LEDs are not working. | Damaged wire or LED. | Inspect the wire for kinks or breaks. If a specific LED is damaged, the entire string may need replacement as individual LEDs are not user-replaceable. |
Official Product Video
Watch this official product video from HOBAYS for a visual guide on the fairy lights.
Video: HOBAYS presents the 20 Pack 20 LED Fairy Lights, showcasing their features and potential uses.
Warranty and Support
For any product inquiries, technical support, or warranty claims, please contact HOBAYS customer service through the retailer's platform where the purchase was made. Please retain your proof of purchase for warranty validation.