1. Product Overview
The gesobyte Indoor TV Antenna is designed to provide access to free over-the-air (OTA) digital television broadcasts, including Full HD 1080p and 4K channels. It features an amplified signal booster with a Smart IC Chip for enhanced reception and filtering of cellular and FM signals. The antenna comes with an 18 ft coaxial cable and a USB AC adapter for flexible placement and power options.
Figure 1: gesobyte Indoor TV Antenna components, including the antenna panel, amplifier, coaxial cable, and USB power adapter.
2. Package Contents
- gesobyte Indoor TV Antenna
- Amplifier Signal Booster with Smart Switch (Short Range / Long Range)
- 18 ft Coaxial Cable
- USB AC Power Adapter
- Instruction Manual (this document)
3. Safety Instructions
- Do not expose the antenna or its components to rain or moisture.
- Avoid placing the antenna near heat sources or in direct sunlight for extended periods.
- Ensure all connections are secure before powering on.
- Do not attempt to disassemble or modify the antenna or amplifier. This will void the warranty.
- Keep out of reach of children.
4. Setup Guide
4.1 Connecting the Antenna
- Connect the coaxial cable from the antenna to the 'ANT/IN' or 'CABLE/ANT IN' port on the back of your television or digital converter box.
- Connect the amplifier to the coaxial cable.
- Connect the USB power adapter to the amplifier and plug it into a standard wall outlet or a USB port on your TV.
Figure 2: Connection diagram for the gesobyte Indoor TV Antenna to a television or digital converter box.
4.2 Positioning the Antenna
Optimal antenna placement is crucial for signal reception. Consider the following:
- Window Placement: Placing the antenna on or near a window often yields the best results as it minimizes obstructions.
- Wall Placement: If a window is not feasible, try placing it high on a wall.
- Behind the TV / On the Table: These locations may work but might result in weaker signals depending on your proximity to broadcast towers and surrounding obstacles.
Figure 3: Recommended and alternative placement options for the indoor antenna.
Use online tools or apps to locate broadcast towers in your area to help determine the best direction for your antenna.
5. Operating Instructions
5.1 Scanning for Channels
- After connecting and positioning the antenna, turn on your television.
- Access your TV's menu and navigate to 'Channel Scan', 'Auto Program', or 'Auto Tune'. The exact name may vary by TV model.
- Select 'Antenna' or 'Air' as the input source, not 'Cable'.
- Initiate the channel scan. This process may take several minutes.
- Once the scan is complete, your TV will display the available channels.
Note: Always rescan for channels if you move the antenna to a new location or if you experience signal loss.
5.2 Using the Amplifier Smart Switch
The amplifier features a Smart Switch with 'Short Range' and 'Long Range' settings. Adjust this switch based on your distance from broadcast towers:
- Short Range: Use this setting if you are close to broadcast towers (typically within 35 miles) to prevent signal overload.
- Long Range: Use this setting if you are further away from broadcast towers (up to 600 miles) to boost weaker signals.
Experiment with both settings to find the one that provides the best reception for your location.
Figure 4: The amplifier with its Smart Switch for range adjustment and integrated Smart IC Chip for signal processing.
6. Maintenance
- Clean the antenna surface with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Ensure the coaxial cable is not bent sharply or pinched, as this can damage the internal wiring and affect signal quality.
- Regularly check all connections to ensure they are secure.
Figure 5: Cross-section view of the 18 ft high-performance coaxial cable, highlighting its durable construction and signal quality features.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No channels found or poor signal quality. | Incorrect antenna placement, amplifier setting, or TV input. |
|
| Picture pixelates or freezes. | Weak signal or interference. |
|
| Some channels are missing. | Directional signal or local broadcast changes. |
|
8. Specifications
| Model Number | GSB23-250 |
| Brand | gesobyte |
| Color | Black |
| Impedance | 75 Ohm |
| Maximum Range | Up to 600 miles (with amplifier) |
| Coaxial Cable Length | 18 ft |
| Supported Resolutions | 4K, 1080p, 720p, etc. |
| UPC | 850027296517 |
9. Warranty and Support
gesobyte products are designed for reliability and performance. For warranty information or technical support, please contact gesobyte customer service. Refer to the product packaging or the official gesobyte website for the most current contact details.
Our team of TV tech professionals is available to assist you with any problems or questions regarding your HDTV Antenna.
