Partzer Right Passenger Side HID Headlight Assembly User Manual

1. Product Overview

This manual provides instructions for the installation, operation, and maintenance of your new Partzer Right Passenger Side HID Headlight Assembly. This headlight is designed as a direct replacement for the original equipment on specified Chevrolet Equinox models.

Image 1.1: Front view of the Partzer Right Passenger Side HID Headlight Assembly.

2. Compatibility

This headlight assembly is compatible with the following vehicles:

• 2018 Chevrolet Equinox LT (HID Type With LED DRL Without D5S Bulb)
• 2019 Chevrolet Equinox LT (HID Type With LED DRL Without D5S Bulb)
• 2020 Chevrolet Equinox LT (HID Type With LED DRL Without D5S Bulb)
• 2021 Chevrolet Equinox LT (HID Type With LED DRL Without D5S Bulb)

Replacement Part Numbers: GM2503470, 84428286, 84818200.

Important: Please verify your vehicle's compatibility and existing headlight type (HID with LED DRL, without D5S bulb) before installation.

3. Package Contents

The package includes:

• 1 x Right HID Headlight Assembly

4. Safety Information

Always prioritize safety when working on your vehicle. Failure to follow safety precautions can result in injury or damage to the vehicle.

• Ensure the vehicle is turned off and the battery is disconnected before beginning any electrical work.
• Wear appropriate personal protective equipment, including safety glasses and gloves.
• If you are unsure about any step of the installation process, consult a qualified automotive technician.
• HID systems operate at high voltages. Exercise extreme caution when handling HID components.

5. Setup and Installation

Installation of this headlight assembly typically involves removing the old unit and connecting the new one. While specific steps may vary by vehicle, the general procedure is as follows:

1. Preparation: Park the vehicle on a level surface, engage the parking brake, and disconnect the negative terminal of the battery.
2. Access: Depending on your vehicle model, you may need to remove the front bumper or fender liner to access the headlight mounting bolts.
3. Remove Old Headlight: Locate and remove all mounting bolts/screws securing the existing headlight assembly. Carefully disconnect the electrical connectors and any other attachments.
4. Install New Headlight: Position the new Partzer headlight assembly into place. Ensure all mounting points align correctly.
5. Connect Wiring: Reconnect all electrical connectors to the new headlight assembly. Ensure connections are secure.
6. Secure Headlight: Reinstall all mounting bolts/screws to secure the new headlight assembly.
7. Reassemble: Reinstall any removed bumper or fender liner components.
8. Final Check: Reconnect the battery. Test all headlight functions (low beam, high beam, turn signal, DRL) before driving.

Image 5.1: Detailed view of the electrical connector for the headlight assembly.

Image 5.2: Rear view of the headlight assembly, illustrating mounting points and access for bulb replacement or adjustment.

Headlight Aiming Adjustment

After installation, it is recommended to check and adjust the headlight aim to ensure proper illumination and avoid blinding oncoming drivers. Consult your vehicle's service manual for specific aiming procedures.

Image 5.3: Close-up of the adjustment mechanisms on the rear of the headlight for aiming.

6. Operating Instructions

This headlight assembly functions identically to the original equipment. It features High-Intensity Discharge (HID) main beams and integrated LED Daytime Running Lights (DRL).

• Low Beams: Activated via your vehicle's headlight switch. Provides primary illumination for night driving.
• High Beams: Activated via your vehicle's high beam stalk. Provides additional illumination for clear visibility when needed.
• Daytime Running Lights (DRL): These LEDs are designed to illuminate automatically when the vehicle is running, enhancing visibility during daylight hours.
• Turn Signal: The integrated amber reflector functions as the turn signal.

Image 6.1: Close-up view of the HID projector lens, responsible for the main beam illumination.

Image 6.2: Close-up of the amber reflector for the turn signal and the integrated LED Daytime Running Light strip.

7. Maintenance

Proper maintenance ensures the longevity and performance of your headlight assembly.

• Cleaning: Regularly clean the outer lens with a soft cloth and mild automotive-safe cleaner to remove dirt and debris. Avoid abrasive cleaners or harsh chemicals that can damage the polycarbonate lens.
• Inspection: Periodically inspect the headlight for any signs of damage, cracks, or moisture intrusion. Ensure all electrical connections remain secure.
• Bulb Replacement: This assembly is designed for HID bulbs (D5S type is not included). If a bulb needs replacement, ensure the vehicle is off and the battery is disconnected. Handle HID bulbs with care, avoiding touching the glass with bare hands.

Image 7.1: View highlighting the sealed structure of the headlight, designed to prevent moisture and dust intrusion.

8. Troubleshooting

If you encounter issues with your headlight assembly, consider the following:

• Headlight Not Working:
  • Check the electrical connection to the headlight assembly.
  • Verify the HID bulb is correctly seated and not burnt out.
  • Inspect the vehicle's fuses related to the headlight system.
  • Ensure the ballast (if external) is functioning correctly.
• Dim or Flickering Light:
  • This could indicate a failing HID bulb or ballast.
  • Check for loose or corroded electrical connections.
• Moisture Inside Headlight:
  • Small amounts of condensation can occur due to temperature changes and usually dissipate.
  • If significant moisture or water accumulation is present, inspect the seals and housing for damage. Ensure the rear caps are securely fastened.

If troubleshooting steps do not resolve the issue, contact customer support or a qualified technician.

9. Specifications

10. Warranty and Support

This Partzer headlight assembly comes with a 1-year manufacturer's warranty.

Should any issue arise, our resolution process is designed for swift action. Please reach out to the seller or manufacturer directly for assistance. Provide your purchase details and a description of the issue to facilitate a quick resolution.

For further support or inquiries, please refer to the contact information provided with your purchase or visit the official Partzer brand store.